JVC Gzr10 User Manual

CAMCORDER
LYT2701-002A
Detailed User Guide
GZ-R10 

Table of Contents
Getting Started
Verifying the Accessories ........................................................  3 Turning on this Unit ..................................................................  4
Opening the Terminal Cover (SD Card Cover) ........................  5Charging ..................................................................................  5
Resetting this Unit .................................................................... 6
Grip Adjustment...

Verifying the Accessories
If any of the items are missing or defective, consult your JVC dealer or the nearest JVC service center.IllustrationDescription
.
AC Adapter
AC-V11U
0 Charges this unit. Attach the charging adapter cable to the tip of the cord.
It can also be used when recording or playing back videos indoors.
.
Charging Adapter Cable
0 Attach to the tip of the cord of the AC adapter and connect to the USB connector of this unit to charge.
.
USB Cable
(Type A - Micro Type B)
0 Connects this unit...

Turning on this Unit
Open the LCD monitor to turn on this unit.
To turn off the power, close the LCD monitor.
o To turn on the power
Open the LCD monitor.
.
oTo turn off the power
Close the LCD monitor.
.
The POWER/ACCESS lamp goes off and the power is turned off.
“POWER/ACCESS (Power/Access) Lamp” ( A p. 96)
Getting Started4 

Opening the Terminal Cover (SD Card Cover)
o To open
.
AOpen the LCD monitor.
B Slide down the terminal cover lock and slide the cover aside.
C Lift the cover slowly.
o To close
.
Leave the LCD monitor open first.A Flip down the cover slowly while making sure the gray waterproof seal
fits into the opening at the terminals.
B Press the entire cover against the camcorder with equal force and firmly
attach the cover completely.
C Slide the cover until it clicks into place.
The cover is not properly closed...

Resetting this Unit
When a malfunction occurs on this unit, reset the unit in the following way.1 Open the terminal cover.
0 Remove the power cord and all connecting cables.
2 Close the LCD monitor to turn off this unit.
3 Press the Reset button gently using an object with pointed tip.Caution : 
0Press the Reset button just once gently.
0 Do not use sharp pointed objects. It may damage the unit or cause electric
shock.
Memo : 
0 If malfunction persists even after pressing the Reset button, refer to...

Attaching the Core Filter (for Optional AVCable)
Attach a core filter to the AV cable that is connected to this unit.
The core filter reduces interference when this unit is connected to other
devices.
.Inserting an SD Card
Insert a commercially available SD card before recording.
“Types of Usable SD Card” ( A p. 8)
“Approximate Video Recording Time” ( A p. 43)1
Open the terminal cover.
.
2Close the LCD monitor to turn off this unit.
3 Insert an SD card.
.
Warning
0Make sure not to insert the SD card in...

Removing the Card
Push the SD card inward once, then pull it out straight..
Types of Usable SD Card
The following SD cards can be used on this unit.
Operations are confirmed on the SD cards from the following manufacturers.
0 Panasonic
0 TOSHIBA
0 SanDisk
SD Card
.
0 This unit supports 256 MB to 2 GB SD cards.
0 Use a Class 4 or higher compatible SD card (2 GB) for video recording.
SDHC Card
.
0 Use a Class 4 or higher compatible SDHC card (4 GB to 32 GB) for video
recording.
SDXC Card
.
0 Use a Class 4...

Using the Touch Screen
The LCD monitor of this unit is a touch panel which enables operations by
touching the screen.
Icon operation buttons, thumbnails, and menu items are displayed on the
touch screen according to the mode in use.
0 There are two ways to operate the touch screen, namely “tap” and “drag”.
The following are some examples.A  Tap the displayed button (icon) or thumbnail (file) on the touch screen
to make selection.
B  Drag the thumbnails on the touch screen to search for the desired file....

6Tap “OK”.
.
0Setting ends and returns to the menu screen.
Caution : 
0Do not tap areas other than the “+” mark during touch screen adjustment
(steps 4 - 5). Doing so may cause the touch screen to malfunction.
Memo : 
0 Adjust by lightly tapping with a corner of an SD card, etc.
0 Do not press with an object with a sharp tip or do not press hard.Names of Buttons and Functions on the LCD Monitor
The following screens are displayed during the  A video and  B still image
modes, and operate as touch...