Honeywell control panel VISTA32FBPT User Manual
Have a look at the manual Honeywell control panel VISTA32FBPT User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 178 Honeywell manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
800-11045 2/12 Rev. C
VISTA-32FBPT
Commercial Fire and Burglary
Commercial Fire and Burglary Commercial Fire and Burglary
Commercial Fire and Burglary
Partitioned Security Systems
Partitioned Security Systems Partitioned Security Systems
Partitioned Security Systems
with Scheduling
with Scheduling with Scheduling
with Scheduling
User Guide
User Guide User Guide
User Guide
– 3 – TABLE OF CONTENTS SYSTEM OVERVIEW ............................ 5 General ...................................................... 5 A Partitioned System .............................. ... 5 Zones ......................................................... 6 Fire Protection ................................... ......... 6 Burglary Protection ............................... ..... 6 Carbon Monoxide Protection ..................... 7 Alarms ........................................................ 7 Memory of Alarm ................................... ..... 7 Using Schedules ........................................ 7 Device Timers ............................................ 8 To Access another Partition (GOTO Command) ................................................. 8 Master Keypad Operation .......................... 8 Self-Help Feature ....................................... 9 ABOUT THE KEYPADS ....................... 10 General .................................................... 10 The Alpha Keypad .................................. . 10 FUNCTIONS OF THE KEYPAD ........... 11 ENTRY/EXIT DELAYS ......................... 15 General Information ................................. 15 SECURITY CODES AND AUTHORITY LEVELS ....................... 16 General Information ............................... .. 16 Duress Code ............................................ 16 Quick Arming............................................ 16 Authority Levels ....................................... 17 General Rules on Authority Levels and Changes ................................................... 18 To Exit User Edit Mode ............................ 18 To Add a User .......................................... 19 To Change a Users Code ....................... 21 To Delete a User .................................. .... 22 ACCESSING OTHER PARTITIONS .... 23 To Access another Partition ..................... 2 3 Global Arming .......................................... 23 Master Keypad Operation ........................ 24 Common Lobby Operation ....................... 26 How User Codes Affect the Common Lobby ....................................................... 27 CHECKING FOR OPEN ZONES .......... 28 Using the READY Key ................ 28 DISPLAYING ALL ZONE DESCRIPTORS ................................ 29 Using the READY Key ..................... 29 BYPASSING PROTECTION ZONES ... 30 Using the 6 BYPASS Key ................... 30 Quick Bypass ...................................... ..... 30 Displaying Bypassed Zones .................... 31 Group Bypass ...................................... .... 31 Zones Remaining Bypassed After Disarming ................................................. 32 ARMING PERIMETER ONLY ............... 33 Using the 3 STAY key ......................... 33 Auto-STAY Arming .................................. . 34 ARMING PERIMETER ONLY ............... 35 Using the 7 INSTANT Key .................. 35 ARMING ALL PROTECTION ................ 36 Using the 2 AWAY Key ....................... 36 ARMING ALL PROTECTION ................ 37 Using the 4 MAXIMUM Key ................ 37 QUICK EXIT ........................................ . 38 Using the # + 9 Keys ...................... 38 DISARMING AND SILENCING ALARMS ........................................... 39 Using the 1 OFF Key .......................... 39 Memory of Alarm ...................................... 39 USING THE KEYSWITCH .................... 40 General .................................................... 40 Arming ...................................................... 40 Disarming ......................................... ........ 40 CHIME MODE ...................................... 4 1 Using the 9 Key ................................... 41
