Honeywell 20205 Manual

							™ 
2020/3820/3820i
Cordless System
User’s Guide 
						

							Disclaimer
Honeywell International Inc. (“Honeywell”) reserves the right to make changes 
in specifications and other information contained in this document without prior 
notice, and the reader should in all cases consult Honeywell to determine 
whether any such changes have been made.  The information in this publication 
does not represent a commitment on the part of Honeywell.
Honeywell shall not be liable for technical or editorial errors or omissions con-
tained herein; nor for incidental or consequential damages resulting from the 
furnishing, performance, or use of this material.
This document contains proprietary information that is protected by copyright.  
All rights are reserved.  No part of this document may be photocopied, repro-
duced, or translated into another language without the prior written consent of 
Honeywell.
© 2004-2011 Honeywell International Inc.  All rights reserved.
Other product names or marks mentioned in this document may be trademarks 
or registered trademarks of other companies and are the property of their 
respective owners.
Web Address:
 www.honeywellaidc.comw.honeywell.com/aidc
Microsoft® Windows® and the Windows logo are trademarks or registered 
trademarks of Microsoft Corporation.
The 
Bluetooth® word mark and logos are owned by Bluetooth SIG, Inc. 
						

							Product Agency Compliance
USA
FCC Part 15 Subpart C
This device complies with part 15 of the FCC Rules.  Operation is subject to 
the following two conditions:
1. This device may not cause harmful interference.
2. This device must accept any interference received, including interference 
that may cause undesired operation.
Caution: Any changes or modifications made to this equipment not 
expressly approved by Honeywell may void the FCC authorization 
to operate this equipment.
Use only shielded data cables with this system. This unit has been tested 
with cables less than 3 meters. Cables greater than 3 meters may not meet 
class B performance.
UL Statement
UL listed: UL60950-1, 2nd Edition.
Canada
Industry Canada
This device complies with Canadian RSS-210.  Operation is subject to the 
following conditions:
1. This device may not cause interference, and
2. This device must accept any interference, including interference that may 
cause undesired operation of this device.
Conformité à la règlementation canadienne
Cet appareil ISM est conforme à la norme CNR-210 du Canada. 
Son fonctionnement est assujetti aux conditions suivantes :
1. Cet appareil ne doit pas causer de brouillage préjudiciable.
2. Cet appareil doit pouvoir accepter tout brouillage reçu, y compris le 
brouillage pouvant causer un fonctionnement indésirable. 
						

							c-UL Statement
C-UL listed: CSA C22.2 No.60950-1-03, 2nd Edition for I.T.E. product safety.
Europe
The CE marking on the product indicates that this device is in 
conformity with all essential requirements of the 1999/5/EC R&TTE 
Directive.  In addition, complies to 2006/95/EC Low Voltage Directive, 
when shipped with recommended power supply.
For CE-related inquiries, please contact:
Honeywell Imaging & Mobility Europe BV
International Inc.
Nijverheidsweg 9-13
5627 BT Eindhoven
The Netherlands
Honeywell shall not be liable for use of our product with equipment (i.e., 
power supplies, personal computers, etc.) that is not CE marked and does 
not comply with the Low Voltage Directive.  This equipment is intended for 
use throughout the European Community and has been assessed to the 
following standards:
EN 300 328
EN 301 489-1 
EN 301 489-17 
EN 60950-1
Waste Electrical and Electronic Equipment 
Information
Honeywell complies with Directive 2002/96/EC OF THE EUROPEAN 
PARLIAMENT AND OF THE COUNCIL on waste electrical and electronic 
equipment (WEEE).
This product has required the extraction and use of natural resources for its 
production. It may contain hazardous substances that could impact health 
and the environment, if not properly disposed.
In order to avoid the dissemination of those substances in our environment 
and to diminish the pressure on the natural resources, we encourage you to 
use the appropriate take-back systems for product disposal. Those systems 
will reuse or recycle most of the materials of the product you are disposing in 
a sound way.
The crossed out wheeled bin symbol informs you that the product 
should not be disposed of along with municipal waste and invites you to use 
the appropriate separate take-back systems for product disposal. 
						

