Konica Minolta bizhub PRO 950 User Manual

							4Installation of the printer driver (Windows) (Manual installation using the Add Printer wizard)
4-10 bizhub PRO 950
4.2.3 Network connection (Web Service print)
In Windows Vista/Server 2008, Web Service print-supporting printers on the 
network can be located and installed.
TCP/IP setting for this machine
Specify the IP address on TCP/IP Setting of this machine.
For details on specifying the IP address of this machine, refer to the User’s 
Guide [POD Administrator’s Reference].
Web Service setting for the copier
Enable Web Service printing in “Web Service Setting” of the copier.
For details on specifying the Web Service Setting of this machine, refer to the 
User’s Guide [POD Administrator’s Reference].
Install a printer through the network window
0The installation should be performed by a qualified system administrator 
or printer administrator.
1Turn on the power of the machine while it is connected to the network.
– To allow printers to be detected during installation, the machine 
must be connected to the network.
2To use the Web Service print, check that “Network discovery” is 
enabled in “Network and Sharing Center” on the computer.
3Insert the Driver CD into the CD-ROM drive of the computer.
4Click the [Start] button, and then click “Network”.
The Network window appears, showing the computers and devices on 
the network.
5Select the device name of the copier, and then click “Install” from the 
toolbar.
The selected Web Service print-supporting printer is found, and then 
the Found New Hardware Wizard dialog box appears.
6Click [Locate and install driver software (recommended)].
A screen for confirming the search method appears.
7Click [Do not search online].
8Click [Browse my computer for driver software (advanced)].
Downloaded From ManualsPrinter.com Manuals 
						

							Installation of the printer driver (Windows) (Manual installation using the Add Printer wizard)4
bizhub PRO 950 4-11
9Click [Browse].
10Specify the desired folder on the Driver CD or PS Driver CD that con-
tains the printer driver, and then click the [Open].
– Select printer driver (PCL, PostScript PPD) to be used.
– For details of the built-in CD-ROM construction, see “Folder struc-
ture on the CD-ROM (bizhub PRO 950 Driver CD-ROM)” on 
page 1-6.
11Click the [OK].
The “Printer” list appears.
12Click the [Next].
13Follow the on-screen instructions.
– If the “User Account Control” window appears, click the [Continue].
14Click the [Finish].
15When the installation is completed, make sure that the icon of the in-
stalled printer appears in the Printers window.
16Remove the CD-ROM from the CD-ROM drive.
This completes the printer driver installation.
Specify an IP address in [Add a printer] to install a printer driver
0The installation should be performed by a qualified system administrator 
or printer administrator.
1Turn on the power of the machine while it is connected to the network.
– To allow printers to be detected during installation, the machine 
must be connected to the network.
2To use the Web Service print, check that “Network discovery” is 
enabled in “Network and Sharing Center” on the computer.
3Insert the Driver CD into the CD-ROM drive of the computer.
4Click the [Start] button, and then click “Control Panel”.
5From “Hardware and Sound”, click “Printer”.
– If Control Panel is displayed with Classic View, double-click “Print-
ers”.
Downloaded From ManualsPrinter.com Manuals 
						

							4Installation of the printer driver (Windows) (Manual installation using the Add Printer wizard)
4-12 bizhub PRO 950The Printers window appears.
6Click “Add a printer” from the toolbar.
The Add Printer window appears.
7Click [Add a local printer].
8Click [Create a new port].
– Select [Standard TCP/IP].
9Click [Next].
10Select [Web Service Device] and enter the IP Address.
– A printer is searched that is compatible with the Web service print 
of an IP address entered, and then a the Found New Hardware Wiz-
ard dialog box appears.
11Click [Locate and install driver software (recommended)].
12Click [Do not search online].
13Click [Browse my computer for driver software (advanced)].
14Click [Browse].
15Specify the desired folder on the Driver CD or PS Driver CD that con-
tains the printer driver, and then click the [Open].
– Select printer driver (PCL, PostScript PPD) to be used.
– For details of the built-in CD-ROM construction, see “Folder struc-
ture on the CD-ROM (bizhub PRO 950 Driver CD-ROM)” on 
page 1-6.
16Click the [OK].
Downloaded From ManualsPrinter.com Manuals 
						

