InFocus Projector IN1124 User Manual

User’s Manual 
Video/Audio Menu  
Press the MENU button to open the  OSD menu. Press the cursor  ◄► button to move to the  
Video/Audio  menu. Press the cursor  ▲▼ button to move up and down in the  Video/Audio menu. 
Press  ◄► to change setting values. 
 
ITEM DESCRIPTION 
Press the  ◄► buttons to enable or disable the Automatic Gain Control for video 
source. Video AGC 
Video Saturation Press the  ◄► buttons to adjust the video saturation. 
Video Tint Press the  ◄► buttons to adjust the video...

IN1124/IN1126 – User’s Manual 
Audio 
 (Enter) / ► to enter the  Audio sub menu. Press 
 
ITEM DESCRIPTION 
Volume Press the ◄►  buttons to adjust the audio volume.  
Mute Press  the ◄►  buttons to turn the speaker on or off. 
 
   – 25  –  

User’s Manual 
 Installation I Menu  
Press the MENU button to open the  OSD menu. Press the cursor  ◄► button to move to the  Installa-
tion I  menu. Press the cursor  ▲▼ button to move up and down in the  Installation I menu. Press 
◄►  to change setting values. 
 
 
ITEM DESCRIPTION 
Press the cursor  ◄► buttons to select a different localized menu. 
(Range: English/ Français/ Español/ Deutsch/ Português/  簡体中文/ 繁體中文/ Italiano/ 
Svenska/ Nederlands/ Suomi/  Dansk/ Norsk/ Polski/ 한국어/ Türkçe/...

IN1124/IN1126 – User’s Manual 
Advanced 
 (Enter) / ► to enter the  Advanced sub menu. Press 
 
ITEM DESCRIPTION 
Security Lock  Press the cursor  ◄► button to enable or disable the security lock function. 
Keypad Lock Press the cursor  ◄► button to enable or disable the keypad lock function. 
When displaying the image against a wall, press the cursor ◄► button to select dif-
ferent wall color settings. This will help compensate for color variations caused by the 
wall surface.  
Wall Color 
Press...

User’s Manual 
Installation II Menu  
Press the MENU button to open the  OSD menu. Press the cursor  ◄► button to move to the  Installa-
tion II  menu. Press the cursor  ▲▼ button to move up and down in the Installation II menu.  
 
ITEM DESCRIPTION 
Auto Source Press the cursor  ◄► button to enable or disable automatic source detection.  
Auto Power Off 
(min.) Press the cursor  ◄► button to enable or disable automatic shutdown of lamp when 
no signal.  
Press the cursor  ◄► button to enable or disable...

IN1124/IN1126 – User’s Manual 
Advanced Features 
Press the Menu button to open the OSD menu. Press  ◄► to move to the  Installation II menu. 
Press  ▲▼ to move to the  Advanced menu and then press  Enter or ►. Press  ▲▼ to move up and 
down in the  Advanced menu. Press  ◄► to change setting values. 
 
ITEM DESCRIPTION 
Press Enter /  ► to enter the OSD setting menu. See page 30 for more information on OSD Menu Setting OSD Menu Setting. 
Press Enter/  ► to enter the Peripheral Test menu. See page 30 for...

User’s Manual 
OSD Menu Setting  
 
ITEM DESCRIPTION 
Menu Position Press ◄► button to move the OSD menu position. 
Translucent Menu Press ◄►  button to adjust the OSD opacity.  
Menu Display Press ◄► button to select the OSD timeout delay. 
 
Peripheral Test 
 
ITEM DESCRIPTION 
Remote Control 
Test  (Enter) /  ► to test the IR remote control for diagnostic testing.  Press 
Color Test Press  (Enter) / ►  to display colored test patterns. 
Button Test Press  (Enter) / ► to test the keypad buttons. 
USB...

IN1124/IN1126 – User’s Manual 
Lamp Hour Reset 
 
Please refer to  on page 32 to reset the lamp hour counter. Replacing the Projection Lamp
Press ▼▲◄►  buttons to reset the lamp hour 
 
Status 
Press the cursor ▲▼  button to move up and down in the  Installation II menu. Select the   
Installation II sub menu and press 
 (Enter) /  ► to enter the  Status sub menu.
 
 
ITEM DESCRIPTION 
Active Source Displays the active source. 
Displays resolution/video information for RGB source and color standard for...

User’s Manual 
 
MAINTENANCE AND SECURITY 
Replacing the Projection Lamp 
Be sure to use the InFocus lamp module designed for this projector. You can order new lamps from 
www.infocusstore.com (in select areas), your retaile r or your dealer. Only genuine InFocus lamps are 
tested for use in this projector.  Use of non InFocus lamps may caus e electrical shock and fire, and may 
void the projector warranty. InFocus is not liable for  the performance, safety or certification of any other 
lamps....

IN1124/IN1126 – User’s Manual 
3.  Remove the two screws 
from the lamp module (A). 
4.  Lift the module handle up 
(B). 
 
5.  Pull firmly on the module 
handle to remove the lamp 
module. 
 
6.  Reverse steps 1 to 5 to 
install the new lamp 
module.  
While installing, align the 
lamp module with the 
connector and ensure it is 
level to avoid damage. 
Note:  
The lamp module must sit 
securely in place and the 
lamp connector must be 
connected properly before 
tightening the screws.  
7.  Turn on...