JBL Sb 2 Manual
Have a look at the manual JBL Sb 2 Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 57 JBL manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
![Page 6
The exact configuration of a subwoofer/satellite loudspeaker system depends on a number of factors, such\
as:• How large the room is and how many satellite speakers it will take to cover the room?
• Whether the distance between the satellite speakers allows a single subwoofer to cover the entire space?
• Whether the program material is light background music or dominant driving music?
• Where the subwoofer will be located in relation to room boundaries (wall, ceiling, corners)?
The system...](http://img.usermanuals.tech/thumb/2629/102242/w64_sb-2-manual-1510679941_d-5.png "Page 6
The exact configuration of a subwoofer/satellite loudspeaker system depends on a number of factors, such\
as:• How large the room is and how many satellite speakers it will take to cover the room?
• Whether the distance between the satellite speakers allows a single subwoofer to cover the entire space?
• Whether the program material is light background music or dominant driving music?
• Where the subwoofer will be located in relation to room boundaries (wall, ceiling, corners)?
The system...")
SatelliteOutputs
LeftRight
System #2 in Stereo
SPL (at 20 Feet): 91 dB Continuous (peaks of 101 dB)
FromPower Amp
Left
Right
MODULE SETTINGS:Stereo / Mono Selector: Stereo4-Ohm / 8-Ohm Selector: 8-Ohms
InputTerminals
Control SB-210 withMTC-210-SAT Crossover Input Module
Control 25AV (8 ohm setting)Control 25AV (8 ohm setting)
SatelliteOutputs
LeftRight
System #2 on 70V/100V Distributed Line
SPL (at 20 feet): At 250W Tap: 86 dB Continuous (96 dB peak) At 125W Tap: 83 dB Continuous (93 dB peak) At 78W Tap: 80 dB Continuous (90 dB peak)
From70V or 100V Power Amp
Left/Mono
InputTerminals
Control SB-210 with
MTC-210T-SAT Crossover Input Module
MODULE SETTINGS:Stereo / Mono Selector: Mono4-Ohm / 8-Ohm Selector: 8-Ohms
Stereo System Connection Note
Ensure that the polarity hookup of the left and right inputs is correct. If one of the inputs is connected backwards (out of polarity), the sub-woofer will not produce much (if any) bass.
89
System #3
2 pcs Control 28 & Control SB-210
Application: Medium volume ambient music in small
spaces where two satellite speakers are enough to cover the area.
Max Continuous Average SPL (at 20 feet): 95 dB (with
peaks of 105 dB)
Max Output Balance -- The subwoofer has higher
maximum output capability than the satellite speakers, so this
system has the capability of being utilized for applications
where the bass will be EQ’d substantially higher than the
mids and highs. The system also works fine for flat-response
applications.
4 Ohm / 8 Ohm Setting: 8 Ohms
Stereo/Mono Capability: Either setting can be utilized
Connection:
Mono Operation – Connect input to the LEFT input
terminal. Put Stereo/Mono header into MONO position.
Connect 1 pc of Control 28 to each satellite output (LEFT
and RIGHT). Do NOT connect both satellite speakers to
a single satellite output.
