Indesit Wd 12 X Manual

							M
Washing machine
Instructions for installation and use
WD 12 X 
						

							Here are the 13 topics explained in this manual. Read, learn and
have fun: you will discover many secret ways to get a better
wash, more easily and making your washer-dryer last longer.
Quick guide
1. Installation and removal (p. 11)
Installation, after delivery or transport, is the most important operation
for the correct functioning of your washer-dryer. Always check:
1.That the electric system conforms to regulations;
2.That the inlet and draining pipes are connected correctly.
Never use pipes that have already been used.
3.That the washer-dryer is levelled properly; something
wor th checking to aid the performance of your
washer-dryer;
4.That the drums fixing screws have been removed from
the  back of the washer-dryer;
2.What goes in your washer-dryer and how
to start it (p. 2)
A correct distribution of your laundry is vital to the successful
outcome of the wash and the life of the washer-dryer. Learn all the
tips and secrets to dividing your linen: colour, type of fabric.
3. Guide to understanding labels (p. 6)
The symbols on the labels of your garments are easy to understand
and equally important for the success of your wash. The guide
includes simple instructions to help you choose the right tempera-
ture, wash cycles and ironing methods.
4. Useful tips to avoid mistakes (p. 7)
Years back, our grandmothers were the ones who gave us good
advice - and in those days synthetic fibres did not exist: washing
was easy. Today, your washer-dryer offers you helpful advice
allowing you to wash wool even better than an exper t laundress
would by hand.
5. The detergent dispenser (p. 8)
How to use the detergent dispenser and the bleach compartment.
6. Understanding the control panel (p. 3)
Washer-dryer’s control panel is very simple. It has only a few
essential buttons to help you choose any type of wash cycle,
ranging from the most energetic, capable of cleaning a mechanic’s
overalls, to the most delicate for wool. Familiarising yourself with it
will help you get the best out of your wash while helping your
washer-dryer last longer. It’s easy.
7.  Guide to the wash programmes (p. 4)
Herein is an easy table to help you choose the right programme,
temperature, detergents and possible additives. Choose the right
programme and you will get better results with your wash while
saving time, water and energy, day after day.
1  Instructions for installation and use
8. How to dry  (p. 5)
A few handy tips to get the best drying cycle from your appliance.
9. Care and maintenance  (p. 15)
With just a bit of care, it will repay you with loyalty and devotion.
With the necessary upkeep, it will wash for years and years to
come.
10. Problems and solutions  (p. 9 and 10)
Before calling a technician, read these pages: immediate solutions
may be found for a number of problems. If the problem persists,
call your local Indesit customer services who will be pleased to
help. Any failure will be repaired, as soon as possible.
11 . Technical characteristics (p. 10)
Herein are the technical features of your washer-dryer: model type
number, electric and water specifications, size, capacity, speed of
the spin cycle and compliance with Italian and European  regulations.
12. Safety for you and your family (p. 16)
Here you will find the necessary  safety guidelines, and it is
important for you to read this section carefully.
13. Indesit stays with you after your purchase (p. 17)
Indesit supports its products after their purchase by offering you a
range of special services, professional assistance, spare parts
and quality accessories. 
						

							What goes in your washer-dryer?
Before  washing, you can do a great deal to ensure better results. Divide your garments
according to fabric and colour. Read the labels, follow their guidelines.
Before washing.
Divide your washing according
to the type of fabric and colour
fastness.
Empty all pockets (coins, paper,
money and small obejects) and
ensure all loose buttons are
repaired or removed prior to
loading.
How to eliminate the most common stains
Ink and biro Dab with a wad of cotton soaked in methyl alcohol or alcohol at 90°.
Ta r Dab with fresh butter, rub in turpentine then wash immediately.
Wa x Scrape away, then run a hot iron between two sheets of absorbent paper. Then rub in cotton with turpentine or
methyl alcohol.
Chewing gum Rub in nail polish remover and wipe with a clean rag.
Mold Cotton and white linen should be placed in a solution of 5 parts water, one bleach and a spoon of vinegar, then
washed immediately. For other white fabrics, use hydrogen peroxide at 10 volumes and wash immediately.
Lipstick Dab with ether on wool or cotton. Use tricloroetilene for silk.
Nail polish Place a sheet of absorbent paper on the side of the stain, wet it with nail polish remover, shifting the
garment as the sheet gradually changes colour.
Grass Dab with a wad of cotton soaked in methyl alcohol.
