Honeywell 1202g2 Manual

							10 - 19
Code 11 Check Digits Required 1 Check Digit Required C11CK208-15
*2 Check Digits Required C11CK218-15
Auto Select Check Digits Required C11CK228-15
Check Digit Validation Validate and Transmit One Check Digit C11CK238-16
Validate and Transmit Two Check Digits C11CK248-16
Validate and Transmit Auto Select Check 
DigitsC11CK258-16
Code 11 Redundancy Range (0 - 10) *0 C11VOT##8-16
Code 11 Message Length Minimum (1 - 80)  *3 C11MIN##8-16
Maximum (1 - 80)  *80 C11MAX##8-16
Code 128 Default All Code 128
Settings128DFT8-17
Off 128ENA08-17
*On 128ENA18-17
128 Group Separator Output *Off 128GSE08-17
On 128GSE18-17
Code 128 Redundancy Range (0 - 10) *0 128VOT##8-17
Code 128 Message Length Minimum (1 - 80)  *3 128MIN##8-18
Maximum (1 - 80)  *80 128MAX##8-18
ISBT 128 *Off ISBENA08-18
On ISBENA18-18
Concatenation Timeout DLYCCT8-18
ISBT128 Predefined Concatenation 
Sequences* Donation ID Number (001)
and ABO/RhD Blood Groups (002)ISBPCS08-19
Donation ID Number (001) and
Donor ID Number (019)ISBPCS18-19
Donation ID Number (001) and 
Confidential Unit Exclusion StatusISBPCS28-19
Product Code (003) and Expiration Date 
(Form 1)ISBPCS38-19
Product Code (003) and Expiration Date 
(Form 2)ISBPCS48-19
Product Code (003) and Expiration Date 
(Form 3)ISBPCS58-19
Product Code (003) and Expiration Date 
(Form 4)ISBPCS68-19
ISBT 128 Predefined Concatenation 
Sequences On/Off*Off ISBPCE08-20
Allow Predefined Sequence ISBPCE18-20
Require Predefined Sequence ISBPCE28-20
ISBT 128 User-Defined Concatenation 
Sequences1st Left Identifier (0-255) *0 ISBUL1##8-20
2nd Left Identifier (0-255) *0 ISBUL2##8-21
1st Right Identifier (0-255) *0 ISBUR1##8-21
2nd Right Identifier (0-255) *0 ISBUR2##8-21 SelectionSetting
* Indicates default
Serial Command
# Indicates a numeric entryPage 
						

							10 - 20
ISBT 128 User-Defined Concatenation 
Sequences On/Off*Off ISBUCE08-21
Allow User-Defined Sequence ISBUCE18-21
Require User-Defined Sequence ISBUCE28-21
Content Verification *Off ISBXM008-21
On ISBXM018-21
Transmit Identifiers Off ISBXM108-22
*On ISBXM118-22
Flag Conversion *Off ISBXM208-22
On ISBXM218-22
GS1-128 Default All GS1-128 Settings GS1DFT8-23
*On GS1ENA18-23
Off GS1ENA08-23
GS1-128 Application Identifier Parsing *Off GS1EMU08-23
Transmit Without Identifiers GS1EMU18-23
Transmit With Identifiers GS1EMU28-23
GS1-128 Redundancy Range (0 - 10) *0 GS1VOT##8-23
GS1-128 Message Length Minimum (1 - 80)  *3 GS1MIN8-24
Maximum (0 - 80)  *80 GS1MAX8-24
Telepen Default All Telepen
SettingsTELDFT8-24
*Off TELENA08-24
On TELENA18-24
Telepen Output *AIM Telepen Output TELOLD08-24
Original Telepen Output TELOLD18-24
Telepen Redundancy Range (0 - 10) *0 TELVOT##8-25
Telepen Message Length Minimum (1 - 80)  *3 TELMIN##8-25
Maximum (1 - 80)  *80 TELMAX##8-25
UPC-A Default All 
UPC-A SettingsUPADFT8-25
Off UPBENA08-25
*On UPBENA18-25
UPC-A Number System Off UPANSX08-26
*On UPANSX18-26
UPC-A Check Digit Off UPACKX08-26
*On UPACKX18-26
UPC-A 2 Digit Addenda *Off UPAAD208-26
On UPAAD218-26
UPC-A 5 Digit Addenda *Off UPAAD508-27
On UPAAD518-26
UPC-A Addenda Required *Not Required UPAARQ08-27
Required UPAARQ18-27
Addenda Timeout Range (0 - 65535) *100 DLYADD#####8-27 SelectionSetting
* Indicates default
Serial Command
# Indicates a numeric entryPage 
						