Stereo Operation – Connect left and right inputs to the
LEFT and RIGHT input terminals. Put Stereo/Mono
header into STEREO position. Connect 1 pc of Control
28 to each of the Satellite Outputs (LEFT and RIGHT)
Connection Diagrams
SatelliteOutputs
LeftRight
System #3 in Mono
SPL (at 20 Feet): 95 dB Continuous (peaks of 105 dB)
FromPower Amp
Left/Mono
SUBWOOFER:Control SB-210 &MTC-210-SAT Crossover Input Module
MODULE SETTINGS:Stereo / Mono Selector: Mono4-Ohm / 8-Ohm Selector: 8-Ohms InputTerminals
Control 28Control 28
Control SB-210 withMTC-210-SAT Crossover Input Module
1011
SatelliteOutputs
LeftRight
System #3 in Stereo
SPL (at 20 Feet): 95 dB Continuous (peaks of 105 dB)
SUBWOOFER:Control SB-210 &MTC-210-SAT Crossover Input Module
MODULE SETTINGS:Stereo / Mono Selector: Stereo4-Ohm / 8-Ohm Selector: 8-Ohms
Control 28Control 28
Control SB-210 withMTC-210-SAT Crossover Input Module
FromPower Amp
Left
Right
InputTerminals
SatelliteOutputs
LeftRight
System #3 on 70V/100V Distributed Line
SPL (at 20 feet, by tap seetting on SB210): At 250W Tap: 90 dB Continuous (100 dB peak) At 125W Tap: 87 dB Continuous (97 dB peak) At 78W Tap: 84 dB Continuous (94 dB peak)
From70V or 100V Power Amp
Left/Mono
InputTerminals
Control SB-210 with
MTC-210T-SAT Crossover Input Module
MODULE SETTINGS:Stereo / Mono Selector: Mono4-Ohm / 8-Ohm Selector: 8-Ohms
Control 28(NOT Control 28T-60) Control 28(NOT Control 28T-60)
Stereo System Connection Note
Ensure that the polarity hookup of the left and right inputs is correct. If one of the inputs is connected backwards (out of polarity), the sub-woofer will not produce much (if any) bass.
1011
SatelliteOutputs
LeftRight
System #4 in Mono
SPL (at 20 Feet): 96 dB Continuous (peaks of 106 dB)
FromPower Amp
Left/Mono
SUBWOOFER:Control SB-210 &MTC-210-SAT Crossover Input Module
MODULE SETTINGS:Stereo / Mono Selector: Mono4-Ohm / 8-Ohm Selector: 8-Ohms InputTerminals
Control SB-210 withMTC-210-SAT Crossover Input Module
Control 29AV-1 (8 Ohm Setting)Control 29AV-1 (8 Ohm Setting)
System #4
2 pcs Control 29AV & Control SB-210
Application
High volume, high-fidelity music reproduction in small spaces
where two satellite speakers are enough to cover the area.
Max Continuous Average SPL (at 20 feet)
96 dB (with peaks of 106 dB)
4 Ohm / 8 Ohm Setting
8 Ohms
Stereo/Mono Capability
Either setting can be utilized
Connection
Mono Operation – Connect input to the LEFT input
terminal. Put Stereo/Mono header into MONO position.
Connect 1 pc of Control 28 to each satellite output (LEFT
and RIGHT). Do NOT connect both satellite speakers to
a single satellite output.
Stereo Operation – Connect left and right inputs to the
LEFT and RIGHT input terminals. Put Stereo/Mono
header into STEREO position. Connect 1 pc of Control
28 to each of the Satellite Outputs (LEFT and RIGHT)
Application Note
The Control 29AV-1 has the highest sensitivity (sound output
per watt of input) of any of the satellite speakers in this guide,
resulting in the bass from the subwoofer being lower, in relative
sense, than some of the other sub/sat systems. For more
dominant bass, additional subwoofer sensitivity can be attained
by corner-loading the subwoofer (see “Sensitivity Balance”
section, above). Alternatively, the subwoofer/satellite sensitivity
balance can be altered with an in-line active equalizer.
Connection Diagrams
1213
SatelliteOutputs
LeftRight
System #4 in Stereo
SPL (at 20 Feet): 96 dB Continuous (peaks of 106 dB)
FromPower Amp
Left
Right
MODULE SETTINGS:Stereo / Mono Selector: Stereo4-Ohm / 8-Ohm Selector: 8-Ohms
InputTerminals
Control SB-210 withMTC-210-SAT Crossover Input Module
Control 29AV-1 (8 Ohm Setting)Control 29AV-1 (8 Ohm Setting)
SatelliteOutputs
LeftRight
SPL (at 20 feet, by tap seetting on SB210): At 250W Tap: 91 dB Continuous (101 dB peak) At 125W Tap: 88 dB Continuous (98 dB peak) At 78W Tap: 85 dB Continuous (95 dB peak)
From70V or 100V Power Amp
Left/Mono
InputTerminals
Control SB-210 with
MTC-210T-SAT Crossover Input Module
MODULE SETTINGS:Stereo / Mono Selector: Mono4-Ohm / 8-Ohm Selector: 8-Ohms
Control 29AV(set to 8 ohms) Control 29AV(set to 8 ohms)
System #4 on 70V/100V Distributed Line
Stereo System Connection Note
Ensure that the polarity hookup of the left and right inputs is correct. If one of the inputs is connected backwards (out of polarity), the sub-woofer will not produce much (if any) bass.
