JVC Gzr10 User Manual

							Playing Back Still Images
You can select and play back the recorded still images from an index screen
(thumbnail display).1 Open the LCD monitor.
.
0Check if the recording mode is  B.
0 If the mode is  A video, tap  A on the recording screen to display the
mode switching screen.
Tap  B to switch the mode to still image.
2 Tap  M
 to select the playback mode.
.
3 Tap on the file to start playback.
.
0Tap  u to return to the index screen.
0 L appears on the last image played back.
0 Lines in different colors are displayed under the thumbnail display to
distinguish the recording date.
Operation Buttons for Still Image Playback
During Index Screen Display
.
0 Still images that are recorded continuously in high-speed or medium-
speed will be grouped together. Only the first recorded file (still image) is
shown and the group is displayed with a green frame.
DisplayDescriptionAVideo/Still Image
Mode
A /BSwitches between video and still image
modes.BDateMoves to the previous/next dateC>Displays the next index screen (thumbnail display)
0 You can perform the same operation with the
zoom lever.D
						

							During Still Image Playback
.
0When this unit is not operated, the operation buttons on the touch screen
disappear automatically. Tap on the screen to display the operation
buttons again.
DisplayDescriptionAVideo/Still Image
Mode
A /BSwitches between video and still image
modes.BhReturns to the previous still image
0 You can perform the same operation with the
zoom lever.Cd  / eStarts/pauses slideshow
0 The same operation can be performed with
the SET button.DgAdvances to the next still image
0 You can perform the same operation with the
zoom lever.E3Switches to the recording mode.FuReturns to index screenGRDeletes the currently displayed still image.HMENUDisplays the menu screenMemo : 
0 Tap or drag on the operation area of the touch screen.Caution : 
0This unit is a microcomputer-controlled device. Electrostatic discharge,
external noise and interference (from a TV, a radio, etc.) might prevent it
from functioning properly. In such a case, close the monitor screen to turn off the power and remove the AC adapter, then press the Reset button to
reset this unit.
“Resetting this Unit” ( A p. 6)
Slideshow Playback
Still images can be played back in a slideshow.
Tap  I during still image playback to start the slideshow.
.
“Operation Buttons for Still Image Playback” ( A p. 51)
Memo : 
0
Effects can be added to the transitions in slideshow playback.
“ SLIDE SHOW EFFECTS ” ( A p. 88)Playback52 
						

							Connecting to and Viewing on TV
You can connect this unit to a TV for playback. The image quality on TV
varies with the type of TV and the connecting cable. Select the connector
that best suits your TV.
0 Refer also to the instruction manual of the TV in use.
“Connecting via the HDMI Mini Connector” ( A p. 53)
“Connecting via the AV Connector” ( A p. 55)
0 To display the date and time on TV, set both “DISPLAY DATE/TIME” and
“DISPLAY ON TV” to “ON”.
( A  p. 86)
“ DISPLAY ON TV ” ( A p. 92)
Unnatural Displays on TVTroubleActionImages do not
appear on the TV
properly.0 Disconnect the cable and connect again.
0 Turn off and on this unit again.
0 Images may not appear properly when the
remaining battery power is low. Use an AC
adapter.Images are
projected vertically
on the TV.0 Set “VIDEO OUTPUT” in the “CONNECTION
SETTINGS” menu to “4:3”.
“ VIDEO OUTPUT ” ( A p. 92)Images are
projected
horizontally on the
TV.0 Adjust the TV's screen accordingly.The color of images
looks strange.0 Adjust the TV's screen accordingly.HDMI-CEC
functions do not
work properly, and
the TV does not
work in conjunction
with this unit.0 TVs may operate differently depending on the
specifications, even if they are HDMI-CEC
compliant. Therefore, the HDMI-CEC functions
of this unit cannot be guaranteed to operate in
combination with all the TVs. In such cases, set
“HDMI CONTROL” to “OFF”.
“ HDMI CONTROL ” ( A p. 92)The language on
the display
changed.0 It may occur when you connect this unit to a TV
with different language setting using an HDMI
mini cable.Caution : 
0 Do not remove the recording medium or perform any other operation (such
as turning off the power) while accessing files. Also, be sure to use the
provided AC adapter, as the data on the recording medium may be
corrupted if the battery becomes exhausted during operation. If the data on the recording medium becomes corrupted, format the recording
medium to use the medium again.
Connecting via the HDMI Mini Connector
If you are using an HDTV, you can play back in HD quality by connecting to the HDMI mini connector.
0 Use a High Speed HDMI mini cable as the HDMI mini cable.
0 Refer also to the instruction manual of the TV in use.
1
Connect to a TV.
.
2Connect the adapter cable and AC adapter to this unit.
.
3Open the LCD monitor.
.
0The unit turns on automatically.
4 Press the external input button on the TV to switch to the input from this
unit via the connected connector.
.
5Play back a file.
.
“Playing Back Videos” ( A p. 44)
“Playing Back Still Images” ( A p. 51)
Playback53 
						

