Honeywell control panel LYNXREN User Manual

							– 51 – 
IN THE EVENT OF TELEPHONE OPERATIONAL PROBLEMS 
In the event of telephone operational problems, disconnect the control by removing the plug from the 
RJ31X (CA38A in Canada) telephone wall jack. We recommend that your certified installer 
demonstrate disconnecting the phones on installation of the system. Do not disconnect the phone 
connection inside the control/communicator. Doing so will result in the loss of your phone lines. If the 
regular phone works correctly after the control/communicator has been disconnected from the phone 
lines, the control/communicator has a problem and should be returned for repair. If upon disconnection 
of the control/communicator, there is still a problem on the line, notify the telephone company that they 
have a problem and request prompt repair service. The user may not under any circumstances (in or 
out of warranty) attempt any service or repairs to the system. It must be returned to the factory or an 
authorized service agency for all repairs.  
						

							– 52 – 
SERVICING INFORMATION 
Your local Honeywell dealer is the person best qualified to service your alarm 
system. Arranging some kind of regular service program with him is 
advisable.  
Your local Honeywell dealer is: 
Name:  
Address:  
  
Phone:  
						

							– 53 – 
OWNERS INSURANCE PREMIUM CREDIT REQUEST 
 
This form should be completed and forwarded to your homeowners insurance carrier for possible premium credit. 
 
A. GENERAL INFORMATION: 
Insureds Name and Address:    
   
 
Insurance Company: Policy No.:    
 
ADEMCO LYNXR-EN ______________________________________ Other    
Type of Alarm:         Burglary        Fire        Both 
 
 
Installed by:      Serviced by:   
 Name  Name 
     
 Address  Address 
 
B. NOTIFIES (Insert B = Burglary, F = Fire) 
Local Sounding Device     Police Dept.     Fire Dept.   
 
Central Station        Name:_______________________________________________________________________________  
 Address:   
 
  Phone:    
 
C. POWERED BY:  A.C. With Rechargeable Power Supply 
 
D. TESTING:        Quarterly         Monthly         Weekly        Other  
 
(continued on other side)  
						

							– 54 – 
OWNERS INSURANCE PREMIUM CREDIT REQUEST (cont.) 
 
E. SMOKE DETECTOR LOCATIONS 
      Furnace Room        Kitchen          Bedrooms          Attic  
      Basement            Living Room         Dining Room          Hall  
 
F. BURGLARY DETECTING DEVICE LOCATIONS: 
      Front Door           Basement Door          Rear Door         All Exterior Doors 
       1st Floor Windows         All Windows          Interior Locations 
       All Accessible Openings, Including Skylights, Air Conditioners and Vents 
 
G. ADDITIONAL PERTINENT INFORMATION: 
 
  
  
  
  
  
 
 
 
 
 
 
Signature:         Date:    
  
						

							– 55 – 
 
INDEX 
 
A 
AC ...................................................................12 
Adjusting the volume.....................................25 
Alarm .........................................................5, 12 
Alarm monitoring company...........................19 
Armed indicator .............................................10 
Audible emergency/audible alarm ................19 
Aux function...............................................8, 26 
Aux key function ..............................................4 
Away...............................................................12 
Away mode .......................................5, 7, 14, 15 
 
B 
Babysitter code ..............................................41 
Battery ...........................................................44 
Battery conditions..........................................44 
Battery pack...................................................44 
Begin day .......................................................31 
Begin time ................................................30, 31 
Burglary protection..........................................5 
Bypass ............................................................12 
Bypass a zone.............................................7, 18 
CA message display .......................................16 
CC message display .......................................43 
Central monitoring station..............................6 
Chime .............................................................12 
Chime mode .......................................5, 7, 9, 19 
Clock/calendar..........................................27, 28 
 