Starting the washer-dryer
Starting your washer-dryer in
the right way is important for the
quality of your wash, to help
prevent future problems and
enhance life expectancy of your
appliance. Once you have
loaded your washer-dryer and
added the detergent together
with any fabric conditioner,
always check that:1. The door is closed correctly.
2. The plug is secured in the
socket.
3. The water supply is turned
on.
4. Selector knob A is positioned
on one of the symbols 
 (Stop/
Reset).
Choose the desired programme
The programme is selected
according to the type of garments
that need to be washed. To choose
a programme, refer to the table on
page 4. Turn knob A until the
selected programme is aligned
with the mark on the knob, turn
knob B to the desired temperatu-
re settings,check that knob C is
in the desired position, if
necessary use buttons E, F, G
and lastly, press on/off button H
(I position).
After installing your new washer-dryer, start a wash cycle
by setting programme 1 at 90 degrees.
For more delicate
garments:
protect underwear, tights
and stockings and delicate
items by placing them in a
canvas pouch
Dividing your garments
according to fabric and
colour, is very important
for good results
At the end of the wash cycle...
Lamp I will flash quickly for a few
seconds, then it will begin
flashing more slowly.
Then turn the washer-dryer off
by pressing on-off button H
(O position). You can now open
the washer-dryer door safely.
After having removed the
freshly cleaned washing, leave
the door open to allow air
circulation inside the drum.Always disconnect electricity at
the socket and turn off the water
supply.
Remember that, in the event
of a power failure, or should
the washer-dryer switch itself
off, the programme chosen
will remain in its memory.
The labels say it all.
Always look at the labels: they
tell you everything about your
garment and how to wash it in
the best possible way.
The table on page 6 shows all
meanings behind these
symbols. Their  recom-
mendations are important to
achieve better wash results.
Instructions for installation and use  2
M
Big and small happily
together.
This washer-dryer has a special
electronic control device for even
distribution: before the spin cycle
starts, this device allows the
garments to positions
themselves, to minimise noise
and vibrations during the spin
cycle. 
						

							E
ABCD
FGHIL
The washer-dryer is  equipped
with an extra compartment 4
(provided as an accessory) for
the bleach, to be inserted in
compartment 1.
Easy iron
This function allows your
washing to come out of the
machine without creases,
making it much easier to iron.
You can use it with programmes
3-4 (Cotton), 5-6-7 (Synthetics)
and 9-10 (Delicates).
Press this button in
programmes 5-6-7-9-10 and the
wash cycle will come to a stop
on symbol  
. You can comple-
te it by pressing button E again.
Notes:
- this function should not be
used when button G (stain
removal) has been pressed.
- If you also want to run the
drying cycle, this button is
enabled only if combined with
level 
 (Iron).
Slow spin
Use this button to reduce the
spinning speed from 1200 to
600 rpm for the cotton and linen
programmes and from  850 to
600 rpm  for the synthetic
fabrics programmes.
Stain removal (see page 8)
Thanks to this command, the
washer-dryer will carry out a
more intensive wash that
optimises the  effectiveness of the
liquid additives, thus allowing
more resistant stains to be
removed. When you press the
stain removal button, you cannot
activate the pre-wash.
Here I’m in command
Understanding the control panel
Making the right choice is important. And it’s easy.
Programme selector knob
Use this knob to select the wash
programme.
Turn this knob clockwise only.
To select a programme, you
should turn the knob so that the
symbol/number  of the desired
programme is in line with the
pointer on the knob.
Now press on/off button H
(position I), pilot lamp I will start
flashing.
After 5, the setting will be
accepted, pilot lamp I will stop
flashing (staying lit) and the wash
cycle will begin.
Should you wish to interrupt the
programme in progress or set a
new one, select one of the
symbols 
 (Stop/Reset) and wait
5 : when the cancellation has
been accepted, pilot lamp I
flashes, and you can then turn the
appliance off.
After the wash cycle has been set
and accepted by the washer-
dryer, turning the knob will have
no effect (except for when it is on
position 
 Stop/Reset).
Temperature control knob
It is used to set the wash tempe-
rature in the recommended
programme table on pag. 4. It also
allows you to reduce the tempe-
rature recommended for the
selected programme, and even
to set a cold wash cycle (
).
Drying cycle knob
Use this knob to select the
desired drying cycle. Two
options are available:
A - Based on time:
From 40 minutes to 150.
B - Based on the damp level of
the dry clothes:
Iron :slightly damp clothes,
easy to iron.