							Memo : 
0Change the settings in “HDMI OUTPUT” according to the connection.
“ HDMI OUTPUT ” ( A p. 92)
0 When connected to the TV via the HDMI mini cable, images and sounds
may not be output properly depending on the TV connected.
In such cases, perform the following operations.
1) Disconnect the HDMI mini cable and connect it again.
2) Turn off and on this unit again.
0 For questions about the TV or method of connection, contact your TV's
manufacturer.Operating in Conjunction with TV via HDMI
Connecting this unit to an HDMI-CEC enabled TV using the HDMI mini cable allows linked operations with the TV to be performed.
0 HDMI-CEC (Consumer Electronics Control) is an industry standard that
enables interoperability between HDMI-CEC compliant devices that are
connected via HDMI cables.
Memo : 
0 Not all HDMI control devices comply with the HDMI-CEC standard. The
HDMI control function of this unit will not work when connected to these
devices.
0 This unit is not guaranteed to operate with all HDMI-CEC enabled devices.
0 Depending on the specifications of each HDMI-CEC enabled device,
some functions may not work with this unit. (For details, refer to the
instruction manual of your TV.)
0 Unintended operations may occur with some connected devices. In these
cases, set “HDMI CONTROL” to “OFF”.
“ HDMI CONTROL ” ( A p. 92)
Preparations
0
Connect an HDMI mini cable between this unit and the TV.
“Connecting via the HDMI Mini Connector” ( A p. 53)
0 Turn on the TV and set the HDMI-CEC related setting to “ON”. (For details,
refer to the instruction manual of the TV.)
0 Set “HDMI CONTROL” in the CONNECTION SETTINGS menu to “ON”.
“ HDMI CONTROL ” ( A p. 92)
Operation Method 1
1 Turn on this unit.
2 Select the playback mode.
3 Connect the HDMI mini cable.
0 TV turns on automatically and switches to HDMI input mode when
this unit is turned on.
Operation Method 2
1 Turn off the TV.
0 This unit turns off automatically.Memo : 
0Depending on the TV connected, the display language of this unit will
automatically switch to the language that is selected for the TV when this
unit is turned on.
(This is applicable only if this unit supports the language selected for the
TV.) To use this unit with a language that differs from the display language of the TV, set “HDMI CONTROL” to “OFF”.
0 The display language of the TV will not switch automatically, even if the
display language of this unit is changed.
0 These functions may not work correctly when devices such as amplifier
and selector are connected. Set “HDMI CONTROL” to “OFF”.
0 If HDMI-CEC does not work properly, turn off and on this unit again.Playback54 
						

							Connecting via the AV Connector
To playback videos on TV, connect the AV cable (optional: QAM1322-001)to the AV terminal of this unit.
0 Refer also to the instruction manual of the TV in use.
1
Connect to a TV.
.
2Connect the adapter cable and AC adapter to this unit.
.
3Open the LCD monitor.
.
0The unit turns on automatically.
4 Press the external input button on the TV to switch to the input from this
unit via the connected connector.
.
5Play back a file.
.
“Playing Back Videos” ( A p. 44)
“Playing Back Still Images” ( A p. 51)
Memo : 
0
For questions about the TV or method of connection, contact your TV's
manufacturer.
0 AV cable (Optional: QAM1322-001)
Wiring specifications (for video/audio) of the 4-pole mini plug are described
in the following.
To purchase, consult your nearest JVC service center.
.
0When using the optional AV cable, attach the core filter provided with this
unit first.
“Attaching the Core Filter (for Optional AV Cable)” ( A p. 7)
Playback55 
						

							Deleting Unwanted Files
Delete unwanted videos and still images when the space in the recording
media is running out.
Doing so frees up more space in the recording media. “Deleting the Currently Displayed File” ( A p. 56)
“Deleting Selected Files” ( A p. 56)Memo : 
0
Deleted files cannot be restored.
0 When files in a playlist are deleted, the playlist changes.
0 Files that are protected cannot be deleted.
Release protection before deleting the file.
“Protecting Files” ( A p. 57)
0 Be sure to back up important files on a computer.
“Backing Up All Files” ( A p. 69)
Deleting the Currently Displayed File
Deletes the currently displayed file.
Caution : 
0
Deleted files cannot be restored.
1
Tap  R.
.
0While the video mode is shown in the image, the same operations
apply for the still image mode.
2 Tap “YES”.
.
0Tap  h  / g  to select the previous or next file.
0 When no file remains, the screen returns to the index screen.
Deleting Selected Files
Deletes the selected files.
Caution : 
0Deleted files cannot be restored.
1
Open the LCD monitor.
.
0Tap  A or  B to select the video or still image mode.
0 Tap  B or  A on the recording screen to display the mode switching
screen.
Tap  A to switch to the video mode  A.
Tap  B to switch to the still image mode  B.
2 Tap  M
 to select the playback mode.
.
0 While the video mode is shown in the image, the same operations
apply for the still image mode.
3 Tap  R.
.
4 Tap on the files to delete.
.
0P appears on the selected files.
To remove  P from a file, tap on the file again.
0 Tap “SEL ALL” to select all files.
0 Tap “REL ALL” to release all selections.
Editing56 
						

