Husqvarna 323 C Service Manual

English – 21
MAINTENANCE
the excess before fitting the filter to the machine. Never use 
common engine oil. This would drain through the filter quite 
quickly and collect in the bottom.
Bevel gear
(323L, 323LD, 325Lx, 325LDx)
The bevel gear is filled with the right quantity of grease at the 
factory. However, before using the machine you should check 
that the bevel gear is filled three-quarters full with grease. Use 
HUSQVARNA special grease.
The grease in the bevel gear does not normally need to be 
changed...

22 – English
TECHNICAL DATA
Technical data
Note 1: Noise emissions in the environment measured as sound power (LWA) in conformity with EC directive 2000/14/EC.
Note 2: Equivalent sound pressure level is calculated as the time-weighted energy total for sound pressure levels under various 
working conditions with the following time distribution: 1/2 idling and 1/2 max speed.
NOTE!   The noise pressure level at operator’s ear and vibrations on the handles are measured with all the approved cutting...

English – 23
TECHNICAL DATA
Note 1: Noise emissions in the environment measured as sound power (LWA) in conformity with EC directive 2000/14/EC.
Note 2: Equivalent sound pressure level is calculated as the time-weighted energy total for sound pressure levels under various 
working conditions with the following time distribution: 1/2 idling and 1/2 max speed.
NOTE!   The noise pressure level at operator’s ear and vibrations on the handles are measured with all the approved cutting 
attachments for the...

24 – English
TECHNICAL DATA
323C
Approved accessoriesTypeCutting attachment guard, Art. no.
Blade shaft thread 3/8 R
Trimmer headTrimmy Fix 3/8” (R)537 02 61-01
Trimmy Hit VII (R)537 02 61-01
Trimmy Hit Junior (R)537 02 61-01
325Cx
Approved accessoriesTypeCutting attachment guard, Art. no.
Blade shaft thread 3/8 R
Trimmer headTrimmy Fix 3/8” (R)537 07 67-01
Trimmy Hit VII (R)537 07 67-01
Trimmy Hit Junior (R)537 07 67-01
323L, 323LD, 325Lx, 325LDx
Approved accessoriesTypeCutting attachment guard, Art....

English – 25
TECHNICAL DATA
EC-declaration of conformity (Applies to Europe only)
We, Husqvarna AB,  SE-561 82 Huskvarna, Sweden, tel: +46-36-146500, declare that the clearing saws Husqvarna 323C, 323L, 
323LD, 325C, 325Cx, 325Lx and 325LDx with serial numbers dating from 2002 onwards (the year is clearly stated on the rating 
plate, followed by the serial number), comply with the requirements of the COUNCIL’S DIRECTIVE:
of June 22, 1998 ”relating to machinery” 98/37/EC, annex IIA.
of May 3, 1989...

1 Super Auto II
Super Auto II 12
3
4
5
6
78
9
10
4,0 m
  13
2,4 mm
.095
~2,0 m
6,5

6
6

15 cm15 cm 

Clic
1
2
3
5
67
10
11
8,5 m
28
4
8
4,2 m
14
2,4-2,7 mm
.095-.106
10 cm
     4
6 15 cm
S35 

1
2
4
3
2,4-2,7 mm
.095-.106
4,25 m
144,25 m
14
B
6 15 cm
A
6 15 cm
S35
5 

´®z+H:h¶6]¨
´®z+H:h¶6]¨
T35
Clic
1
2
3
5
67
9
8,5 m
28
4
8
4,3 m
14
2,4-2,7 mm
.095-.106
10 cm
     4
6 15 cm