Honeywell control panel VISTA32FBPT User Manual
Have a look at the manual Honeywell control panel VISTA32FBPT User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 178 Honeywell manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
– 31 –
Bypassing Protection Zones (cont’d)
2. BYPASS 007 FRONT
UPSTAIRS BEDROOM
Typical bypass message In a few moments, all open zones will be displayed
along with the word BYPASS. Wait for these zones
to be displayed before arming. Arming the system
before bypassed zones are displayed eliminates all
bypasses.
3. DISARMED BYPASS
READY TO ARM
Arm the system as usual when the keypad displays
the ready to arm message. Bypassed zones are
unprotected and will not cause an alarm when
violated while your system is armed.
Displaying Bypassed Zones
The system allows you to view bypassed zones that ar e presently bypassed regardless
of the status of the partition (armed, disarmed, et c.). To view bypassed zones.
1. Enter your security code + # + 84.
2. All zones presently bypassed are automatically sc rolled for display.
Group Bypass
Your system allows you to easily bypass a group of zones without having to enter zone
numbers individually. The system provides up to 15 groups. There is no limit to the
number of zones that may be assigned to any one gro up. Check with your installer for
a list of zones assigned to the group(s).
NOTES:
All bypasses are removed when an OFF sequence (secu rity code plus OFF) is
performed.
Users must be assigned the following attributes to p erform the group bypass function:
Enabled for group bypassing
Access to the partition(s) containing the zones bein g bypassed
Global arming capability.
To use the Group Bypass feature:
BYPASS
1. Enter your security code and press 6 then press then enter the
group number (01-15).
– 32 –
Bypassing Protection Zones (cont’d)
2. BYPASS 007 FRONT
UPSTAIRS BEDROOM
Typical bypass message In a few moments, all the zones in the group will be
displayed along with the word BYPASS. Wait for
these zones to be displayed before arming. Arming
the system before bypassed zones are displayed
eliminates all bypasses.
3. DISARMED BYPASS
READY TO ARM
Arm the system as usual when the keypad displays
the ready to arm message. Bypassed zones are
unprotected and will not cause an alarm when
violated while your system is armed.
Zones Remaining Bypassed After Disarming
The system provides an option to allow all manually bypassed zones to remain
bypassed upon disarming (security code + OFF) of th e partition. This option must be
programmed by your installer. Check with your inst aller to see if this option has been
enabled.
NOTES:
For each partition in which the option is enabled, the security code + OFF will no
longer unbypass zones. To unbypass ALL zones you mus t enter your security code + #
+ 64. To unbypass zones INDIVIDUALLY, you must ente r your security code + 6 +
zone number.
Any zone that was automatically bypassed by the syst em will be unbypassed upon
disarming the system (e.g. STAY mode, Auto-STAY, et c.).
Vent zones and zones bypassed by a programmed Auto-B ypass schedule (Tme Driven
Event) are considered “manual bypasses” and will no t be unbypassed upon disarming
the system.
Zones that were in a bypassed state at the time a S ystem Shutdown is sent from the
Compass Downloading software will be unbypassed whe n the System Shutdown is
removed.
– 33 – Arming Perimeter Only (With Entry Delay ON) Using the 3 STAY key Use this key when you are staying home, but might e xpect someone to use the entrance door later. When armed in STAY mode, the system will sound an a larm if a protected door or window is opened, but you may otherwise mov e freely throughout the premises. Late arrivals can enter through the entra nce door without causing an alarm, but they must disarm the system within th e entry delay period or an alarm will occur. The system provides three STAY modes. STAY mode 1, 2, and 3. When activated, STAY modes 1 and 2 automatically bypass specific zones assigned by your installer to each of the STAY modes. STAY m ode 3, when activated, automatically bypasses all zones assigned to STAY m odes 1 AND 2. Check with your installer for a list of the zones that ar e bypassed during each STAY mode. Close all perimeter windows and doors before arming (se e CHECKING FOR OPEN ZONES section) STAY 1. Enter your security code and press 3 + 1 for STAY Mode 1. Enter your security code and press 3 + 2 for STAY Mode 2. Enter your security code and press 3 + 3 for STAY Mode 3. NOTE: If none of the zones in a partition are assigned to Stay mode 2, then when the user enters [User Code] + [3] (STAY), all zones assigned to Stay mode 1 are automatically bypassed. 2. ARMED ***STAY 1* ZONE BYPASSED The keypad beeps three times, displays the armed message, and indicates which STAY mode (1, 2 or 3). NOTE: ZONE BYPASSED in this display simply indicates that some zones of protection are not armed when using STAY mode.
– 34 –
Arming Perimeter Only
(With Entry Delay ON) (cont’d)
Auto-STAY Arming
Auto-stay allows the system to automatically bypass certain zones if upon
arming none of the entry/exit zones are faulted dur ing the exit delay time (no
one exits the premises). The system provides an opt ion to set each burglary
zone for Auto-stay. All zones enabled for auto-stay except for perimeter and
day/night types of zones, has exit delay time when the partition is armed.
Check with your installer for the zones assigned fo r Auto-STAY.
NOTES:
Auto-STAY applies to all four arming modes (AWAY, S TAY, INSTANT
and MAXIMUM).
Arming the partition AWAY via an RF transmitter ove rrides the Auto-
stay feature (partition will not bypass zones progr ammed for auto-stay).
