Hitachi Projector CP-WX8650 User Manual
Have a look at the manual Hitachi Projector CP-WX8650 User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 913 Hitachi manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
61 EASY MENU ItemDescription ECO MODE Using the ◄/► buttons turns off/on the Eco mode. See the ECO MODE item in SETUP menu ( 75 ). INSTALLATION Pressing the ► button displays the INSTALLATION dialog. See the INSTALLATION item in SETUP menu ( 77 ). RESET Performing this item resets all of the EASY MENU items except the FILTER TIME and LANGUAGE. A dialog is displayed for confirmation. Selecting the OK using the ► button performs resetting. FILTER TIME The usage time of the air filter is shown in the menu. Performing this item resets the filter time which counts usage time of the air filter. A dialog is displayed for confirmation. Selecting the OK using the ► button performs resetting. See the FILTER TIME item in SETUP menu ( 76 ). LANGUAGE Using the ◄/► buttons changes the display language. See the LANGUAGE item in SCREEN menu ( 81 ). ADVANCED MENUPress the ► or ENTER button to use the menu of PICTURE, IMAGE, INPUT, SETUP, AUDIO, SCREEN, OPTION, NETWORK or SECURITY. EXIT Press the ◄ or ENTER button to finish the OSD menu.
62 PICTURE menu PICTURE menu From the PICTURE menu, items shown in the table below can be performed. Select an item using the ▲/▼ cursor buttons, and press the ► cursor button or ENTER button to execute the item. Then perform it according to the following table. ItemDescription BRIGHTNESS Using the ◄/► buttons adjusts the brightness. Dark ó Light CONTRAST Using the ◄/► buttons adjusts the contrast. Weak ó Strong COLOR Using the ◄/► buttons adjusts the strength of whole color. Weak ó Strong TINT Using the ◄/► buttons adjusts the tint. Reddish ó Greenish SHARPNESS Using the ◄/► buttons adjusts the sharpness. Weak ó Strong • There may be some noise and/or the screen may flicker for a moment when an adjustment is made. This is not a malfunction. ACTIVE IRIS Using the ▲/▼ cursor buttons changes the active iris control mode. PRESENTATION ó THEATER ó OFF PRESENTATION : The active iris displays the best presentation image for both bright and dark scenes. THEATER : The active iris displays the best theater image for both bright and dark scenes. OFF : The active iris is always open. • The screen may flicker when the PRESENTATION or THEATER modes are selected. If this occurs select OFF. (continued on next page)
63
PICTURE menu
ItemDescription
PICTURE QUALITY Selecting this item displays the PICTURE
QUALITY menu.
Select an item using the ▲/▼ buttons,
and press the ► button or the ENTER
button on the remote control to execute
the item.
PICTURE MODE
STANDARD ó NATURAL
ó CINEMA
ó DYNAMIC
USER-3 BOARD(BLACK)
USER-2 BOARD(GREEN)
USER-1 ó DICOM SIM.
ó DAYTIME
ó WHITEBOARD
After selecting USER-1 / USER-2 / USER-3, the following features
are adjustable.
Gamma, Color Temp
GAMMA
This feature is only available when USER-1 / USER-2 / USER-3 is
selected.
Using the ▲/▼ buttons switches the gamma mode. DEFAULT-1 ó CUSTOM-1
ó DEFAULT-2
ó CUSTOM-2
CUSTOM-8 DEFAULT-3
DEFAULT-8 CUSTOM-3
CUSTOM-7 DEFAULT-4
DEFAULT-7 CUSTOM-4
CUSTOM-6 ó DEFAULT-6
ó CUSTOM-5
ó DEFAULT-5
(continued on next page)
64
PICTURE menu
ItemDescription
PICTURE QUALITY
(continued) GAMMA (continued)
Selecting a mode whose name includes CUSTOM and then
pressing the ► button or the
ENTER button displays
a dialog to aid you in adjusting the mode. This function is useful
when you want to change the brightness of particular tones.
