LG 22m45d-b Manual

							11
ENGENGLISH
CUSTOMIZING SETTINGS
CUSTOMIZING SETTINGS
1 Press the desired button on the bottom of the Monitor set.
2 Change the value of the menu item by pressing the buttons on the bottom of the Monitor set.
To return to the upper menu or set other menu items, use the up arrow () button.
3 Select EXIT to leave the OSD menu.
Monitor set Buttons
ButtonDescription
Accesses the main menus.(See p.12)
OSD Locked/OSD UnlockedThis function allow you to lock the current control settings, so that they cannot be inadvertently changed.Press and hold the MENU button for several seconds. Then OSD of “OSD Lock” will appear. After that, user can select lock or unlock by pressing left/right button.If user selects the “Lock” icon by pressing the “OK” button,\
 the message “OSD Locked” will appear. Otherwise, “OSD Unlocked” will appear. After selecting the “Lock”, If you want to change to Unlock, you can push the “MENU” button for several seconds. The message “OSD Unlocked” will appear.
Use this button to enter Reader Mode menu. Its function works to display\
 screen as  paper-like picture for Eye comfort.If you want to more information(See \
p.17).
Use this button to enter SUPER ENERGY SAVING, Picture Mode, DUAL DISPLAY, DUAL WEB menus.(See p.18~20)
When adjusting your display settings, always press the AUTO button on the MONITOR SETUP OSD. (Only supported in Analog Mode)
The best display mode19M45A/19M45D: 1366 x 76820M45A/20M45D: 1600 x 90022M45A/22M45D/23M45D/24M45D: 1920 x 1080
You can choose the input signal.•  When two input signals are connected, you can select the input signal (D-SUB/DVI-D) you want.•  When only one signal is connected, it is automatically detected.  The default setting is      D-SUB.
EXIT
EXIT the OSD(On Screen Display).
 (Power Button)Turns the power on or off.
Power IndicatorThe power indicator stays white if the display is running properly (On Mode). If the display is in Sleep Mode, the power indicator blinks white.
MENUFUNC.AUTOINPUTEXITREADER  
						

							12
ENGENGLISH
CUSTOMIZING SETTINGS
Customizing Settings
Menu Settings
1 Press MENU button on the bottom of the Monitor set 
to display the Menu OSD.  
2 Set the options by pressing the ◄ or ► or ▼ 
buttons.
3 Select the "Next Menu" button to enter the more 
option settings. 
4 Select EXIT to leave the OSD menu.
To return to the upper menu or set other menu items, 
use the up arrow () button.
Each option is explained below.
Menu > Next MenuAnalogDigitalDescription
PictureSharpness●●To adjust the clearness of the screen
ColorGamma●●To customize the color of the screenColor Temp
DisplayHorizontal●To adjust the position of the screenVertical
Clock ●To improve the clarity and stability of the screen Phase
OthersLanguage ●●To customize the screen status for a user's operating environmentPower Indicator
 yAnalog: D-SUB(Analog signal) input.
 yDigital: DVI-D(Digital signal) input.
MenuAnalogDigitalDescription
Brightness●●To adjust the brightness of the screen Contrast●●
Wide/Original
●●
Wide
Switch to full screen mode according to input image signal.
Original
Change the input image signal ratio to original.* This function works only if input resolution is lower than Monitor set r\
atio (16:9).
Reset●●Restore all factory default settings. Press the◄ , ►buttons to reset immediately.  
						

							13
ENGENGLISH
CUSTOMIZING SETTINGS
Picture
1 Press MENU button on the bottom of the Monitor set 
to display the Menu OSD.  
2 Select the "Next Menu" button to enter the more 
option settings. 
3 Enter to Picture by pressing the ▼ button.
4 Set the options by pressing the ◄ or ► or ▼ 
buttons.
5 Select EXIT to leave the OSD menu.
To return to the upper menu or set other menu items, 
use the up arrow () button. 
Each option is explained below.
Menu > Next Menu > PictureDescription
SharpnessTo adjust the clearness of the screen.  
						

