HP Photosmart C4480 User Manual

Chapter 2
8 HP All-in-One overview
HP All-in-One overview
 

3 Find more information
You can access a variety of resources, both printed and onscreen, that provide
information about setting up and using the HP All-in-One.
Setup Guide
The Setup Guide provides instructions for setting up the HP All-in-One and
installing software. Make sure you follow the steps in the Setup Guide in order.
If you have problems during setup, check the Setup Guide for troubleshooting
information, or see  “
Troubleshooting” on page 87  in this onscreen Help.
Basics Guide
The Basics...

Chapter 3
10 Find more information
Find more information
 

4 How do I?
This section contains links to commonly performed tasks, such as sharing and printing
photos and optimizing your print jobs.
•“
How do I make a borderless copy of a photo?” on page 58
•“
How do I print borderless photos on 10 x 15 cm (4 x 6 inch) paper?” on page 36
•“
How do I get the best print quality?” on page 32
•“
How do I print on both sides of the paper?” on page 40
•“
How do I make multiple copies of a document?” on page 56
How do I? 11
How do I?
 

Chapter 4
12 How do I?
How do I?
 

5 Connection information
The HP All-in-One comes equipped with a USB port so you can connect directly to a
computer using a USB cable. You can also share the product over an existing home
network.
This section contains the following topics:
•
Supported connection types
•
Use printer sharing
Supported connection types
The following table contains a list of supported connection types.
DescriptionRecommended number
of connected
computers for best
performanceSupported software
featuresSetup instructions
USB...

Chapter 5
14 Connection information
Connection information
 

6 Load originals and load paper
You can load many different types and sizes of paper in the HP All-in-One, including letter
or A4 paper, photo paper, transparencies, and envelopes. By default, the HP All-in-One
is set to detect the size and type of paper you load in the input tray automatically and then
adjust its settings to generate the highest quality output for that paper.
If you are using special papers, such as pho to paper, transparency film, envelopes, or
labels, or if you experience poor print...

3.Close the lid.
To load a thick publication on the glass
1. Lift the lid to the open position, grasp the sides of the lid, and then push the lid away
from the product until it comes off.
2.Load the thick publication print side down on the right front corner of the glass.
TIP: For more help on loading the thick publication, refer to the engraved guides
along the edge of the glass.
Chapter 6
16 Load originals and load paper
Load originals and load paper
 

3.Place the lid over the thick publication while you are copying or scanning.
4.When you finish copying or scanning, replace the lid by inserting the tabs on the lid
back into the appropriate slots of the product.
Choose papers for printing and copying
You can use different types and sizes of paper in the HP All-in-One. Review the following
recommendations to get the best printing and copying quality. If you use plain or photo
paper, the HP All-in-One can automatically detect the paper type and size. If...