Choose an item using the ◄/► buttons, and adjust the level using
the ▲/▼ buttons.
• Lines or other noise might appear on the screen when this function
is operated, but it is not a malfunction.
COLOR TEMP
This feature is only available when USER-1 / USER-2 / USER-3 is
selected.
Using the ▲/▼ buttons switches the color temperature mode.
HIGH
ó
CUSTOM-1
ó
MID-1
ó
CUSTOM-2
CUSTOM-7 MID-2
HIGHBRIGHT-3 CUSTOM-3
CUSTOM-6 LOW
HIGHBRIGHT-2 ó CUSTOM-5
ó HIGHBRIGHT-1
ó CUSTOM-4
Selecting a mode whose name includes CUSTOM and then pressing
the ► button or the
ENTER button displays a dialog to aid you in
adjusting the OFFSET and GAIN of the selected mode.
OFFSET adjustments change the color intensity on the whole tones.
GAIN adjustments mainly affect color intensity on the brighter tones.
Choose an item using the ◄/► buttons, and adjust the level using
the ▲/▼ buttons.
• Lines or other noise might appear on the screen when this function
is operated, but it is not a malfunction.
(continued on next page)
65 PICTURE menu ItemDescription PICTURE QUALITY (continued) ACCENTUALIZER ACCENTUALIZER is a function to improve the legibility. Using the ◄/► buttons adjusts the sharpness. Weak ó Strong • There may be some noise and/or the screen may flicker for a moment when an adjustment is made. This is not a malfunction. • This function may not work properly when IMAGE OPTIMIZER is enabled. HDCR A function to show a clear picture in a bright room. Using the ◄/► buttons adjusts the contrast. • This function may not work properly when IMAGE OPTIMIZER is enabled. COLOR MANAGEMENT A function to adjust color phase, color saturation, and brightness respectively for red, yellow, green, cyan, blue, and magenta. MY MEMORY This projector has 4 memories for adjustment data (for all the items of the PICTURE menu). Selecting a function using the ▲/▼ buttons and pressing the ► or ENTER button performs each function. SAVE-1 ó SAVE-2 ó SAVE-3 ó SAVE-4 LOAD-4 ó LOAD-3 ó LOAD-2 ó LOAD-1 SAVE-1, SAVE-2, SAVE-3, SAVE-4 Performing a SAVE function saves the current adjustment data into the memory linked in the number included in the function’s name. • Remember that the current data being stored of a memory will be lost by saving new data into the memory. LOAD-1, LOAD-2, LOAD-3, LOAD-4 Performing a LOAD function loads the data from the memory linked in the number included in the function’s name, and adjusts the picture automatically depending on the data. • The LOAD functions whose linked memory has no data are skipped. • Remember that the current adjusted condition will be lost by loading data. If you want to keep the current adjustment, please save it before performing a LOAD function. • There may be some noise and the screen may flicker for a moment when loading data. This is not malfunction. • You can perform the LOAD function using MY BUTTON. Please see MY BUTTON item in OPTION menu ( 89 ).
66
IMAGE menu
IMAGE menu
From the IMAGE menu, items shown in the table
below can be performed.
Select an item using the ▲/▼ cursor buttons, and
press the ► cursor button or ENTER button to
execute the item. Then perform it according to the
following table for selected port.
ItemDescription
ASPECT Using the ▲/▼ buttons switches the mode for aspect ratio.
