HP 8610 E Owners Manual

Print photos
Do not leave unused photo paper in the input tray. The paper might start to curl, which could impair
the quality of your printout. Photo paper should be flat before  printing.
TIP:This printer includes HP ePrint,  a free service from HP that allows you to print documents on
your HP ePrint-enabled printer a nytime, from any location, and without any additional software or
printer drivers. For more information, see 
HP ePrint on page 91.
To print a photo from the computer (Windows)
1.Load...

NOTE:The following options are availab le for your printer. Locations for the options can vary
from one application to another.
a. Choose the appropriate paper size in the  Paper Size pop-up menu.
b. Select an  Orientation .
c. From the pop-up menu, choose  Paper Type/Quality, and then choose the following
settings:
● Paper Type
: The appropriate photo paper type
● Quality
: Best  or Maximum dpi
● Click the 
Color Options  disclosure triangle, and then choose the appropriate  Photo Fix
option.
◦ Off:...

Print using the maximum dpi
Use the maximum dots per inch (dpi) mode to print high-quality, sharp images on photo paper.
Printing in maximum dpi takes longer than printing with other s ettings and requires a large amount of
memory.
To print in maximum dpi mode (Windows) 1.From your software, select  Print.
2. Make sure your printer is selected.
3. Click the button that opens the  Properties dialog box.
Depending on your software application, this button might be called  Properties, Options , Printer...

Print on both sides (duplexing)
You can print on both sides of a sheet of paper automatically using the automatic t wo-sided printing
accessory (duplexer).
NOTE: Two-sided printing requires an  automatic two-sided printing accessory (duplexer) to be
installed on the printer.
NOTE: You can perform manual duplexing  by first printing only the odd pages, flipping the pages
over, and then printi ng only the even pages.
To print on both sides of the page (Windows)
1.From your software, select  Print.
2. Make...

Tips for print success
For good printing experience, HP ink cartridges should be correctly installed, have sufficient ink, and
working properly; and paper should be properly loaded with corr ect print settings.
Ink tips ●If the print quality is not acceptable, see 
Solve printing problems on page 131 for more
information.
● Use Original HP ink cartridges.
● Install both the black and 
color cartridges correctly.
For more information, see 
Replace the ink cartridges on page 99.
● Check the estimated ink...

◦Borderless Printing
: Select this feature to print p hotos without border. Not all paper types
support this feature.  You will see an alert icon beside the option if the selected paper type
in the  Media drop-down list do es not support it.
◦ Preserve Layout
: This feature only works with the duplex printing. If the imag e is larger than
the printable area, select this  feature to scale the page content to be within the smaller
margins so that extra pages are not created.
◦ HP Real Life Technologies
:...

Notes●Original HP ink cartridges are d
esigned and tested with HP prin ters and papers to help you
easily produce great res ults, time after time.
NOTE:HP cannot gua rantee the quality or reliability  of non-HP supplies. Product service or
repairs required  as a result of using a  non-HP supply will not  be covered under warranty.
If you believe you purchased Original HP ink cartridges, go to 
www.hp.com/go/anticounterfeit.
● Ink level warnings and
 indicators provide estimates for plannin g purposes...

52 Chapter 3   PrintENWW 

4 Copy and scan
●Copy
●
Scan
ENWW 53 

Copy
Using the Copy menu on the printer control pa nel display, you can easily sele ct the number of copies
and color or black-and-white copying.
You can also access advanced settings, such as change the paper  type and size, adjust the
darkness of the copy, or resize the copy.
To copy documents 1.Make sure you have paper loaded in the main tray. For more info rmation, see 
Load paper
on page 23.
2. Place your original print-side d own on the scanner glass or pri nt-side up in the ADF.
For more...