D 
Day of week entries .......................................33 
Device activation..............................................3 
Device descriptions ........................................23 
Device number ...............................................31 
Di message display ........................................43 
Disarm..............................................................7 
Disarming the system ...................................17 
Display definitions.........................................12 
Displaying bypassed zones ............................18 
Duress code ....................................................41 
 E 
EA message display ...................................... 16 
Emergency evacuation .................................. 40 
End day ......................................................... 31 
End time ........................................................ 31 
Entry delay................................................ 5, 16 
Event entries ................................................. 32 
Event identifier ............................................. 30 
Exit alarms.................................................... 16 
Exit delay ...................................................... 16 
 
F 
Fault ........................................................ 12, 43 
FC message display ...................................... 43 
Features ...................................................... 3, 4 
Fire ................................................................ 12 
Fire alarm system ......................................... 38 
Fire protection................................................. 5 
Forced bypass ................................................ 18 
Follow Me announcement feature ............. 22 
 
H 
Hardwire ....................................................... 30 
 
I 
Instant ........................................................... 12 
Internal sounder ........................................... 11 
 
L 
Low bat .............................................. 12, 43, 44 
 
M 
Manual paging .............................................. 20 
Master code ................................................... 41 
Master keypad ...................................... 3, 9, 10 
Master user ............................................... 5, 41 
Master user code ........................................... 41 
Memory of alarm........................................... 17 
Message ......................................................... 12 
Message center............................................ 3, 7 
Message playback ......................................... 24 
Microphone
.................................................... 11 
No delay..................................................... 7, 15  
						

							– 56 – 
P 
Pager ..........................................................8, 26 
Pager Code .....................................................20 
Paging feature..................................3, 20, 2, 26 
Panic key ....................................................3, 19 
Personal emergency/aux. alarm ....................19 
Phone access feature................................34, 36 
Phone control ...................................................4 
Play back a message ........................................7 
Powerline carrier device commands .............23 
 
Q 
Quick arm ............................................7, 14, 15 
 
R 
Ready indicator ........................................10, 17 
Ready LED .....................................................18 
Ready light .....................................................13 
Real-time clock.................................................3 
REC ................................................................12 
Rechargeable, nickel-metal hydride battery 
pack ...........................................................44 
Record
.............................................................11 
Record a message.......................................7, 24 
Remote interactive phone capability ............34 
Restart exit delay.......................................7, 14 
RF jam condition............................................43 
 
S 
Schedule number ...........................................30 
Scheduling......................................................29 
Security codes ........................................4, 5, 41 
Security functions ............................................7 
Servicing information ....................................53 
Silence alarm .................................................17 
Silencing a fire alarm ....................................38 
Silencing low battery warning tones ............44 
Silent emergency/silent alarm ......................19 
Smoke detectors ...............................................5 
Speaker ..........................................................11 
Speaker phone feature.............................36, 37 
Status .......................................................13, 45 
Stay ................................................................12 
Stay mode.........................................5, 7, 14, 15 
Stop recording ..................................................7 
Supervised fire alarm ....................................19 
System battery ...............................................44 T 
Test ................................................................ 12 
Test mode .................................................. 8, 42 
Time and date ................................................. 8 
Trouble messages.......................................... 43 
Two-way voice ............................................. 4, 6 
 
U 
User code ................................................... 5, 41 
Using powerline carrier device commands .... 3 
 
V 
Voice announcement ....................................... 3 
Voice dialog ..................................................... 6 
Volume
.......................................................... 11 
Volume adjustment......................................... 7 
Volume level .................................................. 13 
 
W 
Wireless keypads ............................................ 3 
Wireless sensors............................................ 44 
 
Z 
Zone number ................................................. 30 
Zones................................................................ 5 
  
						