– 4 – VIEWING ALARM COMPANY MESSAGES ..................................... 42 General Information ............................... ... 42 PANIC KEYS ....................................... 43 Using Panic Keys ...................................... 43 RELAY CONTROL ............................... 44 General Information ............................... ... 44 Executing .................................................. 44 USING #70 RELAY MENU MODE ....... 45 General Information ............................... ... 45 USING SCHEDULES ........................... 46 Delaying the Closing Time ........................ 46 Temporary Open/Close Schedules .......... 46 Programming Temporary Schedules ........ 47 PROGRAMMING DEVICE TIMERS ..... 49 General Information .................................. 49 Randomize Output Device Times ............. 51 USING #77 INSTANT ACTIVATION MODE .............................................. . 52 EVENT LOG PROCEDURES .............. 55 General Information .................................. 55 To Display The Event Log ........................ 5 5 TESTING THE SYSTEM (TO BE CONDUCTED WEEKLY) .................. 57 Using the 5 TEST Key ......................... 57 Testing Your System ............................... . 57 FIRE ALARM SYSTEM ........................ 58 In Case Of Fire Alarm ............................... 58 Silencing a Fire Alarm............................... 58 Event Display Lock ................................... 59 Fire Drill Test (Code + # + 69) .................. 59 TROUBLE CONDITIONS ..................... 60 Typical Trouble Displays .......................... 60 Power Failure ............................................ 61 EMERGENCY EVACUATION .............. 62 MAINTAINING YOUR SYSTEM ........... 63 Taking Care of Your System .................... 63 Replacing Batteries in Wireless Sensors ..................................................... 63 Silencing Low Battery W arning Tones at the Keypad ..................................... ....... 64 Routine Care ............................................. 64 QUICK GUIDE TO FIRE SYSTEM FUNCTIONS ..................................... 65 QUICK GUIDE TO BURGLARY SYSTEM FUNCTIONS ...................... 66 SUMMARY OF AUDIBLE NOTIFICATION ................................. 68 INDEX ............................................. ..... 73
– 5 –
System Overview
General
Congratulations on your ownership of a Honeywell partitioned Security
System. Youve made a wise decision in choosing it, for it represents the
latest in security protection technology today. Hon eywell is the worlds
largest manufacturer of security systems and millio ns of premises are
protected by Honeywell systems.
This system offers you three forms of protection: b urglary, fire and
emergency. To realize the systems full potential, it is important that you feel
comfortable in operating it. Your system consists o f at least one Keypad
which provides full control of system operation, va rious sensors which
provide perimeter and interior burglary protection, plus a selected number of
strategically placed smoke or combustion detectors designed to provide early
warning in case of fire.
The system uses microcomputer technology to monitor all protection zones
and system status and provides appropriate informat ion for display on the
Keypad(s) used with the system, and initiates appro priate alarms. Your
system may also have been programmed to automatical ly transmit alarm or
status messages over the phone lines to a central a larm monitoring station.
A Partitioned System
Simply stated, a partitioned system shares one phys ical alarm system among
different users, each with their own requirements. For the most part, you as
a user need not know about other users and their st ructure in the system,
but from time to time, you may see display messages that indicate the system
is in use by another user. Do not be concerned as t his is normal. Refer to the
ACCESSING OTHER PARTITIONS section for additional i nformation.
– 6 – System Overview (cont’d) Zones Your systems sensing devices have been assigned to various zones. For example, the sensing device on your Entry/Exit door may have been assigned to zone 001, sensing devices on windows in the mast er bedroom to zone 002, and so on. These numbers will appear on the display , along with an alpha descriptor for that zone (if programmed), when an a larm or trouble condition occurs. Fire Protection The fire protection portion of your security system (if used) is always on and will sound an alarm if a fire condition is detected . Refer to the Fire Alarm System section for important information concerning fire protection, smoke detectors and planning emergency exit routes from y our facility. Burglary Protection The burglary protection portion of your system must be turned on or armed before it will sense burglary alarm conditions. Your system p rovides four modes of burglary protection: STAY, AWAY, INSTANT and MAXIMUM, and even allows you to BYPASS selected zones of protection while leaving th e rest of the system armed. The system also provides a CHIME mode, for alerting use rs to the opening and closing of doors and windows while the system is disarmed. Ref er to the other sections of this manual for procedures for using these features. The following table lists the four different arming modes and the results of each. Features For Each Arming Mode Arming Mode Exit Delay Entry Delay Perimeter Armed AW AY Yes Yes Yes STAY* Yes Yes Yes INSTANT* Yes No Yes MAXIMUM Yes No Yes *The system provides three different STAY and INSTANT arming modes. See ARMING IN THE STAY MODES and ARMING IN THE INSTANT MODES sections for details on these modes.