							Installation of the printer driver (Windows) (Manual installation using the Add Printer wizard)4
bizhub PRO 950 4-13The “Printer” list appears.
17Click the [Next].
18Follow the on-screen instructions.
– If the “User Account Control” window appears, click the [Continue].
19Click the [Finish].
20When the installation is completed, make sure that the icon of the in-
stalled printer appears in the Printers window.
21Remove the CD-ROM from the CD-ROM drive.
This completes the printer driver installation.
4.2.4 Local connection
When this machine is connected via a USB port, the printer driver can be in-
stalled with plug-and-play.
1Connect the copier to a computer using a USB cable, and then start up 
the computer.
2Turn on the main power of the copier.
– The Found New Hardware Wizard dialog box appears.
– If the Found New Hardware Wizard dialog box does not appear, 
turn off the copier, then on again.
– When turning off the power, then on again, wait at least 10 seconds 
before turning it on again. Otherwise, this machine may not function 
properly.
3Set the “Driver CD or PS Driver CD” in the CD-ROM drive.
4Click “Locate and install the driver software (recommended)”.
– If the Windows connect to Windows Update dialog box appears, 
select “NO”.
5From “Search for the best driver in these locations,” select “Include this 
location in the search”, and then click the [Browse].
6Specify the desired folder on the Driver CD or PS Driver CD that con-
tains the printer driver, and then click the [Open].
– Select printer driver (PCL, PostScript PPD) to be used.
Downloaded From ManualsPrinter.com Manuals 
						

							4Installation of the printer driver (Windows) (Manual installation using the Add Printer wizard)
4-14 bizhub PRO 950– For details of the built-in CD-ROM construction, see “Folder struc-
ture on the CD-ROM (bizhub PRO 950 Driver CD-ROM)” on 
page 1-6.
7Click [Next] and follow the on-screen instructions.
– If the “User Account Control” window appears, click the [Continue].
8Click the [Finish].
9When the installation is completed, make sure that the icon of the in-
stalled printer appears in the Printers window.
10Remove the CD-ROM from the CD-ROM drive.
This completes the printer driver installation.
Downloaded From ManualsPrinter.com Manuals 
						

							Installation of the printer driver (Windows) (Manual installation using the Add Printer wizard)4
bizhub PRO 950 4-15
4.3 Windows XP/Server 2003
4.3.1 Network connection (LPR/Port9100)
When using the LPR/Port9100 printing, specify the port during the printer 
driver installation process.
TCP/IP setting for this machine
Specify the IP address on TCP/IP Setting of this machine.
For details on specifying the IP address of this machine, refer to the User’s 
Guide [POD Administrator’s Reference].
RAW port number setting for the copier
To use Port9100 printing, enable the RAW port number (9100 at default), in 
the TCP/IP Setting screen of the copier.
For details on specifying the RAW port number of this machine, refer to the 
User’s Guide [POD Administrator’s Reference].
LPD setting for the copier
To use LPR printing, enable LPD print on “LPD Setting” of the copier.
For details on the LPD settings of this machine, refer to the User’s Guide 
[POD Administrator’s Reference].
Printer driver installation using the Add Printer Wizard
0The installation should be performed by a qualified system administrator 
or printer administrator.
1Insert the Driver CD into the CD-ROM drive of the computer.
2Click the [Start] button, and then click “Printers and Faxes”.
– If “Printers and Faxes” does not appear in the Start menu, open 
Control Panel from the Start menu, select “Printers and Other Hard-
ware”, and then click “Printers and Faxes”.
3For Windows XP, click “Add a printer” on the “Printer Tasks” menu.
– For Windows Server 2003, double-click the “Add Printer” icon.
The Add Printer Wizard starts.
4Click the [Next].
5Select “Local printer attached to this computer”, and then click the 
[Next].
Downloaded From ManualsPrinter.com Manuals 
						