							5Tap “SET”.
.
0If no file is selected, the “SET” button cannot be pressed.
6 Tap “EXECUTE” to confirm the deletion.
.
0After deleting is complete, tap “OK”.
0 To cancel the deletion, tap “QUIT”.
Protecting Files
Prevent important videos/still images from being deleted accidently by
protecting them.
“Protecting/Releasing Protection of the Currently Displayed File” ( A  p. 57)
“Protecting/Releasing Protection of Selected Files” ( A p. 58)Caution : 
0
When the recording media is formatted, even the protected files will be
deleted.
Protecting/Releasing Protection of the Currently Displayed
File
Protects or releases protection of the currently displayed file.
1 Tap “MENU”.
.
0While the video mode is shown in the image, the same operations
apply for the still image mode.
2 Tap “EDIT”.
.
3Tap “PROTECT/CANCEL”.
.
4Tap “YES”.
.
0Tap  h  / g  to select the previous or next file.
0 After setting, tap “OK”.
Editing57 
						

							Protecting/Releasing Protection of Selected Files
Protects or releases protection of the selected files.
1Open the LCD monitor.
.
0Tap  A or  B to select the video or still image mode.
0 Tap  B or  A on the recording screen to display the mode switching
screen.
Tap  A to switch to the video mode  A.
Tap  B to switch to the still image mode  B.
2 Tap  M
 to select the playback mode.
.
0 While the video mode is shown in the image, the same operations
apply for the still image mode.
3 Tap “MENU”.
.
4Tap “EDIT”.
.
5Tap “PROTECT/CANCEL”.
.
6Tap on the files to protect or release protection of.
.
0P appears on the selected files.
To remove  P from a file, tap on the file again.
0 I  and  P
 are displayed on the files that are already protected.
To release protection of a file, tap on the file such that  P is removed.
0 Tap “SEL ALL” to select all files.
0 Tap “REL ALL” to release all selections.
7 Tap “SET” to complete the setting.
.
0Protect marks  I appear on the selected files.
Protect marks  I disappear from the deselected files.
0 If no file is selected, the “SET” button cannot be pressed.
Editing58 
						

							Capturing a Still Image in the Video DuringPlayback
You can capture still images of the scenes you like in the recorded videos.1 Open the LCD monitor.
.
0Check if the recording mode is  A.
0 If the mode is  B still image, tap  B on the recording screen to display
the mode switching screen.
Tap  A to switch the mode to video.
2 Tap  M
 to select the playback mode.
.
3 Tap on the desired video.
4 Tap pause  e at the desired scene during playback.
.
0 After pausing the video, you can fine-tune the point to capture by
tapping forward slow-motion  k and reverse slow-motion  l.
5 Tap the  A button.
.
Memo : 
0 Still images are captured with a size of 1920×1080.
0 Captured still images are stored in the media where the video is being
played back from.Capturing a Required Part in the Video
(TRIMMING)
Select the required part of a video and save it as a new video file.
0 The original video remains in its existing location.1
Open the LCD monitor.
.
0Check if the recording mode is  A.
0 If the mode is  B still image, tap  B on the recording screen to display
the mode switching screen.
Tap  A to switch the mode to video.
2 Tap  M
 to select the playback mode.
.
3 Tap “MENU”.
.
4Tap “EDIT”.
.
5Tap “TRIMMING”.
.
Editing59 
						

							6Tap the video to edit.
.
7Tap  e to pause playback at the desired start point, then tap “A”.
.
0When “A” is tapped, the start point is set.
0 After setting the start point, tap  d to continue playback.
8 Tap  e to pause playback at the desired end point, then tap “B”.
.
0When “B” is tapped, the end point is set.
0 To reset the start or end point, tap “A” or “B” at the desired scene
(position).
0 You can fine adjust the position by pressing  l and  k while
playback is paused.
9 Tap “SET”.
.
0When “SET” is tapped, the trimming area is confirmed.
10 Tap “YES”.
.
0After copying, tap “OK”.
0 When copying finishes, the copied file is added to the index screen.
Memo : 
0
The division point may deviate slightly from the selected scene.Deleting Playlists
Delete the playlists that you have created.1 Open the LCD monitor.
.
0Check if the recording mode is  A.
0 If the mode is  B still image, tap  B on the recording screen to display
the mode switching screen.
Tap  A to switch the mode to video.
2 Tap  M
 to select the playback mode.
.
3 Tap “MENU”.
.
4Tap “PLAYBACK SETTING”.
.
5Tap “PLAYBACK PLAYLIST”.
.
Editing60