Wardrobe : dry clothes to
put away.
Extra dry : very dry clothes,
recommended for towelling and
bathrobes.
A cooling stage is foreseen at
the end of the drying cycle.
Detergent dispenser
It is divided into 3 compartments:
1. Detergent for pre-wash;
2. Detergent for the main cycle
wash;
3. Fabric conditioner.
3  Instructions for installation and use
On-off
When button H is pressed, the
washer-dryer is switched on,
when it is not the machine is
switched off.
Turning the appliance off
does not cancel the selected
programme.
On-off lamp / door locked
Lamp I flashes slowly when the
appliance is switched on and
awaiting instructions and at the
end of a cycle, indicating that the
door can be opened. It flashes
quickly when the door should
not be opened. A steady light
means the appliance has
accepted the selected
programme.
Drying cycle lamp
When this lamp is on, it means
that knob C has been set on a
drying cycle and at the end of the
wash cycle, the appliance will run
the selected tumble drying cycle.
The detergent dispenser with the
additional  bleach compartment
is here.
M
A
X
1
2 4
3 
						

							Type of fabric and degree of soil Programme
knobTe m p e r a t u r e
knobDetergent
for washFabric
softenerStain rem.
button/
BleachLength of
the cycle
(minutes)Description of wash cycle
COTTON
Exceptionally soiled whites
(sheets, tablecloths, etc.)
1 90°C
uu165Warm prewash, wash cycle at 90°C, rinse
cycles, intermediate and final spin cycles
Exceptionally soiled whites
(sheets, tablecloths, etc.)
2 90°C
uuDel./Trad.145Wash cycle at 90°C, rinse cycles,
intermediate and final spin cycles
Heavily soiled whites and fast colours
3 60°C
uuDel./Trad.130Wash cycle at 60°C, rinse cycles,
intermediate and final spin cycles
Slightly soiled whites and delicate
colours (shirts, jumpers, etc.)
4 40°C
uuDel./Trad.95Wash cycle at 40°C, rinse cycles,
intermediate and final spin cycles
Rinse cycles/bleach
uDel./Trad.Rinse cycles, intermediate and final
spin cycles
Spin cycleDraining and final spin cycle
Drying cycle for cotton fabrics
Stop/Reset
Interrupts/Cancels the selected programme
SYNTHETICS
Heavily soiled fast colour synthetics
(baby linen, etc.)
5 60°C
uuDelicate100Wash cycle at 60°C, rinse cycles,
anti-crease or delicate spin cycle
Heavily soiled fast colour synthetics
(baby linen, etc.)
6 50°C
uuDelicate95Wash cycle at 50°C, rinse cycles,
anti-crease or delicate spin cycle
Delicate colour synthetics
(all types of slightly soiled garments)
7 40°C
uuDelicate70Wash cycle at 40°C, rinse cycles,
anti-crease or delicate spin cycle
Delicate colour synthetics
(all types of slightly soiled garments
)
8 30°C
uu30Wash cycle at 30°C, rinse cycles  and
delicate spin cycle
Rinse cycles/bleach
uDelicateRinse cycles, anti-crease or delicate
spin cycel
Fabric softener
uRinse cycles with automatic introduction of
softener, anti-crease or delicate spin cycle
Spin cycleDraining and delicate spin cycle
Drying cycle for synthetic fabrics
Stop/Reset
Interrupts/Cancels the selected programme
DELICATES
Wool, hand wash
9 40°C
uu60Wash cycle at 40°C, rinse cycles and
delicate spin cycle
Particularly delicate garments and
fabrics (curtains, silk, viscose, etc.)
10 30°C
uu50Wash cycle at 30°C, rinse cycles,
anti-crease or draining
Rinse cycles
uRinse cyclesi, anti-crease or draining
Spin cycleDraining and delicate spin cycle
DrainingDraining
Stop/Reset
Interrupts/Cancels the selected programme
A programme for all seasons
What are you washing today?
Instructions for installation and use  4
Daily wash Your washer-dryer has a programme available for the washing of lightly soiled garments in a short amount of time.
By setting programme 8 at a temperature of 30°C, you can wash different types of fabrics together (except for wool and silk), with a
maximum load of 3 kg. This programmes allows you to save on both time and energy as it only lasts around 30 minutes.
WE RECOMMEND THE USE LIQUID DETERGENT.
Important: to cancel the wash programme you have just set, select one of the symbols  (Stop/Reset) and wait for at least 5 seconds.