							4Installation of the printer driver (Windows) (Manual installation using the Add Printer wizard)
4-16 bizhub PRO 950– Clear the “Automatically detect and install my Plug and Play print-
er” check box.
6Click “Create a new port”, and select “Standard TCP/IP Port” for “Type 
of port:”.
7Click the [Next].
The Add Standard TCP/IP Printer Port Wizard starts.
8Click the [Next].
9In the “Printer Name or IP address” box, enter the IP address for this 
machine, and then click the [Next].
– If the Additional Port Information Required dialog box appears, go 
to step 10.
– If the Finish dialog box appears, go to step 13.
10Select “Custom”, and then click the [Settings].
Downloaded From ManualsPrinter.com Manuals 
						

							Installation of the printer driver (Windows) (Manual installation using the Add Printer wizard)4
bizhub PRO 950 4-17
11Change the settings according to the port, and then click the [OK].
– For an LPR connection, select “LPR”, and then enter “Print” in the 
“Queue name” box.
– For a Port9100 connection, select “RAW”, and then enter the RAW 
port number (9100 at default) in the “Port Number” box.
– The information entered here is case-sensitive.
12Click the [Next].
13Click the [Finish].
The Add Printer Wizard appears.
14Click the [Have Disk].
15Click the [Browse].
16Specify the desired folder on the Driver CD or PS Driver CD that con-
tains the printer driver, and then click the [Open].
– Select printer driver (PCL, PostScript PPD) to be used.
– For details of the built-in CD-ROM construction, see “Folder struc-
ture on the CD-ROM (bizhub PRO 950 Driver CD-ROM)” on 
page 1-6.
17Click the [OK].
The “Printer” list appears.
18Click the [Next].
19Follow the on-screen instructions.
– If the “User Account Control” window appears, click the [Continue].
20Click the [Finish].
21When the installation is completed, make sure that the icon of the in-
stalled printer appears in the Printers and Faxes window.
22Remove the CD-ROM from the CD-ROM drive.
This completes the printer driver installation.
Downloaded From ManualsPrinter.com Manuals 
						

							4Installation of the printer driver (Windows) (Manual installation using the Add Printer wizard)
4-18 bizhub PRO 950
4.3.2 Network connection (SMB)
When using the SMB printing, specify the port by specifying the printer dur-
ing the printer driver installation process. Printers can be specified either by 
searching printers on the network, or by entering the printer name.
TCP/IP setting for this machine
Specify the IP address on TCP/IP Setting of this machine.
For details on specifying the IP address of this machine, refer to the User’s 
Guide [POD Administrator’s Reference].
SMB setting for the copier
In “Print Setting” in the SMB Setting screen of the copier, specify the NetBI-
OS name, print service name, and workgroup.
For details on the SMB settings of this machine, refer to the User’s Guide 
[POD Administrator’s Reference].
Printer driver installation by specifying printers using the Add Printer 
Wizard
0The installation should be performed by a qualified system administrator 
or printer administrator.
1Insert the Driver CD into the CD-ROM drive of the computer.
2Click the [Start] button, and then click “Printers and Faxes”.
– If “Printers and Faxes” does not appear in the Start menu, open 
Control Panel from the Start menu, select “Printers and Other Hard-
ware”, and then click “Printers and Faxes”.
3For Windows XP, click “Add a printer” on the “Printer Tasks” menu.
– For Windows Server 2003, double-click the “Add Printer” icon.
The Add Printer Wizard starts.
4Click the [Next].
5Select “Local printer attached to this computer”, and then click the 
[Next].
Downloaded From ManualsPrinter.com Manuals 
						

							Installation of the printer driver (Windows) (Manual installation using the Add Printer wizard)4
bizhub PRO 950 4-19– Clear the “Automatically detect and install my Plug and Play print-
er” check box.
6Click “Create a new port”, and select “Local Port” for “Type of port:”.
7In the “Enter a port name” box, enter “\\NetBIOS name\print service 
name”.
8Click the [OK].
The Add Printer Wizard appears.
9Click the [Have Disk].
10Click the [Browse].
11Specify the desired folder on the Driver CD or PS Driver CD that con-
tains the printer driver, and then click the [Open].
– Select printer driver (PCL, PostScript PPD) to be used.
Downloaded From ManualsPrinter.com Manuals