HP DeskJet F4180 User Manual

NOTE:If a photo print cartridge is also installed, the print quality is enhanced. A 
photo print cartridge can be purchased separately if it is not included with the HP All-
in-One.
To print in Maximum dpi mode 
1. Make sure you have paper loaded in the input tray. 
2. On the File menu in your software application, click Print. 
3. Make sure the HP All-in-One is the selected printer. 
4. Click the button that opens the Properties dialog box. 
Depending on your software application, this button might be...

7.For binding, do one of the following: 
• For binding on the top like a notebook or calendar, select the  Flip Pages Up check 
box. 
This causes the odd and even pages of your document to print opposite of each 
other top-to-bottom. This ensures that the top of the page is always at the top of 
the sheet when you flip the pages up in your bound document.
5
3
1
• For binding on the side like a book or magazine, click to clear the  Flip pages 
up  check box. 
This causes the odd and even pages of your...

To print a multiple-page document as a booklet 
1. Load paper into the input tray. 
The paper should be thick enough that the images do not show through to the other 
side. 
2. On the File menu in your software application, click Print. 
3. Make sure the HP All-in-One is the selected printer. 
4. Click the button that opens the Properties dialog box. 
Depending on your software application, this button might be called  Properties, 
Options , Printer Setup, Printer, or Preferences. 
5. Click the Features...

10.Follow the instructions that appear on your screen for reloading the paper to print on 
the second side, and then click  Continue. 
11. When the entire document has finished printing, fold the stack of paper in half, so that 
the first page is on top, then staple the document along the crease.
TIP: For best results, use a saddle stapler, or a heavy-duty stapler with a long 
reach to staple the booklet.
13 5 
7 911
Figure 7-1 Left-edge binding for left-to-right languages
135 
7911
Figure 7-2 Right-edge...

4.Click the button that opens the Properties dialog box. 
Depending on your software application, this button might be called  Properties, 
Options , Printer Setup, Printer, or Preferences. 
5. Click the Features tab. 
6. In the Pages per sheet list, click 2, 4, 6, 8, 9, or 16. 
7. In the Page Order list, click an appropriate page order option. 
The sample output graphic is numbered to show how the pages will be ordered if you 
select each option. 
8. Click OK, and then click Print or OK in the Print...

7.Click Page Order in the Layout Options list, and then click Front to Back.
NOTE:If you set your document to print on both sides of the page, the Front to 
back  option is not available. Your document will automatically print in the correct 
order.
8. Click OK, and then click Print or OK in the Print dialog box. 
When you are printing multiple copies, each set is printed completely before the next 
set is printed.
Reverse an image for iron-on transfers
This feature reverses an image so you can use  it...

6.In the Basic Options area, click the appropriate transparency type in the Paper 
Type  list.
TIP:If you want to make notations on the back of the transparencies and erase 
them later without scratching the original, click the  Advanced tab, and select 
the  Mirror Image check box.
7.In the Resizing Options area, click an appropriate size in the Size list. 
8. Click OK, and then click Print or OK in the Print dialog box. 
The HP All-in-One automatically waits fo r transparencies to dry before releasing...

Print a poster
You can create a poster by printing a document on multiple pages. The HP All-in-One 
prints dotted lines on some pages to indicate where to trim the pages before taping them 
together.
To print a poster 
1. Make sure you have paper loaded in the input tray. 
2. On the File menu in your software application, click Print. 
3. Make sure the HP All-in-One is the selected printer. 
4. Click the button that opens the Properties dialog box. 
Depending on your software application, this button...

7.In the Poster Printing drop-down list, click either 2x2 (4 sheets); 3x3 (9 sheets); 
4x4 (16 sheets) ; or 5x5 (25 sheets). 
This selection tells the HP All-in-One to enlarge your document so that it fits on 4, 9, 
16, or 25 pages. 
If your original document is multiple pages , each of those pages will be printed on 4, 
9, 16, or 25 pages. For example, if you have a one-page original and you select 3x3, 
you will get 9 pages; if you select 3x3 for a two-page original, 18 pages will print. 
8. Click OK,...

To stop a print job from the computer 
▲ You can cancel most print jobs from the print queue. For more information about how 
to do this, see the Windows Help. 
Related topics
Control panel buttons
Resume a print job
If an error occurs while printing, you may need to resume the job from the HP All-in-One 
or the computer after you address the error. 
To resume a print job from the control panel 
▲ On the control panel, press Resume. 
To resume a print job from the computer 
▲ You can resume some print...