							14
ENGENGLISH
CUSTOMIZING SETTINGS
Color
1 Press MENU button on the bottom of the Monitor set 
to display the Menu OSD.  
2 Select the "Next Menu" button to enter the more 
option settings. 
3 Select Color by pressing the ► button. 
4 Enter to Color by pressing the ▼ button.
5 Set the options by pressing the ◄ or ► or ▼ 
buttons.
6 Select EXIT to leave the OSD menu.
To return to the upper menu or set other menu items, 
use the up arrow () button.
Each option is explained below.
Menu > Next Menu > ColorDescription
GammaSet your own gamma value. : Gamma 0, Gamma 1, Gamma 2 on the monitor, high gamma values display whitish images and low gamma values display blackish images.
Color TempCustom
• Red:Set your own red color levels. • Green: Set your own green color levels. • Blue:Set your own blue color levels.
Select the screen color.  Warm: Set the screen to warm color temperature (more red).    Medium: Set the screen to medium color temperature.    Cool: Set the screen to cool color temperature (more blue).  
						

							15
ENGENGLISH
CUSTOMIZING SETTINGS
Display
1 Press MENU button on the bottom of the Monitor set 
to display the Menu OSD.  
2 Select the "Next Menu" button to enter the more 
option settings. 
3 Select Display by pressing the ► button. 
4 Enter to Display by pressing the ▼ button.
5 Set the options by pressing the ◄ or ► or ▼ 
buttons.
6 Select EXIT to leave the OSD menu.
To return to the upper menu or set other menu items, 
use the up arrow () button.
Each option is explained below.
Menu > Next Menu > Display Description
HorizontalTo move image left and right. 
Vertical To move image up and down.
ClockTo minimize any vertical bars or stripes visible on the screen background\
.The horizontal screen size will also change.
PhaseTo adjust the focus of the display. This item allows you to remove any horizontal noise and clear or sharpen the image of characters.  
						

							16
ENGENGLISH
CUSTOMIZING SETTINGS
Others
1 Press MENU button on the bottom of the Monitor set 
to display the Menu OSD.  
2 Select the "Next Menu" button to enter the more 
option settings. 
3 Select Others by pressing the ► button. 
4 Enter to Others by pressing the ▼ button.
5 Set the options by pressing the ◄ or ► or ▼ 
buttons.
6 Select EXIT to leave the OSD menu.
To return to the upper menu or set other menu items, 
use the up arrow () button.
Each option is explained below.
Menu > Next Menu > OthersDescription
LanguageTo choose the language in which the control names are displayed.
Power IndicatorUse this function to set the power indicator on the bottom side of the m\
onitor to On or Off.If you set Off, it will go off.If you set On at any time, the power indicator will automatically be tur\
ned on.  
						

							17
ENGENGLISH
CUSTOMIZING SETTINGS
READER Setting
1 Press  READER button on the bottom of the Monitor 
set to display the Reader Mode OSD.  
2 Set the options by pressing the ◄ buttons.
Reader ModeDescription
Reader 1It is a mode that the screen is adjusted to the best for the newspaper. If you want screen more bright, you can control brightness in Menu OSD.
Reader 2It is a mode that the screen is adjusted to the best for the cartoon. If\
 you want screen more bright, you can control brightness in Menu OSD.
Reader OffIt is a mode that reader mode is off.
Each option is explained below.
 
NOTE
If option of Reader Mode is Reader 1 or Reader 2, Picture Mode will auto\
matically be  Custom and 
Super Energy Saving will automatically be Off.  
						

