JVC GZ-EX555 User Manual

							.
8DETECT/MAIL detection standby
.
0Detection is suspended for the first 5 seconds.
9 DETECT/MAIL detection in progress (an e-mail is automatically sent out
after detection is completed)
.
0The “PHOTO” icon appears on the screen for about 2 seconds upon
detection.
0 Images are captured automatically when moving subjects or human
faces appear on the camera’s screen. (The PHOTO icon appears on the screen upon detection.)
0 The captured still images will be sent via e-mail to the selected
recipients.
10 Detection suspended
.
0Until the next detection is made, detection is suspended for the pre-
set length of time.
0 “DETECTION INTERVAL” can be selected from 15 seconds, 1
minute, 3 minutes, 10 minutes, 30 minutes and 60 minutes.
“Setting the Detection Interval of this Camera (DETECT/MAIL
SETTING)” ( A p. 150)
Check the incoming e-mail.
VIDEO MAIL
o Setting (Once setting is done, start from the “Regular
Operation” below)
Create a QR code.Memo : 
0 Perform operations in step 2 and 3 after creating a QR code, and read the
QR code one by one by the camera.
o Enter values in the required items for setting the recipient’s
e-mail address.
0 E-mail address: set the recipient’s e-mail address.
0 E-mail function: set the function of the e-mail that is transmitted to the
recipient’s e-mail address.
0 Up to 8 e-mail addresses can be set.
0 Start reading from (1) if multiple e-mail addresses are set. Click the number
or “”.
o Enter values in the required items for setting the sender’s
e-mail address.
0 E-mail address: set the sender’s e-mail address.
o Enter values in the required items for setting the e-mail
server (SMTP server).
0 SMTP server: set the name of the e-mail server (SMTP server) from which
an e-mail account is obtained.
0 SMTP port number: set according to the condition when the e-mail
account is obtained. Normally set to “25”.
0 SMTP authentication method: set according to the condition when the e-
mail account is obtained.
0 User name: set if the SMTP authentication method is set to other than
“None”. (same as the registered user name (account name) when the e-
mail account is obtained)
0 Password: set if the SMTP authentication method is set to other than
“None”. (same as the registered password when the e-mail account is
obtained)
Display the screen for reading the QR code.
1 Tap “MENU”.
(Operation on this camera)
.
0The top menu appears.
2 Tap the “Wi-Fi” ( Q
) icon.
(Operation on this camera)
.
3Tap  1 on the lower right of the screen.
(Operation on this camera)
Using Wi-Fi by Creating a QR Code (GZ-EX555/GZ-EX515)201 
						

							.
4Tap “COMMON Wi-Fi SETTING”.
(Operation on this camera)
.
5Tap “SET FROM QR CODE”.
.
6Tap “EXECUTE”.
.
Read a QR code.
1Read a QR code.
(Operation on this camera)
.
2Tap “YES”.
.
0Contents of the screen vary depending on the QR code that is read
by this unit.
3 Tap “OK”.
.
0Tap “NEXT” to return to the screen to read the QR code.
0 Set contents are saved.
Registering the access points (wireless LAN router) to this
unit
o Wi-Fi Protected Setup (WPS) Registration
1
Tap “MENU”.
(Operation on this camera)
.
0The top menu appears.
2 Tap the “Wi-Fi” ( Q
) icon.
(Operation on this camera)
.
3Tap  1 on the lower right of the screen.
(Operation on this camera)
.
4Tap “COMMON Wi-Fi SETTING”.
(Operation on this camera)
.
5Tap “ACCESS POINTS”.
(Operation on this camera)
Using Wi-Fi by Creating a QR Code (GZ-EX555/GZ-EX515)202 
						

							.
6Tap “ADD”.
(Operation on this camera)
.
7Tap “EZ REGISTRATION WPS”.
(Operation on this camera)
.
8Activate WPS of the access point (wireless LAN router) within 2 minutes.
0 To activate WPS, refer to the instruction manual of the device in use.
9 After registration is complete, tap “OK” on the camera’s screen.
(Operation on this camera)
.
oSearch the access point, and select from the list.
Set the name (SSID) of the access point (wireless LAN router) and the
password beforehand.
1 Tap “MENU”.
(Operation on this camera)
.
0The top menu appears.
2 Tap the “Wi-Fi” ( Q
) icon.
(Operation on this camera)
.
3 Tap  1 on the lower right of the screen.
(Operation on this camera)
.
4Tap “COMMON Wi-Fi SETTING”.
(Operation on this camera)
.
5Tap “ACCESS POINTS”.
(Operation on this camera)
.
6Tap “ADD”.
(Operation on this camera)
.
7Tap “SEARCH”.
(Operation on this camera)
.
0The search results appear on the camera’s screen.
8 Tap the name (SSID) of the desired access point from the list of search
results.
(Operation on this camera)
Using Wi-Fi by Creating a QR Code (GZ-EX555/GZ-EX515)203 
						