1213
SatelliteOutputs
LeftRight
System #5 in Mono
SPL (at 20 Feet): 94 dB Continuous (peaks of 104 dB)
MODULE SETTINGS:Stereo / Mono Selector: Mono4-Ohm / 8-Ohm Selector: 4-Ohms
Control SB-210 withMTC-210-SAT Crossover Input Module
Control 25AV (8 ohm setting)Control 25AV (8 ohm setting)Control 25AV (8 ohm setting)Control 25AV (8 ohm setting)
FromPower Amp
Left/Mono
InputTerminals
System #5
4 pcs Control 25AV & Control SB-210
Application
Medium volume, high-fidelity music reproduction where 4
satellite speakers are needed to cover the area.
Max Continuous Average SPL (at 20 feet)
94 dB (with peaks of 104 dB)
Max Output Balance
The subwoofer has higher maximum output capability than
the satellite speakers and the output capability can be further
boosted by placing the subwoofer at a boundary junction or
corner. This system has the capability of being utilized for
applications where the bass will be EQ’d substantially higher
than the mids and highs. The system also works fine for flat-
response applications.
4 Ohm / 8 Ohm Setting
4 Ohms
Stereo/Mono Capability
Either setting can be utilized
Connection
Mono Operation – Connect input to the LEFT input termi-
nal. Put Stereo/Mono header into MONO position. Con-
nect 2 pcs of Control 25AV to each satellite output (LEFT
and RIGHT). Do NOT connect all 4 satellite speakers to
a single satellite output.
Stereo Operation – Connect left and right inputs to the
LEFT and RIGHT input terminals. Put Stereo/Mono
header into STEREO position. Connect 2 pcs of Control
25AV to each of the Satellite Outputs (LEFT and RIGHT)
Application Notes
Balance -- The subwoofer has higher maximum output
capability than the satellite speakers and the output
capability can be further boosted by placing the subwoofer
at a boundary junction or corner. This system has the
capability of being utilized for applications where the bass
will be EQ’d substantially higher than the mids and highs.
The system also works fine for flat-response applications.
Variations -- Control 25 speakers can be utilized instead of
Control 25AV for a more cost-effective system, resulting in
slightly lower overall fidelity, but 1 dB louder SPL.
Connection Diagrams
1415
SatelliteOutputs
System #5 on 70V/100V Distributed Line
SPL (at 20 feet, by tap setting on SB210): At 250W Tap: 94 dB Continuous (104 dB peak) At 125W Tap: 91 dB Continuous (101 dB peak) At 78W Tap: 88 dB Continuous (98 dB peak)
From70V or 100V Power Amp
Left/Mono
InputTerminals
Control SB-210 with
MTC-210T-SAT Crossover Input Module
MODULE SETTINGS:Stereo / Mono Selector: Mono4-Ohm / 8-Ohm Selector: 4-Ohms
LeftRightControl 25AV (8 ohm setting)Control 25AV (8 ohm setting)Control 25AV (8 ohm setting)Control 25AV (8 ohm setting)
SatelliteOutputs
LeftRight
System #5 in Stereo
SPL (at 20 Feet): 94 dB Continuous (peaks of 104 dB)
FromPower Amp
Left
Right
MODULE SETTINGS:Stereo / Mono Selector: Stereo4-Ohm / 8-Ohm Selector: 4-Ohms
InputTerminals
Control SB-210 withMTC-210-SAT Crossover Input Module
Control 25AV (8 ohm setting)Control 25AV (8 ohm setting)Control 25AV (8 ohm setting)Control 25AV (8 ohm setting)
Stereo System Connection Note
Ensure that the polarity hookup of the left and right inputs is correct. If one of the inputs is connected backwards (out of polarity), the sub-woofer will not produce much (if any) bass.