							18
ENGENGLISH
CUSTOMIZING SETTINGS
SUPER ENERGY SAVING 
1   Press FUNC. button on the bottom of the Monitor set to 
display the FUNC. OSD. 
2 Enter to SUPER ENERGY SAVING by pressing the ▼ 
button.
3 Set the options by pressing the ◄ or ► or ▼buttons.
4 Select EXIT to leave the OSD menu.To return to the 
upper menu or set other menu items, use  the up arrow 
() button.
Each option is explained below.
SUPER ENERGY SAVINGDescription
HighEnables SUPER ENERGY SAVING you can save energy with this energy- high efficient function.
LowEnables SUPER ENERGY SAVING you can save energy with this energy- low efficient function.
OffDisables SUPER ENERGY SAVING.
  yTOTAL POWER REDUCTION: How much power is saved while using the monitor.
 yTOTAL CO2 REDUCTION: Change the TOTAL POWER REDUCTION to CO2.
 ySAVING DATA(W/h)
470 mm
(18.5 inch)
495 mm 
(19.5 inch)
546 mm 
(21.5 inch)
584 mm 
(23 inch)
600 mm 
(23.6 inch)
SUPER SAVING(High)2 W/h3 W/h4 W/h4 W/h4 W/h
SUPER SAVING(Low)1 W/h1 W/h2 W/h2 W/h2 W/h
 ySaving Data depends on the Panel. So,those values should be different from each panel and panel 
vendor.If option of Super Energy Saving is High or Low, monitor luminance become higher or lower 
depend on source.
 yLG calculated these values by using “broadcast video signal”
(including broadcast video: IEC 62087)
 ySUPER SAVING refers to how much power can be saved using the SUPER ENERGY SAVING 
function.
 yIf option of Super Energy Saving is High or Low, Picture Mode will automatically be Custom and 
Reader Mode will automatically be Reader Off.
NOTE
FUNC. Setting  
						

							19
ENGENGLISH
CUSTOMIZING SETTINGS
Picture Mode
1 Press FUNC. button on   the bottom of the  Monitor set 
to display the FUNC. OSD. 
2 Select Picture Mode by pressing the ► button.   
3 Enter to Picture Mode by pressing the ▼ button. 
4 Set the options by pressing the ◄ or ► buttons.
5   Select EXIT to leave the OSD menu.To return to the 
upper menu or set other menu items, use   the up 
arrow()button.  
Picture ModeDescription
CustomIt is a mode that the user can adjust each element.  It can adjust the color mode of the Main Menu.
TextIt is a mode that the screen is adjusted to the best for the textworks.
PhotoIt is a mode that the screen is adjusted to the best to view pictures.
CinemaIt is a mode that the screen is adjusted to the best to view the videos.
GameIt is a mode that the screen is adjusted to the best to play a game.
Each option is explained below.
 
NOTE
If option of Picture Mode is non-Custom , Reader Mode will automatically\
 be Reader Off and Super 
Energy Saving will automatically be Off.  
						

							20
ENGENGLISH
CUSTOMIZING SETTINGS
 
NOTE
 yWhen monitor goes to power saving mode with pc saving option-> Pressing \
any button -> OSD 
appear and user should press dual button -> User can bring back to norma\
l mode.
DUAL DISPLAY
1   Press FUNC. button on the bottom of the Monitor set 
to display the FUNC. OSD. 
2 Select DUAL DISPLAY by pressing the ► button. 
3 Enter to DUAL DISPLAY by pressing the ▼ button.
4 Set the options by pressing the ◄ or ► buttons.
5 Select EXIT to   leave the OSD menu.To return to the 
upper menu or set other menu items, use  the up 
arrow () button.
* Before using below functions, please install DUAL SMART SOLUTION programme.
Each option is explained below.
DUAL DISPLAYDescription
CloneBy selecting Clone,user can use secondary monitor as done mode of primar\
y monitor.
ExtendedBy selecting Extended,user can use secondary monitor as extended mode of\
 primary monitor.
OffIf select Off,DUAL DISPLAY is off.
DUAL WEB
1   Press FUNC. button on the bottom of the Monitor set 
to display the FUNC. OSD. 
2 Select DUAL WEB by pressing the ► button. 
3 Enter to DUAL WEB by pressing the ▼ button.
4 Set the options by pressing the ◄ or ► buttons.
5 Select EXIT to   leave the OSD menu.To return to the 
upper menu or set other menu items, use  the up 
arrow () button.
* Before using below functions, please install DUAL SMART SOLUTION programme.
Each option is explained below.
DUAL WEBDescription
OnHelp user to browse web efficiently by dividing in half. Help to arrange and move windowson screen. Help user to control dividedwindows ratio. 
OffIf select Off,DUAL WEB is off.