– 35 – Arming Perimeter Only (With Entry Delay OFF) Using the 7 INSTANT Key Use this key when you are staying home and do not e xpect anyone to use the entrance door. When armed in INSTANT mode, the system will sound a n alarm if a protected door or window is opened, but you may oth erwise move freely throughout the premises. The alarm will also sound immediately if anyone opens the entrance door. The system provides three INSTANT modes: INSTANT mo de 1, 2, and 3. INSTANT modes 1 and 2, when activated, automaticall y bypass specific zones assigned by your installer to each of the INS TANT modes. INSTANT mode 3, when activated, automatically bypasses all zones assigned to INSTANT modes 1 and 2. Check with your installer fo r a list of the zones that are bypassed during each INSTANT mode. Close all perimeter windows and doors before arming (se e CHECKING FOR OPEN ZONES section) INSTANT 1. Enter your security code and press 7 + 1 for INSTANT Code 1. Enter your security code and press 7 + 2 for INSTANT Code 2. Enter your security code and press 7 + 3 for INSTANT Code 3. NOTE: If none of the zones in a partition are assigned to INSTANT mode 2, then when the user enters [User Code] + [7] (INSTANT), all zones assigned to INSTANT mode 1 are automatically bypassed. 2. ARMED *INSTANT1 ZONE BYPASSED The keypad beeps three times, displays the armed message and indicates which INSTANT mode (1, 2, or 3). NOTE: ZONE BYPASSED in this display simply indicates that some zones of protection are not armed when using RSTART mode.
– 36 –
Arming All Protection
(With Entry Delay ON)
Using the 2 AWAY Key
Use this key when no one will be staying on the pre mises.
When armed in AWAY mode, the system will sound an a larm if a protected
door or window is opened, or if any movement is det ected inside the premises.
You may leave through the entrance door during the exit delay period
without causing an alarm. You may also reenter thro ugh the entrance door,
but must disarm the system within the entry delay p eriod or an alarm will
occur.
Close all perimeter windows and doors before arming (se e
CHECKING FOR OPEN ZONES section)
AWAY
1. Enter your security code and press 2 .
2
. ARMED **AW AY**
YOU MAY EXIT NOW
The keypad will beep twice and will display the
armed message.
NOTE: The YOU MAY EXIT NOW portion of
the message disappears when exit delay
expires.
– 37 –
Arming all Protection
(with Entry Delay OFF)
Using the 4 MAXIMUM Key
Use this key when the premises will be vacant for e xtended periods of time
such as vacations, etc., or when no one will be mov ing through protected
interior areas.
When armed in MAXIMUM mode, the system will sound a n alarm if a
protected door or window is opened, or if any movem ent is detected inside the
premises. You may leave through the entrance door d uring the exit delay
period without causing an alarm, but an alarm will be sounded as soon as
someone reenters.
Close all perimeter windows and doors before arming (see Checking
for Open Zones section).
MAXIMUM
1. Enter your security code and press 4 .
2. ARMED *MAXIMUM*
YOU MAY EXIT NOW
The keypad will beep twice and will display the
armed message.
NOTE: The YOU MAY EXIT NOW portion of
the message disappears when exit delay
expires.
– 38 –
Quick Exit
Using the # + 9 Keys
The Quick Exit feature allows you to exit the armed partition without having
to disarm and then rearm the partition.
To Quick Exit the premises:
1. Press the #
key and then press the 9 key.
2. The system will sound the exit beeps, if enabled, a nd will give you the
programmed exit delay time to leave the premises.
– 39 –
Disarming and Silencing Alarms
Using the 1 OFF Key
The OFF key is used to disarm the system and to silence ala rm and trouble
sounds. See Summary of Audible Notification section for information that
will help you to distinguish between FIRE and BURGL ARY alarm sounds.
IMPORTANT: If you return and the main burglary sounder is on, DO NOT enter
the premises, but call the police from a nearby safe location. If you return after an
alarm has occurred and the main sounder has shut it self off, the keypad will beep
rapidly upon entering, indicating that an alarm has occurred during your absence.
LEAVE the premises IMMEDIATELY and CONTACT THE POLI CE from a
nearby safe location.
To disarm the system and silence burglary or fire alarms:
OFF
1. Enter your security code and press 1 .
DISARMED
READY TO ARM
2. The Ready message will be displayed (if no alarm s have occurred while
armed) and the keypad will beep once to confirm tha t the system is
disarmed.
Memory of Alarm
The keypad displays the zone number and type of ala rm for any zone that
has an alarm condition. These messages will remain displayed until cleared
by a user. If an alarm has occurred, note the zone number displayed on the
keypad and repeat step 1 above to clear the Memory of Alarm and restore
the Ready message display. If the Ready message wil l not display, go to the
displayed zone and remedy the fault (close windows, etc.). If the fault cannot
be remedied, notify the alarm agency.
If the system was armed when the alarm occurred, re peat step 1 twice: once
to disarm the system, a second time to clear the di splay.
– 40 – Using the Keyswitch General Your system may be equipped with a keyswitch for use when arming and disarming a partition. A red and green light on the keyswitch plate indicate the status of your system as follows: Green Light: Lights when the system is disarmed and ready to be armed (no open zones). If the system is disarmed an d the green light is off, it indicates the system is not ready (one or more zones are open). Red Light: Lights when system is armed or memory of alarm exi sts. Lit Steady: Partition is armed in AWAY mode. Slow Flashing: Partition is armed in STAY mode. Rapid Flashing: Memory of alarm, indicating an alarm has occurred. Arming To arm in the AWAY mode, turn the key to the right for 1 second and release. Keypads will beep twice and the red light will stay on steady. To arm in the STAY mode, turn the key to the right and hold for longer than 10 seconds, then release. Keypads will beep three times and the red light will flash slowly. Disarming To disarm the partition, turn the key to the right and release. If an alarm has occurred, the red light will be flashing rapidly (memory of alarm). NOTE: Your system may be programmed to use the keyswitch to silence fire alarms without affecting the status of the burglary portion of the system. Check with your installer to see if this feature has been enabled. GREEN RED k e ys witch-001-V1