InFocus Projector IN1124 User Manual

Copyright  
This publication, including all photographs, illustrations and software, is protected under international copy-
right laws, with all rights reserved. Neither this man ual, nor any of the material contained herein, may be 
reproduced without written consent of the author. 
© Copyright 2011 
Disclaimer 
The information in this document is subject to change without notice. The manufacturer makes no repre-
sentations or warranties with respect to the cont ents hereof and specifically disclaims...

User’s Manual 
— ii — 
Important Safety Information 
Important: 
It is strongly recommended that you read this sect ion carefully before using the projector. These 
safety and usage instructions will ensure that you enj oy many years of safe use of the projector. 
Keep this manual for future reference. 
Symbols Used 
Warning symbols are used on the unit and in this ma nual to alert you of hazardous situations.  
The following styles are used in this manual to alert you to important information. 
Note:...

 
 
  Preface 
Projector Installation Notice 
¾
  Place the projector in a horizontal position 
The tilt angle of the projector should not exceed 15  degrees, nor should the projector be installed in 
any way other than the desktop and ceiling mount, otherwise lamp life could decrease dramatically. 
     
¾   Allow at least 50 cm (19.69 inch) clearance around the exhaust vent. 
  
 
  
 
 
(19.69 inch)(19.69 inch)(19.69 inch) 
(3.94 inch) 
(11.81 inch)(19.69 inch) 
¾   Ensure that the intake vents do...

User’s Manual 
Replacing the Lamp 
Replacing the lamp can be hazardous if done incorrectly. See Replacing the Projection Lamp on page 32 
for clear and safe instructions for this procedure. Before replacing the lamp: 
¾   Unplug the power cord. 
¾  Allow the lamp to cool for about one hour. 
Cleaning the Projector 
¾  Unplug the power cord before cleaning. See Cleaning the Projector on page 34 
¾   Allow the lamp to cool for about one hour. 
Regulatory Warnings 
Before installing and using the...

 
 
  Preface 
–
 v  – 
Table of Contents 
GETTING STARTED ........................................................................\
................................................................................... 1 
PACKING CHECKLIST........................................................................\
.....................................................................1 
VIEWS OF PROJECTOR PARTS........................................................................\...

User’s Manual 
— vi — 
SPECIFICATIONS ........................................................................\
..................................................................................... 41 
SPECIFICATIONS........................................................................\
....................................................... ...................41 
PROJECTION DISTANCE VS. PROJECTION SIZE........................................................................\...

IN1124/IN1126 – User’s Manual 
– 1 –  
GETTING STARTED 
Packing Checklist 
Carefully unpack the projector and che ck that the following items are included:   
 
DLP PROJECTOR   
Vol u
me
Free
ze
So urceKe
ysto n
e
Menu Power
Auto B
la
nk
 
  
REMOTE CONTROL 
(BATTERY NOT INCLUDED) 
CD-ROM 
(T
HIS USER’S MANUAL) VGA CABLE 
   
POWER CORD 
(
VARIES PER COUNTRY) 
SSFETY/WARRANTY  
BOOKLET QUICK START GUIDE 
  
Contact your dealer immediately if any items are mi ssing, appear damaged, or if the unit does...

User’s Manual 
Views of Projector Parts  
Front-angled View 
12356
7 984 
ITEM LABEL DESCRIPTION SEE PAGE: 
1.  Ventilation opening Do not block this vent. Blocking the vent can cause the projector to 
overheat 
2.  Elevator foot button Push to
 release the elevator foot 
3.  Elevator foot Adjusts  the height  of projector 
13
4.  Lens cap Used to protect the lens  when the projector is not in use 
5.  IR receiver Receives the IR signals from the remote control 6
6.  Lens Projection Lens 
7.  Focus ring...

IN1124/IN1126 – User’s Manual 
Top view—Keypad buttons  
 
123456
Power
Power
Ready
Over Temp
Source Quick Menu
Auto
Menu
7
89
 
ITEM LABEL DESCRIPTION SEE PAGE: 
1.   (Power) Turns the projector 
on and off 
2.  ▲ (Up cursor) Navigates through the OSD menu 16
Green  Power On  
– 3 –  
Off  Power Off (AC Off) 3.  Power LED 
Flashing Error code  (see LED Error Messages on page  ) 37
On System over temperature 4.  Over Temp LED Off Normal State 
Orange Lamp is ready to be powered-on. 
5.  Ready LED Lamp...