Honeywell Total Connect 2 Manual
Have a look at the manual Honeywell Total Connect 2 Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 178 Honeywell manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
![Page 4
4
Events Rules and Notifications
This enables you to view events that result from your security system, IP video cameras and automation
devices (Z-Wave
® devices).
Security events are stored for 90 days, and video events are stored for 90 days or a maximum of
approximately 100 MB. In either case, older events are deleted to make room for new events.
Setting Up Event Notifications
You can choose which system events will be sent, via email and/or text me\
ssage, to a particular user or
group of users....](http://img.usermanuals.tech/thumb/35/104370/w64_total-connect-2-manual-1523543461_d-3.png "Page 4
4
Events Rules and Notifications
This enables you to view events that result from your security system, IP video cameras and automation
devices (Z-Wave
® devices).
Security events are stored for 90 days, and video events are stored for 90 days or a maximum of
approximately 100 MB. In either case, older events are deleted to make room for new events.
Setting Up Event Notifications
You can choose which system events will be sent, via email and/or text me\
ssage, to a particular user or
group of users....")
![Page 5
5
5. Enter a subject name for the notification. Then from the “Send To” drop-down menu, select the user group
to notify (ensure the “Enabled” box is checked). To add another user group to be notified, click “Notification”
again and repeat.
6. Repeat for all events that require notifications.
7. Click Save. The “default group” will be notified whenever an AC loss condition occurs.
Sensor Open Event Notification
“Sensor Open” condition (flood) was chosen to notify the user \
or “default group” of users....](http://img.usermanuals.tech/thumb/35/104370/w64_total-connect-2-manual-1523543461_d-4.png "Page 5
5
5. Enter a subject name for the notification. Then from the “Send To” drop-down menu, select the user group
to notify (ensure the “Enabled” box is checked). To add another user group to be notified, click “Notification”
again and repeat.
6. Repeat for all events that require notifications.
7. Click Save. The “default group” will be notified whenever an AC loss condition occurs.
Sensor Open Event Notification
“Sensor Open” condition (flood) was chosen to notify the user \
or “default group” of users....")
![Page 6
6
Video Triggered Event Notification
Video images can be triggered and captured through different system events. For example, you can receive a
video notification on arming, disarming, any system alarms and sensor \
opening including Z-Wave
® devices.
In the example below, a video camera will detect motion when the security system is armed aw\
ay. Any
detected motion will be used to trigger a notification to the user or \
“default group” of users. This type of
notification might be used when you want...](http://img.usermanuals.tech/thumb/35/104370/w64_total-connect-2-manual-1523543461_d-5.png "Page 6
6
Video Triggered Event Notification
Video images can be triggered and captured through different system events. For example, you can receive a
video notification on arming, disarming, any system alarms and sensor \
opening including Z-Wave
® devices.
In the example below, a video camera will detect motion when the security system is armed aw\
ay. Any
detected motion will be used to trigger a notification to the user or \
“default group” of users. This type of
notification might be used when you want...")
![Page 7
7
Scheduled Event Notification
If you want to receive an email and/or text message during certain times of the day, you would create a
scheduled event notification.
In this example; when the “High Value Tool Room” is opened during the night shift, a notification will be \
sent to
the “default group” of users. This type of notification might be used when you wan\
t to be notified of an event
that might occur during a certain time schedule when the security system\
is disarmed. When this event occurs...](http://img.usermanuals.tech/thumb/35/104370/w64_total-connect-2-manual-1523543461_d-6.png "Page 7
7
Scheduled Event Notification
If you want to receive an email and/or text message during certain times of the day, you would create a
scheduled event notification.
In this example; when the “High Value Tool Room” is opened during the night shift, a notification will be \
sent to
the “default group” of users. This type of notification might be used when you wan\
t to be notified of an event
that might occur during a certain time schedule when the security system\
is disarmed. When this event occurs...")
![Page 8
8
Locations
Honeywell Total ConnectTM will conveniently allow for multiple location control from a single login.
Multiple locations must be added by the dealer, however, they may be edited by the “Master User”.
See example below.
Edit Slide Show
The “Edit Slide Show” feature is supported by our LYNX Touch control systems. It allows you to add,
crop and delete photos. Pictures are cropped to 480 x 272 pixels.
» The files must be either .JPG or .PNG, and the size must be less than \
2 MB
» Up to 13...](http://img.usermanuals.tech/thumb/35/104370/w64_total-connect-2-manual-1523543461_d-7.png "Page 8
8
Locations
Honeywell Total ConnectTM will conveniently allow for multiple location control from a single login.
