HP IPAQ H5400 Series Pocket PC Reference Guide

							10–8 Reference Guide
Using the Universal Remote
Change a Device
You can change the setup information for a device.
1. From the Start menu, tap Nevo.
2. Tap the Room icon, then select the room containing the 
device.
3. Tap the icon for the device on the wheel.
4. Tap the Wrench icon, then Edit Device....
5. Follow the on-screen instructions to make the changes.
Delete a Device
1. From the Start menu, tap Nevo.
2. Tap the device icon.
3. Tap the Wrench icon, then Delete Device.
4. Tap Ye s to confirm the deletion.
281984-001.book Page 8 Thursday, September 26, 2002 5:05 PM 
						

							Using the Universal Remote
Reference Guide 10–9
Turn on a Device
1. From the Start menu, select Nevo.
You can choose Start, Programs, then Nevo.
2. Click a device on the wheel to position it at the top of the 
wheel.
3. Tap the Power button.
281984-001.book Page 9 Thursday, September 26, 2002 5:05 PM 
						

							10–10 Reference Guide
Using the Universal Remote
Add Activities
You can customize the keys on devices to switch activities. You 
can turn on more than one device at a time.
To add an activity:
1. Tap the Room icon to select where the devices are located.
2. Tap the Add Activity icon or tap the Wrench icon, then Add 
Activity.
3. Tap Next.
281984-001.book Page 10 Thursday, September 26, 2002 5:05 PM 
						

							Using the Universal Remote
Reference Guide 10–11
4. Tap Next.
5. Tap the icon for device you want to control.
6. Record the keystrokes for commanding multiple operations 
into one activity.
✎To command multiple devices, tap the Home icon, select another 
device, and follow the mini wizard to enter keystroke commands.
7. Tap the Wrench icon and select Stop.
8. Tap the Wrench icon, then tap Te s t  to test your keystrokes.
281984-001.book Page 11 Thursday, September 26, 2002 5:05 PM 
						

							10–12 Reference Guide
Using the Universal Remote
9. Tap Finish Wizard.
10. Assign an icon to the activity. Activities are designated in 
gold on the wheel.
281984-001.book Page 12 Thursday, September 26, 2002 5:05 PM 
						

							Using the Universal Remote
Reference Guide 10–13
11. Assign a name to the activity, then tap Next.
12. Notice the activity on the wheel.
281984-001.book Page 13 Thursday, September 26, 2002 5:05 PM 
						

							10–14 Reference Guide
Using the Universal Remote
Change an Activity
You can change an activity assigned to a room.
1. From the Start menu, tap Nevo.
2. Tap the Room icon, then select the room for the activity.
3. Tap the icon for the activity.
4. Tap the Wrench icon, then Edit Activity....
5. Follow the wizard to make changes and enter keystrokes.
✎Make sure you check “Record a new sequence of keystrokes” if 
you want to change the input strokes.
6. Tap the Wrench icon, then Stop.
7. Tap the Wrench icon, then Te s t .
8. Tap the Wrench icon, then Finish Wizard.
Assign a new name to your favorite channel.
Delete an Activity
1. From the Start menu, tap Nevo.
2. Tap the activity icon.
3. Tap the Wrench icon, then Delete Activity.
4. Tap Ye s to confirm the deletion.
281984-001.book Page 14 Thursday, September 26, 2002 5:05 PM 
						

							Using the Universal Remote
Reference Guide 10–15
Set Up a Room
You can program the universal remote to control devices in 
each room.
To set up a room:
1. From the Start menu, tap Nevo.
2. Tap the Room icon, then Add Room.
3. Tap Next.
4. Assign an icon to the room, then tap Next.
5. Enter a room label and select a region from Regions down 
arrow list.
6. Tap Next.
Add a Device to a Room
You must set up a room before you can assign a device to it. 
For more information on setting up a room, see section “To set up 
a room.”
1. From the Start menu, tap Nevo.
2. Tap the Room icon.
3. Select a room.
4. Tap the Add Devices icon to start the Device wizard.
5. Add the device to your room.
281984-001.book Page 15 Thursday, September 26, 2002 5:05 PM 
						

							10–16 Reference Guide
Using the Universal Remote
Delete a Room
1. From the Start menu, tap Nevo.
2. Tap the Room icon, then select the room to delete.
3. Tap the Room icon again, then Delete Room.
4. Tap Ye s to confirm the deletion.
Add a Favorite Channel
You can add a favorite channel to your device.
✎Ta p  t h e  Channel icon to modify a channel setup. If you have 
multiple pages of favorites, tap the Right and Left arrow icons to 
scroll through the pages.
To add a favorite:
1. From the Start menu, tap Nevo.
2. Tap the Favorites icon, then tap the Wrench icon.
3. Tap Add Favorite.
4. Follow the on-screen instructions of the wizard.
5. Tap the Home Page icon.
6. Tap the device for the channel selection control.
7. Tap the correct key sequence for the channel.
✎If the device requires you press Enter, then include Enter in the 
key sequence.
8. Tap the Wrench icon, then Stop.
9. Tap the Wrench icon, then Te s t .
10. Tap the Wrench icon, then Finish.
281984-001.book Page 16 Thursday, September 26, 2002 5:05 PM 
						

							Using the Universal Remote
Reference Guide 10–17
11. Assign a name to your favorite channel.
12. Tap the Wrench icon, then select Add Page.
Change a Favorite
You can change a stored favorite channel.
1. From the Start menu, tap Nevo.
2. Tap the Favorites icon, then select the favorite to change.
3. Tap the Wrench icon, then Edit Favorite....
4. Follow the wizard to make changes.
✎Make sure you check “Record a new sequence of keystrokes” if 
you want to change the input strokes.
5. Tap the Wrench icon, then Stop.
6. Tap the Wrench icon, then Te s t .
7. Tap the Wrench icon, then Finish.
8. Assign a new name to your favorite channel.
Set Up User Profile
You can set up multiple users for the universal remote. Each user 
can have his/her own personal preferences and favorites.
To set up a user profile:
1. From the Start menu, tap Nevo.
2. Tap the User icon, the Add User.
3. Tap Next.
4. Type a name for the user, then tap Next.
281984-001.book Page 17 Thursday, September 26, 2002 5:05 PM