Honeywell Notifier Nfs28 Manual

AP/N DOC-01-049:A  
Document DOC-01-049
22/12/2015                    Rev:
Fire Alarm Control Panel
NFS2-8
Installation, Commissioning &
Configuration Manual
Australian Edition 

INFS2-8 Installation Manual — P/N DOC-01-049:A  22/12/2015
Documentation Feedback
Your feedback helps us keep our documentation up-to-date and accurate. If you have any comments or suggestions 
about our online Help or printed manuals, you can email us.
Please include the following information:
•Product name and version number (if applicable)
•Printed manual or online Help
•Topic Title (for online Help)
•Page number (for printed manual)•Brief description of content you think should be 
improved or...

Honeywell Limited trading as NOTIFIER INERTIA (A.B.N. 74 000 646 882)
7 Columbia Court • Norwest Business Park • Baulkham Hills • NSW 2153 Australia
P.O.Box 6832 • Baulkham Hills Business Centre • NSW 2153 Australia
telephone (61-2) 9899 4155 • fax (61-2) 9899 4156 • www.inertia.com.au
NFS 2-8Installation and CommissioningManual
Addendum
Section 8, Page 32
The stated manufacturersenvironmentalOperating environment of-5oC to 45oChas
been reducedto-5oC to 40oC foruse inAustralia. 

EN 54 & ISO 7240 2- 8 ZoneConventional Fire Control Panel
Installation, Commissioning &
Configuration Manual
997-492-000-6, Issue 6.0
For use with NFS 2-8 and FLS 2-8 Fire Control Panels 

997-492-000-6, Issue 6July 2011
i
EN 54 & ISO 7240 2-8 Zone Conventional Fire Panel - Installation & Configuration Manual
Contents
1 Introduction
1.1 Manual Purpose
.............................................. 1
1.2 System Design & Planning .............................. 1 1.2.1 Personel ..................................................... 1
1.3 General ........................................................... 1
1.4 CE Marking ..................................................... 2
1.5 EN54...

997-492-000-6, Issue 6
July 2011ii
EN 54 & ISO 7240 2-8 Zone Conventional Fire Panel - Installation & Configuration Manual
6.3.4 2-Way Relay PCB (Optional) ................... 16
6.3.5 8-Way Relay PCB (Optional) ................... 16
6.3.6 4-Way Sounder PCB ................................ 16
6.4 Powering the  Panel ....................................... 17
6.4.1 Standby Batteries ..................................... 17
6.5 Configuration and  Handover ......................... 20
6.6 Commissioning...

iii
NFS 2-8 Fire Control Panel
FireLite FLS 2-8 Fire Control Panel 

997-492-000-6, Issue 6July 2011
1
EN 54 & ISO 7240 2-8 Zone Conventional Fire Panel - Installation & Configuration Manual
1 Introduction
1.1 Manual Purpose
The purpose of this manual  is to provide the user with all
recommended procedures and full technical details for the
successful installation, commissioning and configuration
of the EN 54 (and ISO 7240) 2-8 Zone Conventional Fire
Control Panel.
The descriptions and procedures apply to the NFS 2-8
and FLS 2-8 fire control panels.
Procedures described...

997-492-000-6, Issue 6
July 20112
EN 54 & ISO 7240 2-8 Zone Conventional Fire Panel - Installation & Configuration Manual
As a default, the panel is configured without delays to
outputs. If delays are to be configured, refer to  Section
7.8 Primary & Secondary Delays  for details.
While every effort is made to ensure the accuracy of the
content of this manual, the manufacturer reserves the right
to change the information without notice.
Installation
The control panel is easy to install providing the...

997-492-000-6, Issue 6July 2011
3
EN 54 & ISO 7240 2-8 Zone Conventional Fire Panel - Installation & Configuration Manual
1.5 EN 54 Functions
This fire control panel is designed to comply with the
requirements of EN 54 Part 2/4. In addition to the basic
requirements of EN 54-2, the panel may be configured to
conform with the following optional functions - the applicable
clauses of these standards are referenced as follows:
Options Clause
Indications:
Fault signal from fire protection equipment 7.10.4...