Multiple locations must be added by the dealer, however, they may be edited by the “Master User”.
See example below.
Edit Slide Show
The “Edit Slide Show” feature is supported by our LYNX Touch control systems. It allows you to add,
crop and delete photos. Pictures are cropped to 480 x 272 pixels.
» The files must be either .JPG or .PNG, and the size must be less than \
2 MB
» Up to 13...")
![Page 9
9
Automation
This section is for Honeywell security products that support Z-Wave® automation devices, such as LYNX Touch
control systems, the Tuxedo Touch
TM security and home/business controller and the VISTA Automation Module
(VAM). Z-Wave automation allows control of door locks, lights, outlets, shades and thermostats. In addition t\
o
manual control of these Z-Wave devices through LYNX Touch control systems, Tuxedo Touch or Honeywell Total
Connect
TM Remote Services, you can create a “Scene” that...](http://img.usermanuals.tech/thumb/35/104370/w64_total-connect-2-manual-1523543461_d-8.png "Page 9
9
Automation
This section is for Honeywell security products that support Z-Wave® automation devices, such as LYNX Touch
control systems, the Tuxedo Touch
TM security and home/business controller and the VISTA Automation Module
(VAM). Z-Wave automation allows control of door locks, lights, outlets, shades and thermostats. In addition t\
o
manual control of these Z-Wave devices through LYNX Touch control systems, Tuxedo Touch or Honeywell Total
Connect
TM Remote Services, you can create a “Scene” that...")
![Page 10
10
Creating a Z-Wave® Automation Scene
Creating scenes with Z-Wave® devices can enhance your lifestyle and help you save money and energy
without any change in your daily routine.
Here we will use the Z-Wave automation feature to create a simple scene to control your Z-wave thermostat
when you “disarm”.
1. Click “Create New”. In the “Scene Name” field, enter the name “Disa\
rm” (for example), click “Icon”.
2. Click security icon that displays the house.
3. Check box above red thermostat.
4. Click...](http://img.usermanuals.tech/thumb/35/104370/w64_total-connect-2-manual-1523543461_d-9.png "Page 10
10
Creating a Z-Wave® Automation Scene
Creating scenes with Z-Wave® devices can enhance your lifestyle and help you save money and energy
without any change in your daily routine.
Here we will use the Z-Wave automation feature to create a simple scene to control your Z-wave thermostat
when you “disarm”.
1. Click “Create New”. In the “Scene Name” field, enter the name “Disa\
rm” (for example), click “Icon”.
2. Click security icon that displays the house.
3. Check box above red thermostat.
4. Click...")
![Page 11
11
Additional Information
See the help tab in the upper right hand corner where you can take an interactive tour of your new remote system,
and see how-to videos on notification setup, user management and lifes\
tyle setup. Also included is an extensive
Honeywell Total Connect
TM Remote Services end-user guide.
13
7. Set the thermostat to 62˚ and click the hold button.
8. Save the scene.
9. Click the green “Run” button to verify the automation devices action. Make any\
changes as necessary.
Note when...](http://img.usermanuals.tech/thumb/35/104370/w64_total-connect-2-manual-1523543461_d-10.png "Page 11
11
Additional Information
See the help tab in the upper right hand corner where you can take an interactive tour of your new remote system,
and see how-to videos on notification setup, user management and lifes\
tyle setup. Also included is an extensive
Honeywell Total Connect
TM Remote Services end-user guide.
13
7. Set the thermostat to 62˚ and click the hold button.
8. Save the scene.
9. Click the green “Run” button to verify the automation devices action. Make any\
changes as necessary.
Note when...")
11 Additional Information See the help tab in the upper right hand corner where you can take an interactive tour of your new remote system, and see how-to videos on notification setup, user management and lifes\ tyle setup. Also included is an extensive Honeywell Total Connect TM Remote Services end-user guide. 13 7. Set the thermostat to 62˚ and click the hold button. 8. Save the scene. 9. Click the green “Run” button to verify the automation devices action. Make any\ changes as necessary. Note when using the scene: Now that you have created a “scene” you have two options to operate the “scene”.\ Option 1. Map the “scene” to an action (i.e. arm away/disarm). Option 2. Manually turn on the “scene” at the touchscreen or remotely through Honeywell Total Connect TM via your mobile device.
For more information: www.honeywell.com/security Automation and Control Solutions Honeywell Security Products Americas 2 Corporate Center Dr. Suite 100 P.O.Box 9040 Melville, NY 11747 1.800.467.5875 www.honeywell.com L/TCBUG/D August 2014 © 2014 Honeywell International Inc.