HP Sw350 User Manual

							7
Getting Started
Attaching the Wrist Strap
To reduce the risk of dropping the camera, it is strongly 
recommended to attache and use the provided camera strap.
Follow these instructions to attach the wrist strap to your camera 
to better protect your new camera:Insert the smaller loop of the strap in the strap eyelet.
1. 
Thread the larger loop of the strap though the short loop and 
2. 
pull tight to attach the strap to the camera.
Inserting the Battery
Follow these instructions to insert the NP45 Lithium-ion (Li-ion) battery into the battery compartment. 
If the battery is already installed, make sure to power off the camera before removing and inserting a 
recharged or new battery. Please read “Battery Information” before inserting/removing battery.
If the battery is already installed, make sure to power off the camera before removing and 
1. 
inserting a recharged or new battery.
Open the battery compartment at the bottom of the camera.
2. 
Insert the battery into the compartment with the terminal facing inside the camera.
3.  
						

							8
Close the battery compartment.
4. 
Inserting an SD/SDHC Memory Card
Expand your camera’s storage by using SD or SDHC memory cards.
Open the SD card compartment at the bottom of the camera.
1. 
Insert the SD/SDHC card into the memory card slot with the 
2. 
metallic contacts facing the front side of the camera.
Push the SD/SDHC card into the memory slot until it clicks into 
3. 
place.
Close the SD card compartment.
4.  
						

							9
- To remove the SD/SDHC card
Open the battery compartment.
1. 
Gently push the card until it clicks and pops out.
2. 
Pull out the card carefully.
3. 
Charging the battery
The battery that comes along with your package is not fully charged. You need to charge the battery 
before using the camera.
Insert the battery into the battery charger.
1. 
Connect the battery charger to the adaptor.
2. 
Plug the adaptor to the main outlet.
3. 
Please charge the battery at least 2.5 hours for the initial use. Beyond the initial use, please charge your 
battery until the LED indicator on your charger turns green. 
						

							10
Camera Memory
Your camera supports SD cards of up to 4GB in size. It also supports SDHC cards with a maximum 
capacity of 32GB. If there is a storage card inserted in the memory slot, the camera automatically saves 
all images, videos and audio clips in the external storage card. The 
 icon indicates the camera is 
using SD card.
WarningNot all cards may be compatible with your camera. When purchasing additional cards, please 
• 
check the card specifications. Please use class 4 rated SD/SDHC or greater to ensure optimal 
operation. You can ensure optimal compatibility by purchasing HP brand SD cards. 
						

							11
Camera Views
Front View
1
2
3
4
Self-Timer LED / AF Assist Lamp
1. 
Flash
2. 
Zoom Lens
3. 
Microphone
4. 
Back View
5
7
8
9
10
6
LCD screen
5. 
Operation Lamp
6. 
Menu *4
7. 
Func / Delete *2
8. 
SET / 4-way Navigation Control *3
9. 
Photo Shooting / Video Record /   
10. 
Playback *1 
						

							12
Top View
121314
11
Zoom Toggle
11. 
Stabilzer Button
12. 
Power Button
13. 
Shutter Button
14. 
Bottom View
151617Battery / SD card compartment
15. 
USB
16. 
Tripod screw hole
17. 
Left/Right View
18Strap ring
18.  
						

							13
Button ٭1: Photo Shooting/Video Record/Playback 
Switch to Photo Shooting, Video Record or Playback mode by using the switching button.- Shooting mode
         
Set to Photo Shooting mode to capture images and record audio clips.
• 
Photo 
•  Shooting mode can be further set to mode options like auto and scene selection 
modes.
- Video Record mode
         
Set to Video Record mode to record videos.
• 
- Playback mode
         
Set to Playback mode to view or edit photos, review video and audio clips.
• 
Button ٭2: FUNC/Delete
In Photo Shooting and Video Record mode, press to enter FUNC menu.
In Playback mode, press to delete an image, video or audio clip. 
						

							14
Button ٭3: Navigation Control
The 4-way Navigation Control and the  button allows you to access the various 
menus available from the On Screen Display (OSD). Further functions of these buttons are as 
follows:
Face Tracking/
Rotate Button
Macro Button SET Button
Flash Button
Display Button
Button ٭4: Menu button
Press the  button to enter the setup/settings menu. Press the button again to exit the 
settings menu. 
						

							15
ButtonUsage
SET Confirm a selection when using the OSD menus.
1. 
 
Flash/ Right In Photo Shooting mode, press to scroll through the flash mode options. 
 
1. 
( 
 Auto,  Anti Red-eye,  Slow Sync,  Forced On and  Forced Off )
In Playback mode, press to view the next image, video or audio clip.
2. 
In Playback Video Record, press to fast forward video playback.
3. 
In Menu mode, press to change submenus.
4. 
Macro/ Left In Photo Shooting mode, press to switch focus mode. 
 
1. 
( 
 Macro,  Pan Focus,  Infinity)
In Playback mode, press to view the previous image, video or audio clip.
2. 
In Playback Video Record, press to rewind video playback.
3. 
In Menu, press to exit a submenu or to navigate through the menu selections.
4. 
Up/Face 
Tracking/ Rotate In Menu mode, press to navigate through the menu and submenu selections.
1. 
In Photo Shooting mode, press to turn the face tracking function on and off.
2. 
In Playback Video/ Audio mode, press to Start/Pause video or audio playback.
3. 
In Playback photo mode, press to rotate the image clockwise 90 degrees by each 
4. 
press of the button. This feature is applicable for still images only.
Display/Down In Playback mode, press to change the LCD screen display. Continue to press 
1. 
to cycle through thru the display options and on-screen help. See page 20 for 
additional details.
In Photo Shooting mode, press to change the LCD screen display. Continue to 
2. 
press to cycle through thru the display options and on-screen help. See page 19 
for additional details.
In Menu mode, press to navigate through the menu and submenu selections.
3. 
In Playback Video/ Audio mode, press to stop video/audio playback.
4.  
						

							16
Initial Settings
You will be prompted to set up the language and the date and time when the camera is turned on for 
the first time.
Setting the LanguagePress 
1. 
, ,  or  to move through the selection.
Select a language, and then press 
2. 
 to apply.
Using Setup Menu
You can access the Setup menu whether you are in  Photo Shooting or Playback mode. The Setup menu 
allows you to configure general camera settings.
- To go to Setup Menu:
Press 
1. 
 to launch the Shooting/Playback 
Menu.
Use the 
2. 
 or  key to change the menu 
tab to Setup 
 menu.
Use the 
3. 
 or  key to move through the 
menu selections.
To select an item, press the 
4. 
 button or .
Camera Sounds
Auto Power Of f
Display Timeout
Date & Time 
Language
File Numbering
1minOFF
Change the submenu settings using the 4-way navigation control.
5. 
Press the 
6. 
 button to save and apply settings.