							.
9Register a password.
(Operation on this camera)
.
0Tap on the on-screen keyboard to enter characters. The character
changes with every tap.
“ABC”, for example, enter “A” by tapping once, “B” by tapping twice,
or “C” by tapping 3 times.
0 Tap “DELETE” to delete a character.
0 Tap “CANCEL” to exit.
0 Tap “A/a/1” to select character input type from upper case letter, lower
case letter, and number.
0 Tap  E or  F to move one space to the left or right.
0 The password is not required if the wireless LAN router is not security
protected.
10 After registration is complete, tap “OK” on the camera’s screen.
(Operation on this camera)
.
0Other methods, such as “Manual Registration” and “WPS PIN
Registration” are also available. Refer to the following link for details.
“Registering the Access Points of the Camera to Connect (ACCESS
POINTS)” ( A p. 151)
o Regular Operation
Record videos to send a video mail.
1 Tap “MENU”.
Set the camera to the recording mode.
.
0The top menu appears.
2 Tap the “Wi-Fi” ( Q
) icon.
.
3
Tap “VIDEO MAIL” ( L).
.
4 Tap “VIDEO MAIL ADDRESS”.
.
5Select “VIDEO MAIL ADDRESS”, then tap  J.
.
0 To display the  L icon, tap the e-mail address.
0 To cancel the e-mail address, press the icon one more time.
0 Up to 8 e-mail addresses can be selected.
6 Tap “START” ( I).
.
7 Press the START/STOP button to start recording.
.
0Or, tap the REC on screen.
8 Recording starts after the 5-second countdown.
Using Wi-Fi by Creating a QR Code (GZ-EX555/GZ-EX515)204 
						

							.
0You can allow the recording to be performed for 15 seconds or press
the START/STOP button to stop.
9 Tap “SEND”.
.
0Sending of the video mail starts.
0 To check the file, tap “PLAY TO CHECK”.
0 When it is complete, tap “OK”.
Check the incoming e-mail.
TV MONITORING
o Setting (Once setting is done, start from the “Regular
Operation” below)
Create a QR code.
o Enter values in the required items for the TV monitor.
0 MAC address filter: set to “ON” if monitoring images with a specific TV
device.
0 Add the MAC address: register the physical address when monitoring
images with a specific TV device. (Up to 8 addresses can be registered)
Display the screen for reading the QR code.
1 Tap “MENU”.
(Operation on this camera)
.
0The top menu appears.
2 Tap the “Wi-Fi” ( Q
) icon.
(Operation on this camera)
.
3Tap  1 on the lower right of the screen.
(Operation on this camera)
.
4Tap “COMMON Wi-Fi SETTING”.
(Operation on this camera)
.
5Tap “SET FROM QR CODE”.
Using Wi-Fi by Creating a QR Code (GZ-EX555/GZ-EX515)205 
						

							.
6Tap “EXECUTE”.
.
Read a QR code.
1Read a QR code.
(Operation on this camera)
.
2Tap “YES”.
.
3Tap “OK”.
.
0Tap “NEXT” to return to the screen to read the QR code.
0 Set contents are saved.
Registering the access points (wireless LAN router) to this
unit
o Wi-Fi Protected Setup (WPS) Registration
1
Tap “MENU”.
(Operation on this camera)
.
0 The top menu appears.
2 Tap the “Wi-Fi” ( Q) icon.
(Operation on this camera)
.
3Tap  1 on the lower right of the screen.
(Operation on this camera)
.
4Tap “COMMON Wi-Fi SETTING”.
(Operation on this camera)
.
5Tap “ACCESS POINTS”.
(Operation on this camera)
.
6Tap “ADD”.
(Operation on this camera)
.
7Tap “EZ REGISTRATION WPS”.
(Operation on this camera)
Using Wi-Fi by Creating a QR Code (GZ-EX555/GZ-EX515)206 
						

