Husqvarna 325 C Owners Manual

101 91 71-26
322C
322L
325L
325L 
X-SERIES
Operators manual
Read through the Operator‘s manual carefully and
understand the content before using the machine.
325L XT-SERIES
325C
325C 
X-SERIES 

2 – English
Symbols
SYMBOL EXPLANATION
WARNING! Clearing saws,
brushcutters and trimmers can be
dangerous!
Careless or incorrect use can result in
serious or fatal injury to the operator
or others.
Read through the Operator‘s Manual
carefully and understand the content
before using the machine.
Always use
• A protective helmet where there is
a risk of falling objects
• Ear protection
• Approved eye protection
Checks and/or maintenance should
be carried out with the engine
switched off, with the stop...

English – 3
CONTENTS
List of contents
SYMBOL EXPLANATION
Symbols ............................................................................... 2
CONTENTS
List of contents .................................................................... 3
SAFETY INSTRUCTIONS
Personal protective equipment ............................................. 4
The machine‘s safety equipment .......................................... 4
Control, maintenance and service of the machine‘s safety
equipment...

4 – English
The machine‘s safety equipment
This section describes the machine‘s safety equipment, its
function and how checks and maintenance are carried out to
ensure that it operates correctly. (See the chapter “What is
what“ to locate where this equipment is positioned on your
machine.)
Personal protective equipment
SAFETY INSTRUCTIONS
!
WARNING!
Never use a machine with defective safety
equipment. Follow the control,
maintenance and service instructions
described in this section.
1. Throttle trigger...

English – 5
SAFETY INSTRUCTIONS
4. Vibration
damping system
Your machine is equipped
with a vibration damping
system, which is designed
to give as vibration-free
and comfortable use as
possible.
Use of incorrectly wound
cord or incorrect cutting
equipment increases the
level of vibration.
The machine’s vibration
damping system reduces
the transfer of vibrations
between the engine unit/
cutting equipment and the
machine’s handle unit.
5. Muffler
The muffler is designed to
give the lowest possible noise...

6 – English
3. Cutting
attachment guard
•Ensure that the spray
guard is undamaged and
is not cracked.
•Replace the guard if it
has been exposed to
impact or is cracked.
•Always use the prescribed
blade an guard
combination, see chapter
Technical data.
SAFETY INSTRUCTIONS
Control, maintenance and service of
the machine‘s safety equipment
IMPORTANT INFORMATION
•All service and repairs to the machine require
special training.
•This applies especially to the machine‘s safety
equipment. If the machine does...

English – 7
SAFETY INSTRUCTIONS
6. Cutting equipment
The section describes how through correct maintenance and
through using the right type of cutting equipment you can:
•Obtain maximum clearing capacity.
•Increase the service life of the cutting equipment.
Two basic rules:
1)Only use the cutting
and guard equipment
we recommend! See
chapter “Technical
data“.
2)Check the cutting
equipment with regard
to damage and crack
formation. Damaged
cutting equipment
should always be
replaced.
Cutting equipment
7....

8 – English
SAFETY INSTRUCTIONS
General safety instructions
Transport and storage
•Store and transport the machine and fuel so that any leakage
or fumes do not risk coming into contact with sparks or
naked flames. For example, electric machines, electric
motors, electrical switches/power switches, heaters or the
like.
•When storing and transporting fuel approved containers
intended for this purpose must be used.
•When storing the machine for long periods the fuel tank
must be emptied. Contact your local...

English – 9
!
General working instructions
SAFETY INSTRUCTIONS
Basic working techniques
•Always drop to idling speed after each working operation.
Longer periods running at full throttle without loading the
engine (that is without resistance, which the engine feels
from the cutting equipment when trimming) can lead to
serious engine damage.
Basic safety precautions
1. Observe your surroundings:
•To ensure that people, animals or other things cannot affect
your control of the machine.
•To ensure that the...

10 – English
SAFETY INSTRUCTIONS
Clearing
•The clearing technique
removes all unwanted
vegetation. Keep the
trimmer head just above
the ground and tilt it.
Let the end of the cord
strike the ground around
trees, posts, statues and
the like. NOTE! This
technique increases the
wear on the cord.
•The cord wears quicker
and must be fed forward
more often when
working against stones,
brick, concrete, metal
fences, etc. than when
coming into contact
with trees and wooden
fences.
•When trimming and
clearing you...