							– 57 – 
WARNING!   
THE LIMITATIONS OF THIS ALARM SYSTEM 
While this system is an advanced design security system, it does not offer guaranteed protection against burglary or fire or other emergency. Any alarm system, whether commercial or residential, is subject to compromise or failure to warn for a variety of reasons. For example: 
  Intruders may gain access through unprotected openings or have the technical sophistication to bypass an alarm sensor or disconnect an alarm warning device. 
  Intrusion detectors (e.g. passive infrared detectors), smoke detectors, and many other sensing devices will not work without power. Battery operated devices will not work without batteries, with dead batteries, or if the batteries are not put in properly. Devices powered solely by AC will not work if their AC power supply is cut off for any reason, however briefly. 
  Signals sent by wireless transmitters may be blocked or reflected by metal before they reach the alarm receiver. Even if the signal path has been recently checked during a weekly test, blockage can occur if a metal object is moved into the path. 
  A user may not be able to reach a panic or emergency button quickly enough. 
  While smoke detectors have played a key role in reducing residential fire deaths in the United States, they may not activate or provide early warning for a variety of reasons in as many as 35% of all fires, according to data published by the Federal Emergency Management Agency. Some of the reasons smoke detectors used in conjunction with this System may not work are as follows. Smoke detectors may have been improperly installed and positioned. Smoke detectors may not sense fires that start where smoke cannot reach the detectors, such as in chimneys, in walls, or roofs, or on the other side of closed doors. Smoke detectors also may not sense a fire on another level of a residence or building. A second floor detector, for example, may not sense a first floor or basement fire. Moreover, smoke detectors have sensing limitations. No smoke detector can sense every kind of fire every time. In general, detectors may not always warn about fires caused by carelessness and safety hazards like smoking in bed, violent explosions, escaping gas, improper storage of flammable materials, overloaded electrical circuits, children playing with matches, or arson. Depending upon the nature of the fire and/or the locations of the smoke detectors, the detector, even if it operates as anticipated, may not provide sufficient warning to allow all occupants to escape in time to prevent injury or death. 
  Passive Infrared Motion Detectors can only detect intrusion within the designed ranges as diagrammed in their installation manual. Passive Infrared Detectors do not provide volumetric area protection. They do create multiple beams of protection, and intrusion can only be detected in unobstructed areas covered by those beams. They cannot detect motion or intrusion that takes place behind walls, ceilings, floors, closed doors, glass partitions, glass doors, or windows. Mechanical tampering, masking, painting or spraying of any material on the mirrors, windows or any part of the optical system can reduce their detection ability. Passive Infrared Detectors sense changes in temperature; however, as the ambient temperature of protected area approaches the temperature range of 90° to 105°F, the detection performance can decrease.   Alarm warning devices such as sirens, bells or horns may not alert people or wake up sleepers if they are located on the other side of closed or partly open doors. If warning devices sound on a different level of the residence from the bedrooms, then they are less likely to waken or alert people inside the bedrooms. Even persons who are awake may not hear the warning if the alarm is muffled from a stereo, radio, air conditioner or other appliance, or by passing traffic. Finally, alarm warning devices, however loud, may not warn hearing-impaired people or waken deep sleepers. 
  Telephone lines needed to transmit alarm signals from a premises to a central monitoring station may be out of service or temporarily out of service. Telephone lines are also subject to compromise by sophisticated intruders. 
  Even if the system responds to the emergency as intended, however, occupants may have insufficient time to protect themselves from the emergency situation. In the case of a monitored alarm system, authorities may not respond appropriately. 
  This equipment, like other electrical devices, is subject to component failure. Even though this equipment is designed to last as long as 10 years, the electronic components could fail at any time. 
The most common cause of an alarm system not functioning when an intrusion or fire occurs is inadequate maintenance. This alarm system should be tested weekly to make sure all sensors and transmitters are working properly. Installing an alarm system may make one eligible for lower insurance rates, but an alarm system is not a substitute for insurance. Homeowners, property owners and renters should continue to act prudently in protecting themselves and continue to insure their lives and property. 
We continue to develop new and improved protection devices. Users of alarm systems owe it to themselves and their loved ones to learn about these developments. 
   
