Konica Minolta bizhub 361 User Manual

bizhub 2153-5
3.2 Loading the original3
Tips
-The scanned original is sent with A4 w width, B4 w width, or A3 w width, whichever is longer than and 
closest to the original.
-If the original is 39-1/2 inches (1,000 mm) or more in length, this machine judges that a original jam oc-
curs, and stops scanning.
-The area 2 mm around the original image cannot be scanned.
-To scan the A3-width original in the Super Fine mode, up to 35-1/2 inches (900mm) are targeted for 
scanning.
3.2.2 Loading the original on...

bizhub 2153-6
3.3 Specifying the fax image quality3
3.3 Specifying the fax image quality
There are various types of originals to be sent, for example, original in small print, original with accurate draw-
ings, or original with photos. To send a clear original, specify the image quality to fit the original as shown 
below.
3.3.1 Specifying the image quality
1Press the Fax key.
The machine switches to the fax mode.
2Load the original.
3Press the Quality key.
4Use +, to select the fax image quality, and...

bizhub 2153-7
3.4 Specifying a destination3
3.4 Specifying a destination
3.4.1 Specifying only one destination
The following methods are provided to specify only one destination.
-Entering a dial number
-One-touch Dial
-Speed dial
-Group dial
-Program dial
-Address Book
This example shows a procedure to send a fax using the ADF.
3.4.2 Entering a fax number
1Press the Fax key to change to the fax mode.
2Load the original.
%For details on how to load the original, refer to page 3-4.
3When necessary,...

bizhub 2153-8
3.4 Specifying a destination3
3.4.3 One touch dial
Register a destination number in a One-Touch Dial Key in advance; you can only press the One-Touch Dial 
Key to specify a target destination.
dReference
For details on how to register a destination in a one-touch dial key, refer to page 7-5
1Load the original.
%For details on how to load the original, refer to page 3-4.
2When necessary, specify a desired option for [QUALITY].
%For details on [QUALITY], refer to page 3-6.
3Press a...

bizhub 2153-9
3.4 Specifying a destination3
3.4.4 Speed dial
Register a destination number in Speed Dial in advance; you can specify a destination with a speed dial 
number to send a fax.
dReference
For details on how to register the speed dial, refer to page 7-8.
1Load the original.
%For details on how to load the original, refer to page 3-4.
2When necessary, specify a desired option for [QUALITY].
%For details on [QUALITY], refer to page 3-6.
3Press the Speed Dial key.
4Enter a 3-digit speed dial...

bizhub 2153-10
3.4 Specifying a destination3
3.4.5 Group dial
Register a group in a One-Touch Dial Key in advance; you can only press the One-Touch Dial Key to send 
a fax to multiple destinations registered in the group.
dReference
For details on how to register a group in a One-Touch Dial Key, refer to page 7-10.
1Load the original.
%For details on how to load the original, refer to page 3-4.
2When necessary, specify a desired option for [QUALITY].
%For details on [QUALITY], refer to page 3-6.
3Press a...

bizhub 2153-11
3.4 Specifying a destination3
3.4.6 Program dial
Register a destination number and sending-receiving function such as the specified-time transmission or 
polling reception in a One-Touch Dial Key in advance; you can only press the One-Touch Dial Key to exe-
cute the function.
dReference
For details on how to register a destination in the program dial, refer to page 7-11.
1Load the original.
%For details on how to load the original, refer to page 3-4.
%This step is not required for polling...

bizhub 2153-12
3.4 Specifying a destination3
3.4.7 Address Book (List, search)
Pressing AddressBook displays the contents registered in one-touch dials and speed dials. Search for a 
destination in the phone book to send a fax.
1Load the original.
%For details on how to load the original, refer to page 3-4.
2When necessary, specify a desired option for [QUALITY].
%For details on [QUALITY], refer to page 3-6.
3Press AddressBook.
4Use +, to select [LIST] or [SEARCH], and press the OK key.
%Selecting...

bizhub 2153-13
3.4 Specifying a destination3
3.4.8 Chain dial
Specify a destination with a combination of the One-Touch Dial Key, speed dial, dial entry, and redial/pause 
functions to send a fax.
The following methods are provided to specify a destination.
-Entering a dial number
-One-touch Dial
-Speed dial
-Address Book
Tips
-To send a fax to multiple destinations, use the Memory TX function.
This example explains how to use a One-Touch Dial Key and enter a destination fax number.
1Press the On Hook...

bizhub 2153-14
3.4 Specifying a destination3
3Use +, to select [BROADCAST], and press the OK key.
4Specify a destination, and press the OK key.
%When using a One-Touch Dial Key: Press the One-Touch Dial Key of a destination.
%When using Speed Dial: Press the Speed Dial key, and enter a 3-digit speed dial number of a des-
tination.
%When using Group Dial: Press the One-Touch Dial Key assigned to a destination group.
%When using Address Book: Press AddressBook to select [LIST] or [SEARCH], and specify a...