							.
8Activate WPS of the access point (wireless LAN router) within 2 minutes.
0 To activate WPS, refer to the instruction manual of the device in use.
9 After registration is complete, tap “OK” on the camera’s screen.
(Operation on this camera)
.
oSearch the access point, and select from the list.
Set the name (SSID) of the access point (wireless LAN router) and the
password beforehand.
1 Tap “MENU”.
(Operation on this camera)
.
0The top menu appears.
2 Tap the “Wi-Fi” ( Q
) icon.
(Operation on this camera)
.
3Tap  1 on the lower right of the screen.
(Operation on this camera)
.
4Tap “COMMON Wi-Fi SETTING”.
(Operation on this camera)
.
5 Tap “ACCESS POINTS”.
(Operation on this camera)
.
6Tap “ADD”.
(Operation on this camera)
.
7Tap “SEARCH”.
(Operation on this camera)
.
0The search results appear on the camera’s screen.
8 Tap the name (SSID) of the desired access point from the list of search
results.
(Operation on this camera)
.
9Register a password.
(Operation on this camera)
.
0Tap on the on-screen keyboard to enter characters. The character
changes with every tap.
Using Wi-Fi by Creating a QR Code (GZ-EX555/GZ-EX515)207 
						

							“ABC”, for example, enter “A” by tapping once, “B” by tapping twice,
or “C” by tapping 3 times.
0 Tap “DELETE” to delete a character.
0 Tap “CANCEL” to exit.
0 Tap “A/a/1” to select character input type from upper case letter, lower
case letter, and number.
0 Tap  E or  F to move one space to the left or right.
0 The password is not required if the wireless LAN router is not security
protected.
10 After registration is complete, tap “OK” on the camera’s screen.
(Operation on this camera)
.
0Other methods, such as “Manual Registration” and “WPS PIN
Registration” are also available. Refer to the following link for details.
“Registering the Access Points of the Camera to Connect (ACCESS
POINTS)” ( A p. 151)
o Regular Operation
Connect the TV to the access point.
0 Connect the DLNA compatible TV to the access point (this function is
available for a connection via cables as well)
0 For details on connecting your TV to a Wi-Fi network, please refer to the
instruction manual of the TV in use.
Connecting This Camera to the TV
1 Tap “MENU”.
(Operation on this camera)
.
0The top menu appears.
2 Tap the “Wi-Fi” ( Q
) icon.
(Operation on this camera)
.
3Tap “TV MONITORING” ( K).
(Operation on this camera)
.
4Tap “START” ( I).
(Operation on this camera)
.
5Start making a connection.
(Operation on this camera)
.
6Connection in progress
.
7After the connection is completed, wait for the DLNA device to start up.
(Operation on this camera)
.
0If a considerable number of videos/still images are recorded in the
camera, it may take some time to start.
8 Images appear on the monitor of the DLNA device
(Operation on DLNA device)
.
0From the following instructions, perform operations on the DLNA
device.
For details on using the TV, refer to the instruction manual of the TV
in use.
Memo : 
0 If no image is displayed during TV monitoring, tap “STOP” to start from
step 1.
0 If the DLNA compatible TV in use cannot detect Everio, tap “STOP” to start
from the step 1 again.Using Wi-Fi by Creating a QR Code (GZ-EX555/GZ-EX515)208 
						

							Operating the Menu
There are two types of menus in this unit. 0 TOP MENU: Menu that contains all the items specific to the video
recording, still image recording, video playback, and still image playback modes respectively.
0 SHORTCUT MENU: Menu that contains the recommended functions for
video/still image recording.Operating the Top Menu
You can configure various settings using the menu.
*The following is a screen of the model with Wi-Fi functions.
1 Tap “MENU”.
.
0The top menu appears.
0 The menu differs according to the mode in use.
2 Tap the desired menu.
.
3Tap the desired setting.
.
Memo : 
0To display the previous/next menu
Tap  0 or  1.
0 To exit the screen
Tap  L (quit).
0 To display the help file
Tap  K (help) and tap the item.
Help file may not be available for some items.Settings Menu209 
						

							Operating the Shortcut Menu
.You can configure various settings of the recommended functions in the
video/still image recording mode using the shortcut menu.
*The following is a screen of the model with Wi-Fi functions.
1 Tap “MENU”.
.
2Tap the shortcut icon ( F).
.
0 The shortcut menu appears.
3 Tap the desired menu and setting.

.
0Allows settings of “EASY STORAGE”, “ANIMATION EFFECT”,
“DECORATE FACE EFFECT”, “SMILE SHOT”, “SMILE%/NAME
DISPLAY” and “BACKLIGHT COMP. (manual mode only) ”.

.
0Allows settings of “SMILE SHOT”, “SMILE%/NAME DISPLAY” and
“BACKLIGHT COMP. (manual mode only) ”.
Memo : 
0 To return to the top menu
Tap  J (return).
0 To exit the screen
Tap  L (quit).
0 To display the help file
Tap  K (help) and tap the item.Settings Menu210