For a computer signal CP-X8800:
NORMAL
ó 4:3
ó 16:9
ó 16:10
CP-WU8600, CP-WX8650, CP-WU8700, CP-WX8750:
NORMAL
ó 4:3
ó 16:9
ó 16:10
ó NATIVE
For HDMITM, HDBaseT™, and DisplayPort signals
CP-X8800:
NORMAL
ó 4:3
ó 16:9
ó 16:10
ó 14:9
CP-WU8600, CP-WX8650, CP-WU8700, CP-WX8750:
NORMAL
ó 4:3
ó 16:9
ó 16:10
ó 14:9
ó NATIVE
For a video signal
CP-X8800:
4:3
ó 16:9
ó 14:9
CP-WU8600, CP-WX8650, CP-WU8700, CP-WX8750:
4:3
ó 16:9
ó 16:10
ó 14:9
ó NATIVE
For an SDI signal
(CP-WU8700 only)
NORMAL
ó 4:3
ó 16:9
For an input signal from the LAN port, or if there is no signal
CP-X8800: 4:3 (fixed)
CP-WU8600, CP-WX8650, CP-WU8700, CP-WX8750: 16:10 (fixed)
• The NORMAL mode keeps the orig inal aspect ratio of the signal.
(continued on next page)
67 IMAGE menu ItemDescription OVER SCAN Using the ◄/► buttons adjusts the over-scan ratio. Small (It magnifies picture) ó Large (It reduces picture) • This item can be selected for a video signal and an SDI signal. • For HDMITM, HDBaseTTM, and DisplayPort signals, this item can also be selected if either (1) or (2) applies. (1) DIGITAL FORMAT item in the INPUT menu for selected port is set to VIDEO. (2) DIGITAL FORMAT item in the INPUT menu for selected port is set to AUTO, and the projector recognizes that it receives video signals. V POSITION Using the ◄/► buttons adjusts the vertical position. Down ó Up • Over-adjusting the vertical position may cause noise to appear on the screen. If this occurs, please reset the vertical position to the default setting. Pressing the RESET button when the V POSITION is selected will reset the V POSITION to the default setting. • When this function is performed on a video signal, the range of this adjustment depends on OVER SCAN ( above ) setting. It is not possible to adjust when OVER SCAN is set to 10. • This function is unavailable for a signal from the LAN, HDMI 1 / 2, HDBaseT, DisplayPort , or SDI port. H POSITION Using the ◄/► buttons adjusts the horizontal position. Right ó Left • Over-adjusting the horizontal position may cause noise to appear on the screen. If this occurs, please reset the horizontal position to the default setting. Pressing the RESET button when the H POSITION is selected will reset the H POSITION to the default setting. • When this function is performed on a video signal, the range of this adjustment depends on OVER SCAN ( above ) setting. It is not possible to adjust when OVER SCAN is set to 10. • This function is unavailable for a signal from the LAN, HDMI 1 / 2, HDBaseT, DisplayPort , or SDI port. (continued on next page)
68 IMAGE menu ItemDescription H PHASE Using the ◄/► buttons adjusts the horizontal phase to eliminate flicker. Right ó Left • This item can be selected only for a computer signal or a component video signal. This function is unavailable for a signal from the LAN, HDMI TM 1 / 2, HDBaseTTM, DisplayPort , or SDI port. H SIZE Using the ◄/► buttons adjusts the horizontal size. Small ó Large • This item can be selected only for a computer signal. This function is unavailable for a signal from the LAN, VIDEO, HDMI 1 / 2, HDBaseT, DisplayPort , or SDI port. • When this adjustment is excessive, the picture may not be displayed correctly. In such a case, please reset the adjustment by pressing the RESET button on the remote control during this operation. • Images might appear degraded when this function is operated, but it is not a malfunction. AUTO ADJUST EXECUTE Selecting this item performs the automatic adjustment feature. For a computer signal The vertical position, the horizontal position and the horizontal phase will be automatically adjusted. Make sure that the application window is set to its maximum size prior to attempting to use this feature. A dark picture may still be incorrectly adjusted. Use a bright picture when adjusting. For a video signal The video format best suited for the respective input signal will be selected automatically. This function is available only when the AUTO is selected for the VIDEO FORMAT item in the INPUT menu ( 70 ). The vertical position and horizontal position will be automatically set to the default. • The automatic adjustment operation requires approx. 10 seconds. Also please note that it may not function correctly with some input. • When this function is performed for a video signal, a certain extra such as a line may appear outside a picture. • When this function is performed for a computer signal, a black frame may be displayed on the edge of the screen, depending on the computer model. • The items adjusted by this function may vary when the FINE or DISABLE is selected for the AUTO ADJUST item of the SERVICE item in the OPTION menu ( 93 ).