Special programme
The data found in the table is purely indicative, and can vary according to the quantity and type of washing, the water system temperature and
the room temperature. 
						

							Fa bric
typeLoad type Max. load
(kg)
Extra
dryWardrobe Iron
Cotton,
Li ne nCl o thi ng o f
di ffer ent
sizes4 155 140 130
Cotton Terry
towels4 155 140 130
Te r i ta l ,
CottonSheets,
Shirts2,5 110 100 90
Acrylics Pyjamas,
socks, etc.1 656060
Nylon Slips, tights,
s toc ki ngs ,
etc.1 656060
5  Instructions for installation and use
How to dry
A combined Washing and
Drying Programme
Look at table A to the side and
follow the instructions provided
for MAX load to have an
automatic washing and drying
cycle.
Follow the instructions for wash
only (see page 2, the paragraph
entitled Starting the Washer-
Dryer) and use knob C to set
the type of drying cycle desired,
then press button H (I position).
If the laundry load to be washed
and dried exceeds the
maximum load foreseen (see
table A), then follow the
instructions provided for wash
only (see page 2, the paragraph
entitled Starting the Washer-
Dryer).
When the wash cycle has
finished, remove your washing,
divide it up and replace part of it
inside the drum.
Now follow the instructions
provided for a dry only cycle.
Repeat this procedure for the
remainder of the load.
Dry only
Once you have loaded the
washing that needs drying (4 kg
max. for cottons, see table for
other fabrics ), make sure that:
- the door is shut correctly;
- the plug is inserted in the socket;
- the water tap is turned on;
- button H has not been pressed
(O position).
And now set the wash cycle
knob
Set knob A on the appropriate
drying setting 
 depending on
the type of fabric, select the type
of drying cycle required using
knob C and then press on-off
button H (I position).
At the end of the drying cycle...
Wait for lamp I to flash slowly,
then turn the washer-dryer off by
pressing on-off button H
(O position). Now you can open
the appliance door. Once you
have removed the washing from
the appliance, leave the door
open or ajar to avoid the
formation of bad odours and
turn off the water tap.
A.
- During the drying phase, the door tends to get quite hot.
- Do not use the appliance to dry clothes that have been
washed with flammable solvents (e.g. trichlorethylene).
- Do not use the appliance to dry foam rubber or similar
elastomers.
- Make sure that the water tap is turned on during the drying
cycles.
- This washer-dryer can only be used to dry clothes which
have been pre-washed in water.
WARNINGA spin cycle is carried out during the drying if you have set a
cotton programme and a level of dryness (Extra dry 
,
Wardrobe 
, Iron ).
IMPORTANT
Drying time (Min.)
The data contained in the table are purely indicative.
For cotton loads of less than 1 Kg, use the drying programme
designed for synthetic fabrics. 
						

							Wash Bleaching Ironing Dry cleaning Drying
Strong
actionDelicate
actionHigh
Temp.Low
Temperat.
Wash at
95°CBleaching only in
cold waterHot iron at max
200°CDry clean with any
solvent Machine dryable
Wash at
60°C Do not bleachMedium hot
ironing at
max 150°CDry clean only with
perchloride, benzine
av., pure  alcohol,
R111 and R113Do not machine
dry
Wash at
40°CIron at max
110°CDry clean with av.
benzine, pure alcohol
and R113 Spread to dry
Wash at
30°C Not ironable Do not dry cleanHang to dry
without spin
drying
Hand washDry on clothes
hanger
Not
washable in
water
Understanding labels
Learn the meaning of these symbols and you will get better
results, your garments will last longer resulting in an
improved wash.
All over Europe, garment labels
contain messages expressed in
small yet important symbols.
Understanding them is very
important if you want to get
better results and treat your
garments the way they deserve
to be treated.These symbols are divided in
five different categories and
shapes: washing 
, bleaching
, ironing , dry cleaning 
and drying .
Consult and learn the symbols in this table: they will help you
obtain a better wash, treat your clothes properly, and get a
better performance out of your washer-dryer.
Useful tips
Turn shirts inside out to get better results
and make them last longer.
Always empty pockets of their contents.
Look at the label: it will always give you useful
advice.
When loading your washing, try to have a mixture
of large to small items.
Make sure you select  the right
temperature!
Instructions for installation and use  6
lcA
P
F 
						

							Useful tips
 Never use your washer-
dryer to wash... torn, fraying or
non-hemmed linen. If it is
absolutely neccessary, place it in
a bag for protection. Do not wash
coloured linen with whites.
