Konica Minolta magicolor 2590MF User Manual

Configuration Menu Overview 37
Use alphanumeric characters (including some symbols) for the 
SENDER NAME and DEFAULT SUBJECT. 
Using other characters will corrupt the characters for the E-mail desti-
nation. 
For details on entering/editing text and the characters that can be 
entered, refer to “Entering E-mail Addresses” on page 215.
SCANNER SETTING Menu
Manufacturer’s default settings appear in bold.
1 RESOLUTIONSetting150×150 / 300×300 / 600×600
Select the default scanning resolution for scan to...

Configuration Menu Overview 38
Downloaded From ManualsPrinter.com Manuals 

3Media Handling
Downloaded From ManualsPrinter.com Manuals 

Print Media 40
Print Media
Specifications
Media Media Size Tray* Duplex Copy Print Direct 
PrintFA X
Inch Millimeter
A4 8.2 x 11.7 210.0 x 297.0 1/2 Yes Yes Yes Yes Yes
B5 (JIS) 7.2 x 10.1 182.0 x 257.0 1 No Yes Yes Yes No
A5 5.9 x 8.3 148.0 x 210.0 1 No Yes Yes Yes No
Legal 8.5 x 14.0 215.9 x 355.6 1 No Yes Yes No Yes
Letter 8.5 x 11.0 215.9 x 279.4 1/2 Yes Yes Yes Yes Yes
Statement 5.5 x 8.5 140.0 x 216.0 1 No Yes Yes Yes No
Executive 7.25 x 10.5 184.0 x 267.0 1 No Yes Yes No No
Folio 8.3 x 13.0 210.0...

Print Media 41 Types
Before purchasing a large quantity of special media, do a trial print with the 
same media and check the print quality.
Keep media on a flat, level surface in its original wrapper until it is time to 
load it. For a list of approved media, refer to http://printer.konicaminolta.com.
Plain Paper (Recycled Paper)
Use plain paper that is
„Suitable for plain paper printers and copiers, such as standard or recycled 
office paper.
Note
Do not use the media types listed below. These could...

Print Media 42
„Wet (or damp)
Keep media between 35% and 85% relative humidity. Toner does 
not adhere well to moist or wet media.
„Layered 
„Adhesive
„Folded, creased, curled, embossed, warped, or wrinkled
„Perforated, three-hole punched, or torn 
„Too slick, too coarse, or too textured 
„Different in texture (roughness) on the front and back
„Too thin or too thick
„Stuck together with static electricity
„Composed of foil or gilt; too luminous
„Heat sensitive or cannot withstand the fusing temperature...

Print Media 43
DO NOT use thick stock that is
„Mixed with any other media in the trays (as this will cause media misfeed-
ing)
Envelope
Print on the front (address) side only. Some parts of the envelope consist of 
three layers of paper—the front, back, and flap. Anything printed in these lay-
ered regions may be lost or faded.
You can print continuously with envelope. However, this could affect the 
media feed, depending on the media quality and printing environment. If 
problems occur, stop the...

Print Media 44
Labels
A sheet of labels consists of a face sheet (the printing surface), adhesive, and 
a carrier sheet:
„The face sheet must follow the plain paper specification.
„The face sheet surface must cover the entire carrier sheet, and no adhe-
sive should come through on the surface.
You can print continuously with label sheets. However, this could affect the 
media feed, depending on the media quality and printing environment. If 
problems occur, stop the continuous printing and print one...

Print Media 45
„Are precut or perforated
Letterhead
You can print continuously with letterhead. However, this could affect the 
media feed, depending on the media quality and printing environment. If 
problems occur, stop the continuous printing and print one sheet at a time.
Try printing your data on a sheet of plain paper first to check placement.
Postcard
You can print continuously with postcard. However, this could affect the 
media feed, depending on the media quality and printing environment. If...

Print Media 46
Use postcards that are
„Approved for laser printing
DO NOT use postcards that are
„Coated
„Designed for inkjet printers
„Precut or perforated
„Preprinted or multicolored
If the postcard is warped, press on the warped 
area before putting it in Tray 1.
„Folded or wrinkled
Transparency
Do not fan transparencies before loading them. Resulting static elec-
tricity may cause printing errors.
If you touch the face of the transparencies with your bare hands, print 
quality may be affected....