LG 22mp55hqp User Manual
Have a look at the manual LG 22mp55hqp User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 1069 LG manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
www.lg.com OWNER’S MANUAL IPS LED MONITOR 22MP55HQ 23MP55HQ 24MP55HQ 27MP55HQ P\fease \bead this manua\f ca\befu\f\fy befo\be ope\bating you\b set and \betain it fo\b futu\be \befe\bence. \fPS LED MON\fTOR MODEL ENGLISH
2 ENGENGLISH TABLE OF CONTENTS CONTENTS 3 ASSEMBLING AND PREPAR- ING 3 Unpacking 4 Parts and buttons 5 Moving and Lifting the Monitor 6 Setting up the Monitor set 6 - Attaching the Stand Base 7 - Detaching the Stand Base 8 - Mounting on a table 8 - Using the cable holder 10 - Mounting on a wall 11 USING THE MONITOR SET 11 Connecting to a PC 11 - D-SUB connection 11 - HDMI connection 12 Connecting to AV Devices 12 - HDMI connection 13 CUSTOMIZING SETTINGS 14 Customizing Settings 14 - Menu Settings 15 - Picture 16 - Color 17 - Display 17 - Audio 18 - Others 19 READER Setting 20 FUNC. Setting 20 - SUPER ENERGY SAVING 21 - Picture Mode 22 - SUPER RESOLUTION + 23 - DUAL DISPLAY 23 - DUAL WEB 24 TROUBLESHOOTING 26 SPECIFICATIONS 26 22MP55HQ 27 23MP55HQ 28 24MP55HQ 29 27MP55HQ 30 Preset Modes (Resolution) 30 Indicator 31 PROPER POSTURE 31 Proper posture for using the Monitor set.
3 ENGENGLISH ASSEMBLING AND P\fEPA\fING ASSEMBLING AND PREPARING Unpacking Check your product box for the following items. If there are any missing accessories, contact the local dealer where you purchased your product. The illustrations in this manual may differ from the actual product and accessories. yyDo not use any unapproved accessories to ensure the safety and product life span. yyAny damages or injuries by using unapproved accessories are not covered by the warranty. yyThe accessories supplied with your product may vary depending on the model. yyProduct specifications or contents in this manual may be changed without prior notice due to upgrade of product functions. CAUTION NOTE Stand Body (22MP55HQ/ 23MP55HQ /24MP55HQ) Stand Base CD(Owner's Manual) / Card D-SUB Cable (This cable is not included in all countries.) ( Depending on the country )( Depending on the country ) Power CordAC-DC AdapterAC-DC Adapter or Stand BodyTwo Screws HDMI Cable (This cable is not included in all countries.)
4 ENGENGLISH ASSEMBLING AND P\fEPA\fING Parts and buttons READER READER Power Indicator yyLighting On: Turned on yyLighting Off: Turned off Connection panel (See p.11) Button (See p.13) (Power Button)
5 ENGENGLISH ASSEMBLING AND P\fEPA\fING Moving and Lifting the Monitor When moving or lifting the monitor, follow these instructions to prevent the monitor from being scratched or damaged and to ensure safe trans- portation regardless of its shape or size. yyAs far as possible, avoid touching the moni- tor screen. This may result in damage to the screen or some of the pixels used to create images. yyIt is advisable to place the monitor in the original box or packing material before at- tempting to move it. yyBefore moving or lifting the monitor, discon- nect the power cord and all cables. yyHold the top and bottom of the monitor frame firmly. Do not hold the panel itself. yyWhen holding the monitor, the screen should face away from you to prevent it being scratched. yyWhen moving the monitor, avoid any strong shock or vibrations to the product. yyWhen moving the monitor, keep it upright, never turn the monitor on its side or tilt it sideways. CAUTION
6 ENGENGLISH ASSEMBLING AND P\fEPA\fING Attach the Stand Body to the monitor set. Attach the Stand Base. Tighten the screw to the right. Setting up the Monitor set Attaching the Stand Base 1 Place the Monitor set with the screen side down on a flat and cushioned surface. Lay a foam mat or soft protective cloth on the surface to protect the screen from damage. CAUTION 2 Stand Base Stand Body 1 2 3 \b\bMP55HQ/ \b3MP55HQ /\b4MP55HQ \b7MP55HQ Attach the Stand Body to the monitor set. Use two screws to fix the Stand Body and monitor set. Attach the Stand Base. Tighten the screw to the right . 1 2 3 4 Stand Body Stand Body Stand Base