 Watch the weight!
For best results, do not exceed
the weight limits stated below
(figures show weight of dry
garments):
- Resistant fabrics:
5,5 kg maximum
- Synthetic fabrics:
2.5 kg maximum
- Delicate fabrics:
2 kg maximum
- Pure new wool:
1 kg maximum
How to wash almost anything
 Curtains.
Curtains tend to crease a great
deal. A useful tip to reduce
creasing: fold the curtains and
place them in a pillow case or
mesh bag. Do not load anything
else inside the appliance, this
will ensure that the overall
weight does not exceed the half
load. Remember to use the
specific programme 10 which
automatically excludes the spin
cycle. Trainers.
Once you have removed mud
and dirt from trainers, you can
even wash them with jeans or
any other tough garments. Do
not wash trainers with whites. Quilted coats and anorak.
You can wash quilted coats and
wind-cheaters, too, if they are
padded with goose or duck
down. Do not load more than
2-3 kg and never load 5,5 kg.
Repeat rinse once or twice
using the gentle spin.
 How much does it weigh?
1 sheet 400-500 gr.
1 pillow case 150-200 gr.
1 tablecloth 400-500 gr.
1 bathrobe 900-1,200 gr.
1 towel 150-250 gr.
 Coloured T-shirts, printed
ones and shirts last longer if  turned
inside out before washing.
Printed T-shirts and sweatshirts
should always be ironed inside out.
 Dungaree  alert.
Very popular “salopette” type
overalls have straps with hooks
that can damage the drum of your
washer-dryer or other garments
during the wash. To minimise the
risk, place hooks in the pocket
and fasten with safety pins.
 Holidays: unplug the
appliance.
It is recommended that you
should unplug the machine from
the socket and turn off the water
supply. Leave the door ajar to
allow air circulation to the draw
and the door gasket area. This will
prevent unpleasant odours.
7  Instructions for installation and use
For best results, we
recommend you use a
specific detergent, taking
care not to wash more than
1 kg of laundry.
WOOL CYCLE 
						

							You must follow the dosage
recommendations provided by
the manufacturers when adding
detergent or fabric conditioner.
Doses will vary according to the
wash load, the water hardness
and how soiled the washing is.
Experience will help you select
the right dosage almost
automatically: it will become your
secret.
Before adding detergent for pre-
washing in compartment 1,
make sure that the extra
compartment for bleach 4 has
not been inserted.
Ensure no overfilling when
adding fabric conditioner in
compartment 3.
The washer-dryer automatically
adds the softener to the wash in
each programme.
Liquid detergent is poured into
compartment 2 just a few
seconds before starting the
wash cycle.
In compartment 1:
Detergent for pre-washing (powder)
In compartment 2:
Detergent for washing
(powder or liquid)
In compartment 3:
Additives (softeners, perfumes, etc.)
In compartment 4:
Bleach and delicate bleach.
Useful tips about the detergent dispenser
It’s important for a good wash
The first secret is the easiest: the detergent dispenser is
opened by pull it outwards.
Remember that liquid detergent
is only designed for wash
cycles of up to 60 degrees on
non pre-wash items.
Special containers are sold with
liquid or powder detergents for
placing inside the washer-dryer
drum, these are positioned
according to the instructions
found in the detergent box
Never use hand wash
detergent, because it may form
too much foam, which could
damage the washer-dryer.
Detergents that are specifically
formulated for both hand and
machine wash are an
exception.
One last secret: when washing
with cold water, always reduce
the amount of detergent you use:
it dissolves less easily in cold
water than in hot water, so part
of it would be wasted.
Cutting costs efficientlyA guide to environmentally
friendly and economic use
of your appliance.
MAXIMISE THE LOAD SIZE
Achieve the best use of energy, water, detergent and time by using the recommended
maximum load size.
SAVE up to 50% energy by washing a full load instead of 2 half loads.
DO YOU NEED TO PRE-WASH?
For heavily soiled laundry only!
SAVE detergent, time, water and between 5 to 15% energy consumption by NOT
selecting Prewash for slight to normally soiled laundry.
IS A HOT WASH REQUIRED?
Pretreat stains with stain remover or soak dried in stains in water before washing to
reduce the necessity of a hot wash programme.
SAVE up to 50% energy by using a 60°C wash programme.
BEFORE USING A  DRYING PROGRAMME ...
SAVE energy and time by selecting the highest suitable spin speed to reduce the water
content in laundry before using a drying programme.