						

							– 58 – 
 
ONE YEAR LIMITED WARRANTY 
Honeywell International Inc., acting through its Security & Custom Electronics business (Seller), 165 
Eileen Way, Syosset, New York 11791, warrants its security equipment (the product) to be free from 
defects in materials and workmanship for one year from date of original purchase, under normal use 
and service. Sellers obligation is limited to repairing or replacing, at its option, free of charge for parts, 
labor, or transportation, any product proven to be defective in materials or workmanship under normal 
use and service. Seller shall have no obligation under this warranty or otherwise if the product is 
altered or improperly repaired or serviced by anyone other than the Seller. In case of defect, contact the 
security professional who installed and maintains your security equipment or the Seller for product 
repair. 
This one year Limited Warranty is in lieu of all other express warranties, obligations or liabilities. 
THERE ARE NO EXPRESS WARRANTIES, WHICH EXTEND BEYOND THE FACE HEREOF. ANY 
IMPLIED WARRANTIES, OBLIGATIONS OR LIABILITIES MADE BY SELLER IN CONNECTION 
WITH THIS PRODUCT, INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY, OR 
FITNESS FOR A PARTICULAR PURPOSE OR OTHERWISE, ARE LIMITED IN DURATION TO A 
PERIOD OF ONE YEAR FROM THE DATE OF ORIGINAL PURCHASE. ANY ACTION FOR 
BREACH OF ANY WARRANTY, INCLUDING BUT NOT LIMITED TO ANY IMPLIED WARRANTY 
OF MERCHANTABILITY, MUST BE BROUGHT WITHIN 12 MONTHS FROM DATE OF ORIGINAL 
PURCHASE. IN NO CASE SHALL SELLER BE LIABLE TO ANYONE FOR ANY CONSEQUENTIAL 
OR INCIDENTAL DAMAGES FOR BREACH OF THIS OR ANY OTHER WARRANTY, EXPRESS OR 
IMPLIED, OR UPON ANY OTHER BASIS OF LIABILITY WHATSOEVER, EVEN IF THE LOSS OR 
DAMAGE IS CAUSED BY THE SELLERS OWN NEGLIGENCE OR FAULT. Some states do not allow 
limitation on how long an implied warranty lasts or the exclusion or limitation of incidental or 
consequential damages, so the above limitation or exclusion may not apply to you. 
Seller does not represent that the product may not be compromised or circumvented; that the product 
will prevent any personal injury or property loss by burglary, robbery, fire or otherwise; or that the 
product will in all cases provide adequate warning or protection. Buyer understands that a properly 
installed and maintained alarm may only reduce the risk of a burglary, robbery, fire or other events 
occurring without providing an alarm, but it is not insurance or a guarantee that such will not occur or 
that there will be no personal injury or property loss as a result. CONSEQUENTLY, SELLER SHALL 
HAVE NO LIABILITY FOR ANY PERSONAL INJURY, PROPERTY DAMAGE OR OTHER LOSS 
BASED ON A CLAIM THE PRODUCT FAILED TO GIVE WARNING. HOWEVER, IF SELLER IS 
HELD LIABLE, WHETHER DIRECTLY OR INDIRECTLY, FOR ANY LOSS OR DAMAGE ARISING 
UNDER THIS LIMITED WARRANTY OR OTHERWISE, REGARDLESS OF CAUSE OR ORIGIN, 
SELLERS MAXIMUM LIABILITY SHALL NOT IN ANY CASE EXCEED THE PURCHASE PRICE 
OF THE PRODUCT, WHICH SHALL BE THE COMPLETE AND EXCLUSIVE REMEDY AGAINST 
SELLER. This warranty gives you specific legal rights, and you may also have other rights, which vary 
from state to state. No increase or alteration, written or verbal, to this warranty is authorized. 
  
						

							– 59 – 
NOTES  
						

							– 60 – 
NOTES