69
INPUT menu
INPUT menu
From the INPUT menu, items shown in the table
below can be performed.
Select an item using the ▲/▼ cursor buttons, and
press the ► cursor button or ENTER button to
execute the item. Then perform it according to the
following table.
ItemDescription
PROGRESSIVE Using the ▲/▼ buttons switches the progress mode.
TV ó FILM
ó OFF
• This function works only for a video signal, component video signal
(of 480i@60 or 576i@50 or 1080i@50/60), an HDMITM signal
(of 480i@60 or 576i@50 or 1080i@50/60) and HDBaseTTM signal
(of 480i@60 or 576i@50 or 1080i@50/60).
• When TV or FILM is selected, the screen image will be sharp.
FILM adapts to the 2-3 Pull-Down conversion system. But these
may cause a certain defect (for example, jagged line) of the picture
for a quick moving object. In such a case, please select OFF, even
though the screen image may lose sharpness.
VIDEO NR Using the ▲/▼ buttons switches the noise reduction mode.
HIGH ó MID
ó LOW
• This function works only for a video signal, component video signal
(of 480i@60 or 576i@50 or 1080i@50/60), an HDMITM signal
(of 480i@60 or 576i@50 or 1080i@50/60) and HDBaseTTM signal
(of 480i@60 or 576i@50 or 1080i@50/60).
COLOR SPACE Using the ▲/▼ buttons switches the mode for color space.
AUTO ó RGB
ó SMPTE240
ó REC709
ó REC601
• This item can be selected only for a computer signal (except for
signals from the LAN and HDBaseT ports).
• The AUTO mode automatically selects the optimum mode.
• The AUTO operation may not work well at some signals. In such a
case, it might be good to select a suitable mode except AUTO.
(continued on next page)
70
INPUT menu
ItemDescription
VIDEO FORMAT The video format for
VIDEO port can be set.
Using the ◄/► buttons
switches the mode for video
format.
AUTO ó NTSC
ó PAL
ó SECAM
N-PAL ó M-PAL
ó NTSC4.43
• This item is performed only for a video signal from the VIDEO port.
• The AUTO mode automatically selects the optimum mode.
• The AUTO operation may not work well for some signals. If the
picture becomes unstable (e.g. an irregular picture, lack of color),
please select the mode according to the input signal.
DIGITAL FORMAT
The digital format of HDMITM input signals from the HDMI 1/2,
HDBaseTTM, and DisplayPort ports can be set.
(1) Use the ▲/▼ buttons to
select the port to be set.
(2) Use the ◄/►buttons to
select the digital format.
AUTO ó VIDEO
ó COMPUTER
AUTO: automatically sets the optimum mode.
VIDEO: sets the suitable mode for DVD signals.
COMPUTER: sets the suitable mode for computer signals.
• When the COMPUTER is selected, the function OVER SCAN
(IMAGE menu) is unavailable.
DIGITAL RANGE
The digital range of HDMITM input signals from the HDMI 1/2,
HDBaseTTM, DisplayPort, and SDI ports can be set.
(1) Use the ▲/▼ buttons to select the port to be set.
(2) Use the ◄/►buttons to select the digital range.
AUTO ó NORMAL
ó ENHANCED
AUTO: automatically sets the optimum mode.
NORMAL: sets the suitable mode for DVD signals. (16-235)
ENHANCED : sets the suitable mode for computer signals. (0-255)
((1-254) for SDI)
• If the contrast of the screen image is too strong or too weak, try
finding a more suitable mode.
(continued on next page)
CP-WU8700
CP-WU8600/CP-WX8650
CP-WX8750/CP-X8800