JVC Gzr10 User Manual

Playing Back Still Images
You can select and play back the recorded still images from an index screen
(thumbnail display).1 Open the LCD monitor.
.
0Check if the recording mode is  B.
0 If the mode is  A video, tap  A on the recording screen to display the
mode switching screen.
Tap  B to switch the mode to still image.
2 Tap  M
 to select the playback mode.
.
3 Tap on the file to start playback.
.
0Tap  u to return to the index screen.
0 L appears on the last image played back.
0 Lines in different...

During Still Image Playback
.
0When this unit is not operated, the operation buttons on the touch screen
disappear automatically. Tap on the screen to display the operation
buttons again.
DisplayDescriptionAVideo/Still Image
Mode
A /BSwitches between video and still image
modes.BhReturns to the previous still image
0 You can perform the same operation with the
zoom lever.Cd  / eStarts/pauses slideshow
0 The same operation can be performed with
the SET button.DgAdvances to the next still image
0 You can...

Connecting to and Viewing on TV
You can connect this unit to a TV for playback. The image quality on TV
varies with the type of TV and the connecting cable. Select the connector
that best suits your TV.
0 Refer also to the instruction manual of the TV in use.
“Connecting via the HDMI Mini Connector” ( A p. 53)
“Connecting via the AV Connector” ( A p. 55)
0 To display the date and time on TV, set both “DISPLAY DATE/TIME” and
“DISPLAY ON TV” to “ON”.
( A  p. 86)
“ DISPLAY ON TV ” ( A p. 92)
Unnatural...

Memo : 
0Change the settings in “HDMI OUTPUT” according to the connection.
“ HDMI OUTPUT ” ( A p. 92)
0 When connected to the TV via the HDMI mini cable, images and sounds
may not be output properly depending on the TV connected.
In such cases, perform the following operations.
1) Disconnect the HDMI mini cable and connect it again.
2) Turn off and on this unit again.
0 For questions about the TV or method of connection, contact your TV's
manufacturer.Operating in Conjunction with TV via HDMI...

Connecting via the AV Connector
To playback videos on TV, connect the AV cable (optional: QAM1322-001)to the AV terminal of this unit.
0 Refer also to the instruction manual of the TV in use.
1
Connect to a TV.
.
2Connect the adapter cable and AC adapter to this unit.
.
3Open the LCD monitor.
.
0The unit turns on automatically.
4 Press the external input button on the TV to switch to the input from this
unit via the connected connector.
.
5Play back a file.
.
“Playing Back Videos” ( A p. 44)
“Playing...

Deleting Unwanted Files
Delete unwanted videos and still images when the space in the recording
media is running out.
Doing so frees up more space in the recording media. “Deleting the Currently Displayed File” ( A p. 56)
“Deleting Selected Files” ( A p. 56)Memo : 
0
Deleted files cannot be restored.
0 When files in a playlist are deleted, the playlist changes.
0 Files that are protected cannot be deleted.
Release protection before deleting the file.
“Protecting Files” ( A p. 57)
0 Be sure to back up...

5Tap “SET”.
.
0If no file is selected, the “SET” button cannot be pressed.
6 Tap “EXECUTE” to confirm the deletion.
.
0After deleting is complete, tap “OK”.
0 To cancel the deletion, tap “QUIT”.
Protecting Files
Prevent important videos/still images from being deleted accidently by
protecting them.
“Protecting/Releasing Protection of the Currently Displayed File” ( A  p. 57)
“Protecting/Releasing Protection of Selected Files” ( A p. 58)Caution : 
0
When the recording media is formatted, even the...

Protecting/Releasing Protection of Selected Files
Protects or releases protection of the selected files.
1Open the LCD monitor.
.
0Tap  A or  B to select the video or still image mode.
0 Tap  B or  A on the recording screen to display the mode switching
screen.
Tap  A to switch to the video mode  A.
Tap  B to switch to the still image mode  B.
2 Tap  M
 to select the playback mode.
.
0 While the video mode is shown in the image, the same operations
apply for the still image mode.
3 Tap “MENU”.
.
4Tap...

Capturing a Still Image in the Video DuringPlayback
You can capture still images of the scenes you like in the recorded videos.1 Open the LCD monitor.
.
0Check if the recording mode is  A.
0 If the mode is  B still image, tap  B on the recording screen to display
the mode switching screen.
Tap  A to switch the mode to video.
2 Tap  M
 to select the playback mode.
.
3 Tap on the desired video.
4 Tap pause  e at the desired scene during playback.
.
0 After pausing the video, you can fine-tune the point to...

6Tap the video to edit.
.
7Tap  e to pause playback at the desired start point, then tap “A”.
.
0When “A” is tapped, the start point is set.
0 After setting the start point, tap  d to continue playback.
8 Tap  e to pause playback at the desired end point, then tap “B”.
.
0When “B” is tapped, the end point is set.
0 To reset the start or end point, tap “A” or “B” at the desired scene
(position).
0 You can fine adjust the position by pressing  l and  k while
playback is paused.
9 Tap “SET”.
.
0When “SET”...