Honeywell control panel LYNX Touch User Manual

– 11  – 
SYSTEM OVERVIEW
SYSTEM OVERVIEW SYSTEM OVERVIEW
SYSTEM OVERVIEW 
    
Touchscreen Control Definitions 
 
5000-100-051-V0
ARMED READY
1
2
9
765
84
3
  
Note:    The system functions described below are for reference only and require additional key entries to 
activate. 
1.  DISPLAY WINDOW:  Color Liquid Crystal Display (LCD).  Displays system status icons, time, 
system status information, user menus and the virtual keypad.  
2.  READY Indicator (LED):  (GREEN) When lit, indicates system is ready...

– 12  – 
SYSTEM OVERVIEW
SYSTEM OVERVIEW SYSTEM OVERVIEW
SYSTEM OVERVIEW 
    
Touchscreen Controls Definitions 
 
5. OFF  (Disarm) KEY:   Initiates the disarm process and causes a keypad to be displayed on 
the touchscreen. Disarms the burglary portion of the system, silences alarms and audible 
trouble indicators, and clears alarm trouble display after the problem has been corrected. 
6.  AWAY KEY:  Completely arms both perimeter and interior burglary protection for backup 
protection by sensing an...

– 13  – 
SYSTEM OVERVIEW
SYSTEM OVERVIEW SYSTEM OVERVIEW
SYSTEM OVERVIEW 
    
About the Display and Indicators  
Display Definitions  
ICON TEXT  DEFINITION 
 
Ready to 
Arm Displayed along with the the text “
READY TO ARM” when 
system is Disarmed and ready to arm. 
 
 
Armed 
Away  “
Armed Away ” is displayed along the top of the screen. An 
armed away icon along with  “Armed Away ” is displayed after 
the exit delay expires.  
 
Armed Stay “ Armed Stay ” is displayed along the top of the screen. An...

– 14  – 
SYSTEM OVERVIEW
SYSTEM OVERVIEW SYSTEM OVERVIEW
SYSTEM OVERVIEW 
    
About the Display and Indicators 
 
ICON TEXT  DEFINITION 
 
Fire OR  
Fire Alarm 
95 Fire The fire icon is displayed with alternating text 
“Fire ” and  “Fire 
Alarm 95 Fire ”.  “Fire Alarm ” is also displayed in a red band 
along the top of the screen. 
 
Alarm 96 
Medical  The Medical icon isplayed when a medical alarm is activated. 
“
Alarm ” is also displayed in a red band along the top of the 
screen. 
(If programmed for...

– 15  – 
SYSTEM OVERVIEW
SYSTEM OVERVIEW SYSTEM OVERVIEW
SYSTEM OVERVIEW 
    
Navigating Menus  
LCD Display 
LYNX Touch’s Liquid Crystal Display (LCD) touch-screen displays variable icons and text on 
“ screens” . The screen displays status icons and associated text, the current time, system 
status information and menu choices. The system status is displayed in a colored band along 
the top of the screen. The band color is variable and will change between red, yellow and 
green as the system status...

– 16  – 
SYSTEM OVERVIEW
SYSTEM OVERVIEW SYSTEM OVERVIEW
SYSTEM OVERVIEW 
    
Navigating Menus  
Menu Screens 
System Status is displayed at the top of each screen. The time and date are displayed at the 
bottom of the Home Screen. 
Menus  
Unrestricted Menu 
The first page of the Home Screen provides access to an Unrestricted Menu displays the 
system status and eight selection icons or  “buttons ”. 
1.  Zones  –  Provides access to Zone information and options. 
2.  System  –   Provides information...

– 17  – 
SECURING THE PREMISES
SECURING THE PREMISES SECURING THE PREMISES
SECURING THE PREMISES 
    
System Status 
General Information 
Before arming your system, all protected doors, windows, and other protection zones must be 
closed or bypassed (see the BYPASSING PROTECTION  section). 
READY LED:   The green READY indicator on the control will be lit if the system is ready to 
be armed.  If blinking, the system is not ready.  
NOTE:  The phrases shown in brackets are variable, and are announced...

– 18 – 
SECURIN
SECURINSECURIN SECURING THE PREMISES G THE PREMISESG THE PREMISES
G THE PREMISES 
  
 
Arming the System  
Arming in Stay Mode 
Use this mode when you are staying home, but expect someone to use the entrance door 
later.  Close all protected perimeter windows and doors before arming.  The green READY 
indicator on the control should be lit if the system is ready to be armed. When armed in 
STAY mode, the system will sound an alarm if a protected door or window is opened, but you 
may...

– 19  – 
SECURING THE PREMISES
SECURING THE PREMISES SECURING THE PREMISES
SECURING THE PREMISES 
    
Arming the System 
Armed: Stay
More10:18 AM  June 8,  20105000-100-056-V0
Zones
Message System
DisarmPhone
 3.  At the end of the exit delay the system 
will announce 
“Armed Stay ” and 
display the  “Armed Stay ” screen. 
 
 
If an invalid User Code is entered, the system will return to the home screen. 
 
Auto Stay Feature 
If this feature is enabled by installer, the LYNX Touch SIA, when armed AWAY...

– 20  – 
SECURING THE PREMISES
SECURING THE PREMISES SECURING THE PREMISES
SECURING THE PREMISES 
    
Arming the System 
Arming In Away Mode 
Use this mode when no one will be staying on the premises. Close all protected perimeter 
windows and doors before arming. The green READY indicator on the control should be lit if 
the system is ready to be armed. When armed in AWAY mode, the system will sound an 
alarm if a protected door or window is opened, or if any movement is detected inside the 
premises,...