Honeywell 20205 Manual

™ 
2020/3820/3820i
Cordless System
User’s Guide 

Disclaimer
Honeywell International Inc. (“Honeywell”) reserves the right to make changes 
in specifications and other information contained in this document without prior 
notice, and the reader should in all cases consult Honeywell to determine 
whether any such changes have been made.  The information in this publication 
does not represent a commitment on the part of Honeywell.
Honeywell shall not be liable for technical or editorial errors or omissions con-
tained herein; nor for incidental or...

Product Agency Compliance
USA
FCC Part 15 Subpart C
This device complies with part 15 of the FCC Rules.  Operation is subject to 
the following two conditions:
1. This device may not cause harmful interference.
2. This device must accept any interference received, including interference 
that may cause undesired operation.
Caution: Any changes or modifications made to this equipment not 
expressly approved by Honeywell may void the FCC authorization 
to operate this equipment.
Use only shielded data...

c-UL Statement
C-UL listed: CSA C22.2 No.60950-1-03, 2nd Edition for I.T.E. product safety.
Europe
The CE marking on the product indicates that this device is in 
conformity with all essential requirements of the 1999/5/EC R&TTE 
Directive.  In addition, complies to 2006/95/EC Low Voltage Directive, 
when shipped with recommended power supply.
For CE-related inquiries, please contact:
Honeywell Imaging & Mobility Europe BV
International Inc.
Nijverheidsweg 9-13
5627 BT Eindhoven
The Netherlands
Honeywell...

If you need more information on the collection, reuse, and recycling systems, 
please contact your local or regional waste administration.
You may also contact your supplier for more information on the 
environmental performances of this product.
Germany
If your product is marked with the GS symbol, then the product has 
been issued a GS certificate showing compliance to EN 60950-1, 
Second Edition.
This device is not intended for use in direct field of view at visual 
display workplaces. To avoid...

Brazil (3820i, 2020-5 Scanner and AP-010BT)
This product is approved by Anatel, according to the procedures regulated 
by Resolution No. 242/2000 and meets the technical requirements applied.
Este produto está homologado pela ANATEL, de acordo com os 
procedimentos regulamentados pela Resolução No. 242/2000 e atende aos 
requisitos técnicos aplicados.
Para maiores informações, consulte o site da ANATEL – www.anatel.gov.br
 
Japan
Complies with Technical Regulations Conformity Certification of 
Specified...

 Do not disassemble or modify batteries.     
Caution:  
Danger of explosion if batteries are incorrectly replaced.  Replace only 
with the same or equivalent type recommended by the manufacturer.  
Dispose of used batteries according to the recycle program for batteries 
as directed by the governing agency for the country where the batteries 
are to be discarded.
LED Safety Statement
Scanner LEDs have been tested and classified as “EXEMPT RISK GROUP” 
to the standard: IEC 62471:2006.
Radio Technology...

Required Safety Labels
Scanner
Compliance 
Label locations
Item Number, 
Serial Number 
and Revision 
Information 
location 

Base
Compliance 
Label locations
Item Number, 
Serial Number 
and Revision 
Information 
location