							10 - 21
UPC-A Addenda 
Separator*Off UPAADS08-27
On UPAADS18-27
UPC-A Redundancy Range (0 - 10) *0 UPAVOT##8-28
UPC-A/EAN-13 with Extended Coupon 
Code*Off CPNENA08-28
Allow Concatenation CPNENA18-28
Require Concatenation CPNENA28-28
UPC-A Number System 4 Addenda 
Required* Don’t Require Coupon Code ARQSY408-28
Require Coupon Code ARQSY418-28
UPC-A Number System 5 Addenda 
Required* Don’t Require Coupon Code/Addenda ARQSY508-29
Require 2 Digit Addenda ARQSY518-29
Require 5 Digit Addenda ARQSY528-29
Require 2 or 5 Digit Addenda ARQSY538-29
Require Coupon Code ARQSY548-29
Require Coupon Code or 2 Digit Addenda ARQSY558-29
Require Coupon Code or 5 Digit Addenda ARQSY568-29
Require Coupon Code, 2 Digit Addenda, 
or 5 Digit AddendaARQSY578-30
Addenda Timeout Range (0 - 65535) *100 DLYADD#####8-30
UPC-E0 Default All UPC-E
SettingsUPEDFT8-30
Off UPEEN008-30
*On UPEEN018-30
UPC-E0 Expand *Off UPEEXP08-30
On UPEEXP18-30
UPC-E0 Number System *On UPEEXN18-31
Off UPEEXN08-31
UPC-E0 Check Digit *Off UPECKX08-31
On UPECKX18-31
UPC-E0 Leading Zero *Off UPENSX08-31
On UPENSX18-31
UPC-E0 Addenda 2 Digit Addenda On UPEAD218-32
*2 Digit Addenda Off UPEAD208-32
5 Digit Addenda On UPEAD518-32
*5 Digit Addenda Off UPEAD508-32
UPC-E0 Addenda Required Required UPEARQ18-32
*Not Required UPEARQ08-32
Addenda Timeout Range (0 - 65535) *100 DLYADD#####8-32
UPC-E0 Addenda Separator On UPEADS18-33
*Off UPEADS08-33
UPC-E0 Redundancy Range (0 - 10) *1 UPEVOT##8-33 SelectionSetting
* Indicates default
Serial Command
# Indicates a numeric entryPage 
						