The detergent dispenser  can be
removed and cleaned: pull it outwards,
as indicated in the figure. Then leave it
under running water for a few  minutes.
Instructions for installation and use  8
Bleach cycle and stain removal
button
If bleaching is necessary, the
extra case 4 (provided) must be
inserted into compartment 1 of
the detergent dispenser.
When pouring in the bleach, be
careful not to exceed the max
level indicated on the central
pivot (see illustration).
The use of the additional bleach
container excludes the
possibility of using the pre-wash
cycle. Traditional bleach can
only be used on sturdy white
fabrics, whereas delicate
bleach can be used for
coloured fabrics, synthetics
and for wool.You cannot bleach with the
“Silk” programme and with the
“special programmes” (see
page 4).
Use the stain removal button
every time you want to bleach.
Should you want to do it
separately you must pour the
bleach into the additional
container 4, press button G
(stain removal), start the
washer-dryer, then select one of
the symbols 
 according to
the type of fabric.
When you bleach during a
normal wash cycle, pour the
detergent and any additives in
the special compartments,
press button G (stain removal),
set the programme you desire
and turn the washer-dryer on.
M
A
X
1
2 4
3
1
2
M
A
X
M
A
X 
						

							The washer-dryer fails to
fill with water.
Is the hose correctly
connected to the tap?
Is there a water shortage ?
There could be work in
progress in your building or
street.
Is there sufficient water
pressure? The autoclave
may be malfunctioning.
Is the tap filter clean? If the
water is very calcareous, or
if work has recently been
carried out on the water
piping, the tap filter could be
clogged with par ticles and
debris.
Is the rubber hose kinked?
The tract of the rubber hose
bringing water to washer-
dryer must be as straight as
possible. Make sure it is not
squashed or kinked.
The programme selector
knob keeps turning?
Wait a few minutes for the
drain pump to empty the
tub, switch the washer-dryer
off, select one of the symbols
stop/reset 
, then switch it
back on. If the knob continues
to turn, call for assistance
because it is showing an
anomaly.
The washer-dryer
continuously fills and
drains water.
Is the drain hose positioned
too low? It must be installed
at a height ranging from 60 to
100 cm.
 Is the end of the hose
immersed in water?
 Does the wall drainage
system have a breather
pipe? If the problem persists
even after these checks, turn
the water supply off the
machine and call for
assistance.
If you live on an upper floor of
your building, there may be a
problem with your drain trap.
To solve this problem, a
special valve must be
installed.
Before calling, read the following
Troubleshooting
In most cases, when your washer-dryer fails to work, the problems arising can
be easily solved without  having to call for a technician. Before calling for
assistance, always check these points.
The washer-dryer fails to
start.
Is the plug correctly inserted
into the socket? It could have
been moved whilst cleaning.
Is there electricity in the
house?
A circuit breaker may have
switched off as a result of too
many electrical appliances
working at the same time. Or
maybe due to a general failure
in your entire area.
Is the washer-dryer door
closed properly?
For safety reasons, the
washer-dryer cannot work ifthe door is open or not shut
properly.
Is the On/Off button
pressed?
If it is, then a programmed start
has been set.
Is the programmed start
knob, in the correct position
for those models
concerned?
Is the water supply turned
on? For safety reasons, if the
washer-dryer does not load
water, it cannot start a wash
cycle.
RIGHT      WRONG
Turn off the water
supply after use.
This will eliminate
the possibility of
leakage.
Always leave the
appliance door ajar
to avoid bad odours.
Clean the
appliance’s
exteriors gently.
To clean the
exteriors and the
rubber parts of the
appliance, always
use a soft cloth
dipped in warm and
soapy water.Leave the washer-dryer
plugged in while
cleaning.
Even during maintenance,
the appliance should
always be unplugged.
Use solvents and
aggressive abrasives.
Never use solvents or
abrasives to clean the
external and rubber parts
of the washer-dryer.
Neglect the detergent
dispenser.
It is removable and can
easily be cleaned by
leaving it under running
water.
Go on holiday without
thinking about her.
Before leaving, always
make sure that the
washer-dryer is
unplugged and that the
water supply is turned off.
9  Instructions for installation and use
Simple: with the new Indesit technology,  you need less than
half of it, to get good results on twice as much!
This is why you cannot see the water through the door:
because there is little, very little of it, to respect the
environment yet without renouncing maximum cleanliness.
And, on top of that, you are also saving electricity.
But where did all the water go?