							If you need more information on the collection, reuse, and recycling systems, 
please contact your local or regional waste administration.
You may also contact your supplier for more information on the 
environmental performances of this product.
Germany
If your product is marked with the GS symbol, then the product has 
been issued a GS certificate showing compliance to EN 60950-1, 
Second Edition.
This device is not intended for use in direct field of view at visual 
display workplaces. To avoid distracting reflections at visual display workplaces, 
this device should not be placed in direct field of view.
Australia/NZ
C-Tick Statement
Conforms to AS/NZS 3548 EMC requirement.
Korea
If the following label is attached to your product, the product meets Korean 
agency approval:
이 기기는 가정용(B급) 전자파적합기기로서 주로 가정에서 사용하는 것
을 목적으로 하며 , 
모든 지역에서 사용할 수 있습니다 . 
This product is EMC B grade equipment, intended for residential use.  
This equipment can be used in any area. 
						

							Brazil (3820i, 2020-5 Scanner and AP-010BT)
This product is approved by Anatel, according to the procedures regulated 
by Resolution No. 242/2000 and meets the technical requirements applied.
Este produto está homologado pela ANATEL, de acordo com os 
procedimentos regulamentados pela Resolução No. 242/2000 e atende aos 
requisitos técnicos aplicados.
Para maiores informações, consulte o site da ANATEL – www.anatel.gov.br
 
Japan
Complies with Technical Regulations Conformity Certification of 
Specified Radio equipment.
Mexico
Applicable if NOM logo is marked on product.  Conforms 
to NOM-019.
Comision Federal de Telecomunicaciones (radio aprobación)
International
Safety Precautions for Lithium Batteries
 Do not place batteries in fire or heat the batteries.
 Do not store batteries near fire or other high temperature locations.
 Do not store or carry batteries together with metal objects.
 Do not expose batteries to water or allow the batteries to get wet.
 Do not connect (short) the positive and negative terminals, of the 
batteries, to each other with any metal object.
 Do not pierce, strike or step on batteries or subject batteries to strong 
impacts or shocks.
Modelo: 2020-5
1881-11-7084
(01)07898927490119 Este equipamento opera em caráter secundário, isto é, não tem 
direito a proteção contra interferência prejudicial, mesmo de estações 
do mesmo tipo, e não pode causar interferência a sistemas operando 
em caráter primário.
Modelo: 3820i
1880-11-7084
(01)07898927490102 Este equipamento opera em caráter secundário, isto é, não tem 
direito a proteção contra interferência prejudicial, mesmo de estações 
do mesmo tipo, e não pode causar interferência a sistemas operando 
em caráter primário.
Modelo: AP-010BT
0921-11-6583
(01)07898927490089 Este equipamento opera em caráter secundário, isto é, não tem 
direito a proteção contra interferência prejudicial, mesmo de estações 
do mesmo tipo, e não pode causar interferência a sistemas operando 
em caráter primário. 
						

							 Do not disassemble or modify batteries.     
Caution:  
Danger of explosion if batteries are incorrectly replaced.  Replace only 
with the same or equivalent type recommended by the manufacturer.  
Dispose of used batteries according to the recycle program for batteries 
as directed by the governing agency for the country where the batteries 
are to be discarded.
LED Safety Statement
Scanner LEDs have been tested and classified as “EXEMPT RISK GROUP” 
to the standard: IEC 62471:2006.
Radio Technology
Class II
CB Scheme
Certified to CB Scheme IEC 60950-1, Second Edition.
Solids and Water Protection
The 3820 has a rating of IP41, immunity of foreign particles and dripping 
water. 
The 3820i has a rating of IP54, immunity of foreign particles and sprayed 
water.
Patents
For patent information, please refer to www.honeywellaidc.com/patents.
Warning
To reduce the possibility of heat-related injuries, avoid touching 
sections of the scanner that feel warm.
!
! 
						

							Required Safety Labels
Scanner
Compliance 
Label locations
Item Number, 
Serial Number 
and Revision 
Information 
location 
						

							Base
Compliance 
Label locations
Item Number, 
Serial Number 
and Revision 
Information 
location