Konica Minolta bizhub 40P User Manual

Memory Direct 81
When all files (PDF, XPS, JPEG and TIFF) are displayed, select 
Type OF FILES, and then press the Menu/Select key.
4From the file list, select the file that you wish to print, and then press the 
Menu/Select key.
If the file to be printed is in a folder, select the folder, and then press the 
Menu/Select key.
A maximum of 99 folders and files can be displayed.
Up to 8 folder levels can be displayed.
5Select PRINT, and then press the Menu/Select key.
When printing is finished, the...

Memory Direct 82
Downloaded From ManualsPrinter.com Manuals 

Using Media
Downloaded From ManualsPrinter.com Manuals 

Media Specifications 84
Media Specifications
Supported media types/sizes
The following table shows the information about the media types and sizes 
supported by this printer.
For the information about custom size, see “Custom size” on page 85.
If PAPER MENU/PAPER SOURCE/TRAY1/2/3/4/SIZE SET-
TING
 is set to AUTO, the printer automatically detects the paper size 
of Letter, Legal, Government Legal, Executive, A4, A5, and B5 (JIS).
Media Media Size Tray* Duplex (double-sided)Inch Millimeter
Letter 8.5 x...

Media Types 85
Custom size
For custom size, you can use either the printer driver or printers con-
trol panel to specify the settings within the range shown in the table on 
previous page.
Media Types
Before purchasing a large quantity of special media, do a trial print 
with the same media and check the print quality. For a list of approved media, 
refer to printer.konicaminolta.com.
Plain Paper (Recycled Paper)
Use media that is
Suitable for plain paper laser printers, such as standard or recycled...

Media Types 86
DO NOT use media that is
„Coated with a processed surface (such as carbon paper, and colored 
paper that has been treated)
„Carbon backed
„Unapproved iron-on transfer media (such as heat-sensitive paper, 
heat-pressure paper, and heat-press transfer paper) 
„Cold-water-transfer paper
„Pressure sensitive
„Designed specifically for inkjet printers (such as superfine paper, glossy 
paper, glossy film, and postcards)
„Paper that has already been printed on
–Paper that has been printed on with...

Media Types 87 Thick Stock
Paper thicker than 106 g/m2 (28 lb bond) is referred to as thick stock. Test all 
thick stock to ensure acceptable performance and to ensure that the image 
does not shift. 
Banner Paper
Length: 356 - 900 mm
Banner paper is not supported for printing at 1200 dpi.
Image quality of the area from 356 to 900 mm in length is not guaran-
teed.
DO NOT use thick stock that is
„Mixed with any other media in a tray (as this will cause printer misfeeding)
Envelopes
Print on the front...

Media Types 88
Use envelopes that are
„Common office envelopes approved for laser printing with diagonal joints, 
sharp folds and edges, and ordinary gummed flaps
Because the envelopes pass through heated rollers, the gummed 
area on the flaps may seal. Using envelopes with emulsion-based 
glue avoids this problem.
„Approved for laser printing
„Dry 
DO NOT use envelopes that have
„Sticky flaps
„Tape seals, metal clasps, paper clips, fasteners, or peel-off strips for seal-
ing
„Transparent windows
„Too...

Media Types 89
Use label sheets that are
„Recommended for laser printers
„Letter or A4 size (adhesive label stock)
DO NOT use label sheets that 
„Have labels that easily peel off or have parts of the label already removed
„Have backing sheets that have peeled away or have exposed adhesive
Labels may stick to the fuser, causing them to peel off and media 
misfeeds to occur.
„Are precut or perforated
Postcards
Try printing your data on a sheet of plain paper first to check placement.
Use postcards that...

Media Types 90
„Precut or perforated
„Preprinted or multicolored 
If the postcard is warped, press on the warped 
area before putting it in the tray.
Thin Paper
Test all thin paper to ensure acceptable performance.
Capacity Tray 1Up to 150 sheets of thin paper, depending on 
their thickness.
Tray 2/3/4Up to 550 sheets of thin paper, depending on 
their thickness.
OrientationFace up
Driver 
Media TypeThin
Weight
64-67 g/m
2 (17-18 lb bond)
DuplexingSee page 84 for supported sizes.
Downloaded From...