– 7 – System Overview (cont’d) Carbon Monoxide Protection Carbon monoxide (CO) protection is available with your system using the 5800CO Carbon Monoxide Detector. The 5800CO is a 3 V battery powered wireless Carbon Monoxide Detector used with wireles s alarm systems that support 5800 series devices. Carbon monoxide gas i s a highly poisonous gas which is released when fuels are burned. It is invi sible, has no smell and is therefore impossible to detect with the human sense s. We strongly suggest installing Carbon monoxide protection with your sys tem. Alarms When an alarm occurs, both the keypad and external sounders will sound, and the keypad will display the zone(s) causing the alarm. If your system is connected to a central monitoring station, an alarm message will also be sent. To stop the alarm sounding, simply disarm the syste m. Memory of Alarm When an alarm condition occurs, the keypad displays the number(s) of the zone(s) that caused the problem, and displays the t ype of alarm (ex. FIRE, ALARM). It remains displayed until it is cleared by disarming the system (see Disarming the System section). Using Schedules Your system may have been programmed with schedules for automatically arming, disarming and activating various devices an d/or performing other system functions at predetermined times. Users can modify some of these schedules by manually delaying a closing time, usin g temporary schedules, or by programming special user schedules. Refer to the Using Schedules section at the end of this manual for scheduling related pr ocedures.
– 8 –
System Overview (cont’d)
Device Timers
The system provides up to 20 timers that can be used to control various
devices, such as lights or appliances. These timers are similar in concept to
the individual appliance timers that might be purch ased at a department
store. The devices that can be controlled are progr ammed into the system by
the installer. Up to 96 of these devices can be pro grammed. Refer to the
Programming Device Timers section for procedures.
To Access another Partition (GOTO Command)
Each keypad is assigned a default partition for dis play purposes, and will
show only that partitions information. But, if the user is authorized, a
keypad in one partition can be used to perform syst em functions in another
partition, by using the GOTO command. Note that onl y those partitions
authorized and programmed by the installer can be a ccessed in this manner.
To GOTO another partition, enter your security code , then press [ ] followed
by the desired partition number (1-2).
The keypad will remain in the new partition until d irected to go to another
partition, or until 2 minutes has elapsed with no k eypad activity. Entering
your security code, pressing [
] followed by [0] will return the keypad to its
original partition.
Master Keypad Operation
A Master keypad is one on which the status of all eight partitions is
displayed simultaneously. A user can get more info rmation about a certain
partition by simply entering [
] + the desired partition number (1-2). To log
on to the Master partition (3) using the GOTO command, and to perform
any functions at a Master keypad, a user must have access to all partitions.
– 9 –
System Overview (cont’d)
Self-Help Feature
Abbreviated user instructions are built into the system that can be easily
viewed on the alpha keypads message display screen . This feature will prove
particularly useful if this manual is not convenien tly accessible when you
need to perform a system procedure with which you a re not familiar.
To view the abbreviated instructions:
Simply press and hold down the function key of inte rest until the description
starts to appear (about 5 seconds) and then release it. The system must be
“READY TO ARM” to perform this function.
Refer to the Functions of the Keypad section for descriptions of each key
function.
– 10 – About The Keypads General IMPORTANT: If the keypad beeps rapidly upon entering the premises, it indicates that an alarm has occurred d uring your absence. LEAVE the premises IMMEDIATELY and CONTACT THE POLICE from a safe location nearby. Your keypads allow you to control all system functions. The keypads feature a telephone style (digital) keypad and a Liquid Cry stal Display (LCD) that shows the nature and location of all occurrences. K eypad display back lighting is programmable to always stay on or to li ght only when a key is pressed, then turn off a few minutes later. The keypads also feature a built-in sounder that wi ll sound during alarms and troubles. It will also beep during certain sy stem functions, such as during entry/exit delay times, during CHIME mode, a nd when depressing keys to perform system functions (to acknowledge th e key press). These sounds can be optionally suppressed in some of your keypads (so as not to disturb other users of the system). Ask your instal ler if this has been done. The Alpha Keypad Alpha keypads feature a 2-line, 32-character alphan umeric LCD that can display system messages in user-friendly English. A bbreviated user instructions can also be displayed (see Self Help p aragraph in the SYSTEM OVERVIEW section). These keypads can also be progra mmed with custom zone descriptors. NOTE : There may be multiple keypads on your system. On e, the primary keypad, will continue to operate under faulted cond itions.