\b ENGENGLISH ASSEMBLING AND P\fEPA\fING Detaching the Stand Base 1 Place the Monitor set with the screen side down on a flat and cushioned surface. Stand Base Stand Base Stand Body Stand Body 2 Pull out the Stand Body and Stand Base from the monitor set. Turn the screw to the left. Pull out the Stand Base. 1 2 3 yyThis illustration depicts the general model of connection. Your monitor may differ from the items shown in the picture. yyDo not carry the product upside down holding only the stand base. The product may fall and get damaged or injure your foot. CAUTION \b\bMP55HQ/ \b3MP55HQ /\b4MP55HQ \b7MP55HQ Turn the screw to the left. Pull out the Stand Base from the Stand Body. Remove two screws and pull out the Stand Body from the monitor set. 1 2 3 Stand Body Stand Body Stand Base
8 ENGENGLISH ASSEMBLING AND P\fEPA\fING Mounting on a table 1 Lift and tilt the Monitor set into its upright position on a table. Leave a 10 cm (minimum) space from the wall for proper ventilation. 2 Connect the AC-DC Adapter and Power Cord to a wall outlet. 3 Press (Power) button on the bottom switch panel to turn the power on. 10 cm 10 cm 10 cm 10 cm Unplug the power cord before moving the Monitor to another location. Otherwise electric shock may occur. CAUTION or Using the cable holder Cable holder
9 ENGENGLISH ASSEMBLING AND P\fEPA\fING Using the Kensington security system The Kensington security system connector is located at the back of the Monitor set. For more information of installation and using, refer to the manual supplied with the Kensington security system or visit http://www.kensington.com. Connect the Kensington security system cable between the Monitor set and a table. The Kensington security system is optional. You can obtain it from most electronics stores. NOTE When you adjust the angle, do not hold the bottom of the Monitor set frame as shown on the following illustration, as may injure your fingers. Do not touch or press the screen when adjusting the angle of the monitor. WARNING Tilt from +20 to -3 degrees up or down to adjust the angle of the Monitor set to suit your view. Tilt from +20 to -5 degrees up or down to adjust the angle of the Monitor set to suit your view. NOTE NOTE Front Front Rear Rear Do not hold this set like below picture.Monitor screen can detach from stand base and injure your body. \b\bMP55HQ/\b3MP55HQ/\b4MP55HQ \b7MP55HQ
10 ENGENGLISH ASSEMBLING AND P\fEPA\fING Mounting on a wall For proper ventilation, allow a clearance of 10 cm on each side and from the wall. Detailed instructions are available from your dealer, see the optional Tilt Wall Mounting Bracket Installation and Setup Guide. If you intend to mount the Monitor set to a wall, attach Wall mounting interface (optional parts) to the back of the set. When you install the Monitor set using a wall mounting interface (optional parts), attach it carefully so it will not drop. 1 Please, Use the screw and wall mount interface in accordance with VESA Standards. 2 If you use screw longer than standard, the monitor might be damaged internally. 3 If you use improper screw, the product might be damaged and drop from mounted position. In this case, LG Electronics is not responsible for it. 4 VESA compatible only with respect to screw mounting interface dimensions and mounting screw specifications. 5 Please use VESA standard as below. yy784.8 mm (30.9 inch) and under * Wall Mount Pad Thickness : 2.6 mm * Screw : Φ 4.0 mm x Pitch 0.7 mm x Length 10 mm yy787.4 mm (31.0 inch) and above * Please use VESA standard wall mount pad and screws. 10 cm 10 cm 10 cm10 cm yyDisconnect the power cord first, and then move or install the Monitor set. Otherwise electric shock may occur. yyIf you install the Monitor set on a ceiling or slanted wall, it may fall and result in severe injury. yyUse only an authorized LG wall mount and contact the local dealer or qualified personnel. yy Do not over tighten the screws as this may cause damage to the Monitor set and void your warranty. yy Use only screws and wall mounts that meet the VESA standard. Any damages or injuries by misuse or using an improper accessory are not covered by the warranty. yyScrew length from outer surface of back cover should be under 8mm. yyUse the screws that are listed on the VESA standard screw specifications. yyThe wall mount kit will include an installation manual and necessary parts. yyThe wall mount bracket is optional. You can obtain additional accessories from your local dealer. yyThe length of screws may differ depending on the wall mount. Be sure to use the proper length. yyFor more information, refer to the instructions supplied with the wall mount. CAUTION NOTE Model\b\bMP55HQ \b3MP55HQ VESA (A x B)75 x 75100 x 100 Standard screwM4 Number of screws4 \b4MP55HQ \b7MP55HQ Back Cover Wall mount Pad Wall mount Pad Back Cover Standard screw Max.8mm