HP 5500 Ei 5500 Si Switch Series Installation Guide

							 76 
IRF fabric setup flowchart, 38 
LED, 66 
LEDs, 68 
maintenance and troubleshooting, 44 boot ROM password loss, 44 
configuration terminal problems, 46 
console login password loss, 44 
fan failure, 46 
fixed power supply failure, 44 
hot swappable power supply failure, 46 
password loss, 44 
power supply failure, 44 
manuals, 48 
mounting brackets, 7 
mounting the switch  workbench, 15 
mounting the switch on a workbench, 15 
non-PoE switches, 58 
panel views, 52, 53, 54, 55, 56 
password loss, 44 
physical specifications, 51 
planning IRF fabric setup, 39 
planning IRF topology and connections, 40 
PoE switches, 58 
port mode LED, 70 
Ports, 66 
ports and interface card slots, 51 
power consumption specifications for non-PoE  switches, 58 
power consumption specifications for PoE switches,  58 
power input types, 57 
power specifications, 57 
power supply status LEDs, 69 
powering on the switch, 32  preparing for installation, 1 
rack 
mounting requirements, 3 
rack-mounting  installing switch by using only front mounting brackets, 8 
rack-mounting by using front and rear mounting  brackets, 10 
rack-mounting by using front mounting brackets and  a rack shelf, 10 
rack-mounting by using only front mounting brackets,  8 
removing a dedicated  CX4/SFP+ cable, 26 
removing a power supply, 20 
removing an interface card, 26 
RPS compatibility, 58 
RPS DC input voltage specifications, 58 
RPS DC input voltage specifications and RPS  compatibility, 58 
RPS status LED, 69 
safety installation recommendations, 2 
setting terminal parameters, 29 
setting up an IRF fabric, 38  accessing the IRF fabric to verify the configuration, 43 
configuring basic IRF settings, 42 
connecting the physical IRF ports, 43 
identifying physical IRF ports on the member  switches, 41 
identifying the master switch and planning IRF  member IDs, 39 
IRF fabric setup flowchart, 38 
planning IRF fabric setup, 39 
planning IRF fabric size and the installation site,  39 
planning IRF topology and connections, 40 
planning the cabling scheme, 41  
						

							 77 
setting up the configuration environment, 28 
seven-segment LED, 70 
SFP port, 66 
SFP port status LED, 72 
SFP/SFP+/XFP transceiver modules, 61 
SFP/SFP+/XFP transceiver modules and SFP+/CX4  cables, 61 
SFP+ cables, 64 
SFP+/CX4 cables, 61 
site requirements 
altitude, 2 
dust, 2 
gases, 2  humidity, 2 
rack-mounting, 3 
temperature, 2 
subscription service, 48 
support and other resources, 48 
switch 
installing the, 4 
symbols, 49 
system status LED, 68 
technical specifications, 51 
terminal parameters, 29 
websites, 48 
workbench mounting the switch, 15