							10 - 22
EAN/JAN-13 Default All EAN/
JAN SettingsE13DFT8-33
Off E13ENA08-30
*On E13ENA18-30
Convert UPC-A to EAN-13 UPC-A Converted to EAN-13 UPAENA08-33
*Do not Convert UPC-A UPAENA18-33
EAN/JAN-13 Check Digit Off E13CKX08-34
*On E13CKX18-33
EAN/JAN-13 2 Digit Addenda 2 Digit Addenda On E13AD218-34
*2 Digit Addenda Off E13AD208-34
5 Digit Addenda On E13AD518-34
*5 Digit Addenda Off E13AD508-34
EAN/JAN-13 Addenda Required *Not Required E13ARQ08-35
Required E13ARQ18-34
EAN-13 Beginning with 2 Addenda 
Required* Don’t Require 2 Digit Addenda ARQSY208-35
Require 2 Digit Addenda ARQSY218-35
EAN-13 Beginning with 290 Addenda 
Required* Don’t Require 5 Digit Addenda ARQ29008-35
Require 5 Digit Addenda ARQ29018-35
EAN-13 Beginning with 378/379 
Addenda Required* Don’t Require Addenda ARQ37808-36
Require 2 Digit Addenda ARQ37818-36
Require 5 Digit Addenda ARQ37828-36
Require 2 or 5 Digit Addenda ARQ37838-36
EAN-13 Beginning with 414/419 
Addenda Required* Don’t Require Addenda ARQ41408-36
Require 2 Digit Addenda ARQ41418-36
Require 5 Digit Addenda ARQ41428-37
Require 2 or 5 Digit Addenda ARQ41438-37
EAN-13 Beginning with 434/439 
Addenda Required* Don’t Require Addenda ARQ43408-37
Require 2 Digit Addenda ARQ43418-37
Require 5 Digit Addenda ARQ43428-37
Require 2 or 5 Digit Addenda ARQ43438-37
EAN-13 Beginning with 977 Addenda 
Required* Don’t Require 2 Digit Addenda ARQ97708-38
Require 2 Digit Addenda ARQ97718-38
EAN-13 Beginning with 978 Addenda 
Required* Don’t Require 5 Digit Addenda ARQ97808-38
Require 5 Digit Addenda ARQ97818-38
EAN-13 Beginning with 979 Addenda 
Required* Don’t Require 5 Digit Addenda ARQ97908-38
Require 5 Digit Addenda ARQ97918-38
Addenda Timeout Range (0 - 65535) *100 DLYADD#####8-39
EAN/JAN-13 Addenda 
Separator*Off E13ADS08-39
On E13ADS18-39
EAN/JAN-13 Redundancy Range (0 - 10) *0 E13VOT##8-39 SelectionSetting
* Indicates default
Serial Command
# Indicates a numeric entryPage 
						

							10 - 23
ISBN Translate *Off E13ISB08-40
On E13ISB18-39
Convert to 13-Digit On E13I1318-40
*Convert to 13-Digit Off E13I1308-40
Reformat On E13IBR18-40
*Reformat Off E13IBR08-40
ISSN Translate *Off E13ISS08-40
On E13ISS18-40
Reformat On E13ISR18-41
*Reformat Off E13ISR08-41
EAN/JAN-8 Default All EAN/
JAN 8 SettingsEA8DFT8-41
Off EA8ENA08-41
*On EA8ENA18-41
EAN/JAN-8 Check Digit Off EA8CKX08-41
*On EA8CKX18-41
EAN/JAN-8 Addenda *2 Digit Addenda Off EA8AD208-42
2 Digit Addenda On EA8AD218-42
*5 Digit Addenda Off EA8AD508-42
5 Digit Addenda On EA8AD518-42
EAN/JAN-8 Addenda Required *Not Required EA8ARQ08-42
Required EA8ARQ18-42
Addenda Timeout Range (0 - 65535) *100 DLYADD#####8-42
EAN/JAN-8 Addenda 
Separator*Off EA8ADS08-43
On EA8ADS18-43
EAN/JAN-8 Redundancy Range (0 - 10) *0 EA8VOT##8-43
MSI Default All MSI Settings MSIDFT8-43
*Off MSIENA08-43
On MSIENA18-43
MSI Check Character *Validate Type 10, but Don’t Transmit MSICHK08-44
Validate Type 10 and 
TransmitMSICHK18-44
Validate 2 Type 10 Chars, but Don’t 
TransmitMSICHK28-44
Validate 2 Type 10 Chars and Transmit MSICHK38-44
Validate 11 Type 10 Chars, but Don’t 
TransmitMSICHK48-44
Validate 11 Type 10 Chars and Transmit MSICHK58-44
Disable MSI Check Characters MSICHK68-44
MSI Redundancy Range (0 - 10) *0 MSIVOT##8-44
MSI Message Length Minimum (1 - 80) *3 MSIMIN##8-45
Maximum (1 - 80) *80 MSIMAX##8-45 SelectionSetting
* Indicates default
Serial Command
# Indicates a numeric entryPage 
						