1415
SatelliteOutputs
LeftRight
System #6 in Mono
SPL (at 10 Feet): 96 dB Continuous (peaks of 106 dB)
FromPower Amp
Left/Mono
SUBWOOFER:Control SB-210 &MTC-210-SAT Crossover Input Module
MODULE SETTINGS:Stereo / Mono Selector: Mono4-Ohm / 8-Ohm Selector: 8-Ohms InputTerminals
Control SB-210 withMTC-210-SAT Crossover Input Module
Control 24C
Control 29AV-1 (8 Ohm Setting)
Control 24CControl 24CControl 24C
Systems with
IN-CEILING Satellite Speakers
Connection
Mono Operation – Connect input to the LEFT input termi-
nal. Put Stereo/Mono header into MONO position. Con-
nect 2 pcs of Control 24C to each satellite output (LEFT
and RIGHT). Do NOT connect all 4 satellite speakers to
a single satellite output.
Stereo Operation – Connect left and right inputs to the
LEFT and RIGHT input terminals. Put Stereo/Mono
header into STEREO position. Connect 2 pcs of Control
24C to each of the Satellite Outputs (LEFT and RIGHT)
In-ceiling loudspeakers can benefit from the addition of a subwoofer. Often that takes the form factor of an in-ceiling subwoofer like
Control 19CS or Control 312CS, but it may be desirable to use a subwoofer with a full passive crossover. For more information
about model selection, see the “Subwoofer Model Selection” and “Designing for Other JBL Subwoofer Models” sections, above.
The SB-210 with MTC-210-SAT module is a subwoofer that contains a built in passive crossover, which makes it easy to structure
subwoofer/satellite systems. With in-ceiling satellite speakers, the SB-210 can be mounted on a wall o\
r ceiling via the MTC-210U U-
bracket, suspended from the ceiling via built-in suspension points, or installed above an air grate grille in the ceiling.
System #6
4 pcs Control 24C with Control SB-210
Application: Medium volume, high-fidelity music
reproduction where 4 in-ceiling satellite speakers are needed
to cover the area.
Max Continuous Average SPL (at 10 feet): 96 dB
(with peaks of 106 dB).
4 Ohm / 8 Ohm Setting: 4 Ohms.
Stereo/Mono Capability: Either setting can be utilized
1617
SatelliteOutputs
System #6 on 70V/100V Distributed Line
From70V or 100V Power Amp
Left/Mono
InputTerminals
Control SB-210 with
MTC-210T-SAT Crossover Input Module
MODULE SETTINGS:Stereo / Mono Selector: Mono4-Ohm / 8-Ohm Selector: 8-Ohms
LeftRight
Control 24CControl 24CControl 24CControl 24C
SatelliteOutputs
System #6 in Stereo
SPL (at 10 Feet): 96 dB Continuous (peaks of 106 dB)
FromPower Amp
Left
Right
MODULE SETTINGS:Stereo / Mono Selector: Stereo4-Ohm / 8-Ohm Selector: 8-Ohms
InputTerminals
Control SB-210 withMTC-210-SAT Crossover Input Module
Control 29AV-1 (8 Ohm Setting)Control 29AV-1 (8 Ohm Setting)
LeftRight
Control 24CControl 24CControl 24CControl 24C
Stereo System Connection Note
Ensure that the polarity hookup of the left and right inputs is correct. If one of the inputs is connected backwards (out of polarity), the sub-woofer will not produce much (if any) bass.
1617
JBL Professional
8500 Balboa Boulevard, P.O. Box 2200
Northridge, California 91329 U.S.A.
A Harman International Company
© Copyright 2006 JBL Professional
CC Sub Sat
11/06