Hyundai H Lcd1912 Instruction Manual

ТЕЛЕВИЗОР
ЦВЕТНОГО ИЗОБРАЖЕНИЯ
ЖИДКОКРИСТАЛЛИЧЕСКИЙ (LCD)
LCD TV
Руководство по эксплуатации 
Instruction manual
H-LCD1912
 

Table of contents 
Before you start 
Utilization of the product 
Important safeguards
Installation and connection
ConnectionOutdoor antenna connection
Other connections
Operation
Control elements  Front panel
 Back panel
Remote controller Changing the battery
General operations  AV signal sources
 Teletext operations
 PC screen
OSD operation Picture setting
Sound setting
Setting
Function setting
Channel setting
PC setup
General information
Troubleshooting Causes of interference
Accessories...

23
Table of contentsBefore you start
If you want to dispose this product, do not mix it with general household waste. There is 
a separate collection system for used electronic products in accordance with legislation 
that requires proper treatment, recovery and recycling. Please contact your local authorities for the correct method of disposal. By doing so, 
you will ensure that your disposed product undergoes the necessar y treatment, recovery 
and recycling and thus prevent potential negative effects...

4
Before you start
• Do not place any vase, potted plant, cup, 
medicine and any container with water on this 
product. If the liquid is spilt, it may cause the 
fire, electric shock or breakdown. •  Do not install it at the place on the strong 
magnetic field or current field. It may cause 
break down. This equipment may be observed 
deterioration of the picture by electromagnetic 
radiation in electromagnetic environment. •  Fasten the wheel of the product or shelf 
with wheels when installing this...

5
Сonnection
Outdoor Antenna ConnectionUse 75Ω coaxial cable plug or 300-75Ω 
impedance converter to plug in antenna input 
terminal on the rear of the cabinet.
Other connections•  Connect the audio sources (Including 
DVD, VCDR, CAMCORDER and PC) to the 
proper AUDIO input jacks ‘L’ and ‘R’. •  Connect the video source to the VIDEO 
jack by RCA cable. •  If the video source has a SCART output 
jack, you can connect the signal to the monitor 
by the SCART cable. •  Connect the video source to the S-VIDEO...

6
Operation
Control elements    
Front panel
Back panel
1
2
1. TV/AV button
2. CH+/UP button
3. CH-/DOWN button
4. VOL+/RIGHT button
5. VOL-/LEFT button
6. Power cord connector 7. MENU button
8. POWER button
9. HDMI input
10. VGA input
11. SCART connector
12. S-Video input13. Video input
14. Audio (right) input
15. Audio (left) input
16. PC audio input
17. Earphone output
18. TVRF antenna jack
1. Power indicator
2. Remote control sensor
9
10
11
12
13
14
15
16
17
18
1
2
3
4
5
7 6
8
Downloaded From...

7
Operation
Remote controller (RC)
1.  POWER button
2.  Number buttons
3.  ASPECT button
4.  VOL+/VOL- buttons
5.  DISPLAY button
6.  ENTER button/cursor buttons (
///)
7.  MENU button
8.  P.MODE button
9.  INPUT button
10. HOLD button 
11. TEXT button
12. INDEX button
13. SIZE button 14.  RED button
15.  GREEN button
16.  AUTO button
17.  MUTE button
18.  
 button
19.  NICAM button
20.  CH+/CH- buttons
21.  EXIT button
22.  S.MODE button
23.  SLEEP button
24.  PGUP button
25.  PGDW button
26.  SUBPAGE...

89
OperationOperation
General operations
•  Press POWER button on the unit or on the 
RC to switch on the power, the indication light 
will be in green color. Press POWER button 
again to switch off the power, and the light will 
be in red color. •  The picture setup, sound setup, previous 
channel can be memorized before you switch 
off the unit. The unit will restart under the 
previous state when you switch on it again. •  Press VOL- button repeatedly to decrease 
the volume; press VOL+ button...

89
OperationOperation
corresponding color page displayed at the 
lower parts of teletext screen.
PC screenSelect the VGA input (TV into PC) mode. 
The unit has a VGA jack for a normal 
computer. Connect the monitor with a PC 
by this jack and the unit can be used as the 
monitor for the PC.
OSD operation
Press MENU button on the RC to enter the 
OSD menu. Use use 
/ buttons to select a 
setting page displayed on the screen. Press 
/ buttons to go to the needed 
item, then use 
/ buttons to select...

10
Operation
HDMI source).•  Reset: setting to the factory default.
Function setting
FUNCTION
MOVE SELECT EXIT
SLEEP TIMER
ASPECT
TT LANGUAGE
BLUE SCREEN
SYSTEM LOCK
FTI
•  Sleep Timer: select sleep time to let unit 
go into standby state automatically. •  Aspect: select an LCD screen display 
aspect size which corresponds to your viewing 
requirements. This available aspect size may 
be different for different input source. •  TT language: select needed teletext 
language. •  Blue Screen: select On/Off....