							10 - 24
Plessey Code Default All 
Plessey Code SettingsPLSDFT8-45
Off PLSENA08-45
*On PLSENA18-45
Plessey Check Char.*No Check Char. PLSCHK08-45
Validate, But Don’t 
TransmitPLSCHK18-45
Validate, 
and TransmitPLSCHK28-45
Plessey Redundancy Range (0 - 10) *0 PLSVOT##8-46
Plessey Message Length Minimum (1 - 80)  *3 PLSMIN##8-46
Maximum (1 - 80)  *80 PLSMAX##8-46
GS1 DataBar Omnidirectional Default All 
GS1 DataBar Omnidirectional SettingsRSSDFT8-46
Off RSSENA08-46
*On RSSENA18-46
GS1 DataBar Omnidirectional 
RedundancyRange (0 - 10) *0 RSSVOT##8-47
GS1 DataBar Limited Default All GS1 DataBar Limited Settings RSLDFT8-47
Off RSLENA08-47
*On RSLENA18-47
GS1 DataBar Limited Redundancy Range (0 - 10) *0 RSLVOT##8-47
GS1 DataBar Expanded Default All GS1 DataBar 
Expanded SettingsRSEDFT8-48
Off RSEENA08-48
*On RSEENA18-48
GS1 DataBar Expanded Redundancy Range (0 - 10) *0 RSEVOT##8-48
GS1 DataBar Expanded Msg. Length Minimum (1 - 80) *3 RSEMIN##8-48
Maximum (1 - 80) *80 RSEMAX##8-48
Trioptic Code *Off TRIENA08-49
On TRIENA18-48
GS1 Emulation GS1-128 Emulation EANEMU18-49
GS1 DataBar Emulation EANEMU28-49
GS1 Code Expansion Off EANEMU38-49
EAN8 to EAN13 Conversion EANEMU48-49
*GS1 Emulation Off EANEMU08-49
Postal Codes
China Post (Hong Kong 2 of 5)  Default All China Post (Hong Kong 2 of 5) 
SettingsCPCDFT8-50
*Off CPCENA08-50
On CPCENA18-50
China Post (Hong Kong 2 of 5) 
RedundancyRange (0 - 10) *0 CPCVOT##8-50 SelectionSetting
* Indicates default
Serial Command
# Indicates a numeric entryPage 
						

							10 - 25
China Post (Hong Kong 2 of 5) Msg. 
LengthMinimum (1 - 80) *3 CPCMIN##8-50
Maximum (1 - 80) *80 CPCMAX##8-50
Utilities
Add Code I.D. Prefix to All Symbologies (Temporary) PRECA2,BK2995C80!9-1
Show Software Revision Revision of Scanner REVINF9-1
Revision of Base :*:REVINF9-1
Show Data Format DFMBK3?9-1
Test Menu On TSTMNU19-1
*Off TSTMNU09-1
Resetting the Factory Defaults Remove Custom Defaults DEFOVR9-3
Activate Defaults  DEFALT9-3
Serial Trigger Commands
Read Time-Out 0 - 300,000 
*30,000 msTRGSTO####10-3 SelectionSetting
* Indicates default
Serial Command
# Indicates a numeric entryPage 
						

