LaCie 730 Users Manual

LaCie 700 Series LCD Monitors Monitor Operation
User Manual page 21
3. Monitor Operation
This  section  describes  how  to  use  the  buttons  on  the  front  of 
the monitor to control all of the monitor’s functions through the 
On  Screen  Display  (OSD).    Please  note  that  the  LaCie  730  of-
fers no On-Screen Menu. The Color and Power buttons function 
the same way as on the LaCie 720/724. The Up/Down buttons 
increase  and  decrease  overall  monitor  brightness.  Other  color 
parameters such...

LaCie 700 Series LCD Monitors Monitor Operation
User Manual page 22
Settings and Adjustments (720 3.2. 
and 724)
Auto adjustment of the monitor set-3.2.1. 
tings
When the AUTO button is pressed, the Auto Adjustment screen 
appears as shown in the animated screen on the center.
Auto adjustment allows the monitor to self-adjust to the incom -
ing  video  signal.  Fine,  coarse  and  position  values  are  adjusted 
automatically (available in analog mode only).
To make the automatic adjustment function...

LaCie 700 Series LCD Monitors Monitor Operation
User Manual page 23
3.3. OSD Functions (720 and 724)
FunctionAvailable Settings
PictureBrightness Contrast
Color Color Tone Color Control Gamma
Image Coarse FineSharpness H-Position V-Position
OSD Language H-Position V-PositionTransparency Display Time
Setup Auto Source Image Reset Color Reset Indicator
Information
Picture3.3.1. 
Brightness
You can use the on-screen menus to change the brightness ac -
cording to personal preference.
Direct Access Feature:...

LaCie 700 Series LCD Monitors Monitor Operation
User Manual page 24
Color3.3.2. 
Color Tone
The  Color  Tone  menu  adjusts  color  tones  to  your  preference. 
Use  the  up  and  down  arrow  buttons  to  adjust  the  color  tone. 
When  the  color  tone  is  balanced  between  “warm”  and  “cool” 
the adjustment value reads as “off.”
Maximum “Warm” value is 5
Maximum “Cool” value is 6.
Color Control
The  Color  Control  adjusts  individual  R,G,B  color  balance.  Use 
the up and down arrow buttons to...

LaCie 700 Series LCD Monitors Monitor Operation
User Manual page 25
3.3.3. Image
Coarse
Use the Coarse control to remove noise such as vertical stripes. 
Coarse adjustment may move the screen image area. You may 
relocate it to the center using the H-Position control menu.
NOTe: Coarse control is available in analog mode only.
Fine
Removes  noise  such  as  horizontal  stripes.  If  the  noise  persists 
even  after  fine  tuning,  repeat  it  after  adjusting  the  frequency 
(clock speed).
NOTe: Fine...

LaCie 700 Series LCD Monitors Monitor Operation
User Manual page 26
OSD3.3.4. 
Language
You can choose one of 9 languages.
English, Deutsch, Espanol, Français, Italiano, Svenska, Russian, 
Portugues, Türkçe
NOTe: The language chosen affects only the language of the 
OSD.  It  has  no  effect  on  any  software  running  on  the  com -
puter.
H-Position and V-Position
Use the H-Position and V-Position menus to change the position 
where the OSD menu appears on your monitor.
Transparency
Turn transparency...

LaCie 700 Series LCD Monitors Monitor Operation
User Manual page 27
Setup3.3.5. 
Auto Source
Select  Auto  Source  for  the  monitor  to  automatically  select  the 
signal source.
Image Reset
Image Reset returns all image parameters to factory default val-
ues.
Color Reset
Color  Reset  returns  all  color  parameters  to  factory  default  val -
ues.
Indicator
Turns all LEDs on or off. If it seems that the light from the LEDs 
affects  the  brightness  of  the  LCD,  you  can  turn  off  the  power 
to...

LaCie 700 Series LCD Monitors Troubleshooting
User Manual page 28
4. Troubleshooting
In the event that your LaCie 700 series LCD Monitor is not work-
ing  correctly,  please  refer  to  the  following  checklist  to  find  out 
where the problem is coming from. If you have gone through all 
of the points on the checklist and your monitor is still not work -
ing correctly, please have a look at the FAQs that are regularly 
published on our website – www.lacie.com. One of these FAQs 
may  provide  an...

LaCie 700 Series LCD Monitors Troubleshooting
User Manual page 29
ProblemChecklistSolutions
If the power is on and neither 
of the the above messages 
appears… …reboot the computer to see the initial screen login screen. If the 
initial login screen appears, boot the computer in Safe Mode and then 
change the frequency of the video card.
NOTe: If the initial screen (the login screen) does not appear, contact 
the Service Center or your dealer.
Is the power indicator on the 
monitor blinking at 1 second...

LaCie 700 Series LCD Monitors Troubleshooting
User Manual page 30
ProblemChecklistSolutions
The screen displays im-
ages in only 16 colors. Have the Windows display set
-
tings been set properly? Windows ME/2000/XP: Set the colors properly in 
Control Panel/
Display/Settings.
The screen colors have 
changed after changing 
the video card. Has the video card been set 
properly?
Refer to the documentation that came with your video card to set it 
properly.
Error message: “Unrec-
ognized monitor, Plug &...