Honeywell 8 Channel Dvr Manual

HREP Color Digital Video Recorder User Guide
Document 800-06847 Rev B51
08/10
4. Select the firmware from the firmware list, then click UPGRADE.
The firmware upgrade begins. 
Configuring for Controlling DVRs
You can configure your system to control up to 254 DVRs from the same keyboard. 
1. Click CONTROL DEVICE on the left side of the SYSTEM window.
The CONTROL DEVICE menu appears.
Figure 2-42 CONTROL DEVICE Menu
2. Use the   to configure the following settings:
Configuring the Users
Select USER in the...

52 Installation
Figure 2-43 USER Setup Window
By default, the DVR is configured with a user ID of ADMIN, belonging to the ADMIN group 
and with a password of 1234.
You can add up to seven new users (for a total of eight) and edit existing user details.
Modifying User Details
1. Highlight the user with the green cursor, press  .
The Edit window appears.
Figure 2-44 Edit User Window
2. Double-click each of the following fields to configure them: 
USER IDUse the virtual keyboard to edit the user ID (up to...

HREP Color Digital Video Recorder User Guide
Document 800-06847 Rev B53
08/10
3. Click OK to save the settings. 
Adding a New User
1. Click ADD in the USER Setup window. 
The Add window appears. 
Figure 2-45 Add User Window
2. Double-click each of the following fields to configure them: 
3. Click OK to save the settings. 
Configuring User Authority
Click USER AUTHORITY on the left side of the USER window. The USER AUTHORITY 
setup menu opens.GROUPAssign the user to one of three groups: ADMIN, 
MANAGER,...

54 Installation
Figure 2-46 USER AUTHORITY Menu
Select and click   to change the authority for the Manager and Users. Click APPLY after 
selecting each item. 
NoteAny user can be deleted except the default ADMIN user. User authority is 
effective only when the PASSWORD is ON in the System Management 
Settings. See Configuring System Management Settings on page 49.
Configuring User Log Out
1. Click LOG OUT on the left side of the USER window. The LOG OUT menu appears. 
Figure 2-47 LOG OUT Menu
2. Use the...

HREP Color Digital Video Recorder User Guide
Document 800-06847 Rev B55
08/10
Configuring Network IP Settings
Figure 2-48 IP NETWORK Setup Window
Click the IP SETUP menu tab if it isn’t already selected, then configure the following: 
DHCPWhen enabled, the DVR will obtain an IP address 
automatically if it is connected to a DHCP server or router.
IP ADDRESSIf DHCP is not being used, then the IP address can be 
manually set. 
GATEWAYIf DHCP is not being used, then the gateway IP address 
can be manually...

56 Installation
Configuring Network DDNS 
1. Click DDNS on the left side of the NETWORK window.
The DDNS setup menu appears. 
Figure 2-49 DDNS Setup Window
2. Turn ON/OFF the DDNS. When enabled, the DVR can be accessed through a 
Dynamic DNS server. This function is commonly used if your broadband connection 
does not have a static IP address.  RTSP SERVICE 
PORTIf connected, then the router supports UPNP (Universal 
plug and play) function. When you click the AUTO PORT, 
the port forwarding is...

HREP Color Digital Video Recorder User Guide
Document 800-06847 Rev B57
08/10
CautionTo use the DDNS function, you need to set up port forwarding: 
a. Default WEB SERVICE PORT: 8080
b. Default RTSP SERVICE PORT: 554
The default DDNS HOST NAME is your Mac address. You can 
connect in one of two ways:
(Mac address/Host name)
00115ff00213.dvrlink.net
1234.dvrlink.net (You can enter any DDNS Host name.)
Configuring for E-mail Notifications
1. Click E-MAIL on the left side of the NETWORK window.
The E-MAIL...

58 Installation
Configuring Event/Sensor Settings
Select EVENT/SENSOR in the Main system setup window, then click  . The 
EVENT/SENSOR setup window opens.
Figure 2-51 EVENT/SENSOR Setup Window
Configuring for HDD Events
1. Click HDD EVENT on the left side of the EVENT/SENSOR window if it is not already 
selected.
The HDD EVENT setup menu appears. See Figure 2-51.
2. Configure the DVR to monitor the hard drives and detect problems:
Configuring Alarm Input
1. Click ALARM INPUT on the left side of the...

HREP Color Digital Video Recorder User Guide
Document 800-06847 Rev B59
08/10
Figure 2-52 ALARM INPUT Setup Menu
2. Click OPERATION and TYPE to edit those settings to determine the behavior of each 
of the alarm inputs: 
Configuring Alarm Output
1. Click ALARM OUTPUT on the left side of the EVENT/SENSOR window.
The ALARM OUTPUT setup menu appears.
Figure 2-53 ALARM OUTPUT Setup Menu
The settings you choose for Alarm Output determine the behaviors and actions that will 
trigger each of the alarm outputs...

60 Installation
2. Configure the following behavior settings: 
3. Configure the following action settings: 
NoteRemember to select APPLY and click   to save all settings before exiting 
these menus.
Configuring Buzzer Out Settings
1. Click BUZZER OUT on the left side of the EVENT/SENSOR window.
The BUZZER OUT setup menu appears. ALARM OUTChoose to configure a specific alarm output.
OPERATIONEnable/disable the selected alarm output.
MODESelect from TRANSPARENT (the output is active only when the 
trigger...