							10 - 26 
						

							11 - 1
11
Product Specifications
Voyager 1200g Product Specifications
Parameter Specification
Mechanical
Height
3.8 in. (97mm)
Length
7.1 in. (180mm)
Width
2.6 in. (66mm)
Weight
4.41 oz. (125g)
Electrical
Input Voltage
5V + 5%
Operating Power
700mW; 140 mA (typical) @ 5V
Standby Power
350mW; 70 mA (typical) @ 5V
Environmental
Operating Temperature
32°F to 122°F (0°C to 50°C)
Storage Temperature
-4°F to 140°F (-20°C to 60°C)
Humidity
0 to 95% non-condensing
Drop
Operational after 30 drops to concrete from 5 ft. (1.5m)
Environmental Sealing
IP42
Light Levels
0 - 70,000 lux (direct sunlight)
ESD
16kV, 9kV contact
Scan Performance
Scan Pattern
Single scan line
Scan Angle
Horizontal: 30°
Scan Speed
100 scan lines per second
Print Contrast
10% minimum reflectance difference
Pitch, Skew
60°, 60°
Decode Capabilities
Reads standard 1D and GS1 DataBar symbologies
DOF with 3.5 mil resolution at standard range
Typical Performance
5 mil Code 39 27 - 151mm (1.1 - 5.9 in.)
7.5 mil Code 39 16 - 216mm (.6 - 8.5 in.)
10.4 mil Code 39 0 - 277mm (0 - 10.9 in.)
13 mil UPC-A 0 - 311mm (0 - 12.2 in.)
20 mil Code 39 0 - 367mm (0 - 14.4 in.)
Guaranteed Performance5 mil Code 39 38 - 132mm (1.5 - 5.2 in.)
7.5 mil Code 39 26 - 189mm (1 - 7.4 in.)
10.4 mil Code 39 0 - 229mm (0 - 9 in.)
13 mil UPC-A 0 - 253mm (0 - 10 in.)
20 mil Code 39 0 - 293mm (0 - 11.5 in.)
Laser Beam
Wavelength
645 - 660 nm
Divergence
< 1.5 mrad. per IEC 60825-1 worst case 
						

							11 - 2
Voyager 1202g and Voyager 1202g-BF Product Specifications
Maximum Power Output
< 1 mw
Embedded Laser
Wavelength
645 - 660 nm
Divergence
< 1.5 mrad. per IEC 60825-1 worst case
Maximum Power Output
10 mw
Parameter Specification
Mechanical
Height
3.6 in. (92mm)
Length
7.1 in. (180mm)
Width
2.6 in. (66mm)
Weight (1202g includes bat-
tery)6.3 oz. (180g) 
Weight (1202g-BF)
5.6 oz. (160g)
Battery (Voyager 1202g Only)
Lithium Ion
1800 mAHr minimum
Number of Scans
Up to 45,000 per charge
Expected Hours of Operation
12
Expected Charge Time4 hours (external supply)
8 hours (USB power)
Instant Charge Pack (Voyager 1202g-BF Only)
Number of ScansAt least 35 scans with one scan every six seconds
At least 100 scans with one scan every second
Use Time per Full Charge
2-6 minutes depending on use
Expected Full Charge TimeLess than 35 seconds via wall adapter
Less than 90 seconds via USB power
Radio
Frequency
2.4 to 2.5 GHz (ISM Band) Frequency Hopping Bluetooth v.2.1
Range
33 ft. (10 m) typical line of sight
Data Rate
Up to 3 MBps
Environmental
Temperature Ranges 
for Voyager 1202g:
   Operating - Charging
41° F to +104° F (5° C to 40° C)
   Operating - Non-Charging
32° F to +122° F (0° C to 50° C)
   Storage
23°F to +95°F (-5°C to 35°C)
   Humidity
0 to 95% relative humidity, non-condensing
Temperature Ranges 
for Voyager 1202g-BF:
   Operating - Charging
32° F to +122° F (0° C to 50° C)
   Operating - Non-Charging
32° F to +122° F (0° C to 50° C)
   Storage-4°F to 140°F (-20°C to 60°C)*
*High storage temperature will degrade the performance of the instant charge pack.
   Humidity
0 to 95% relative humidity, non-condensing
Mechanical Drop
Designed to withstand 30 drops from 5 feet (1.5m) to concrete
Environmental Sealing
IP42
Parameter Specification