LG 22mp55hqp User Manual

							11
ENGENGLISH
USING THE MONITO\f SET
USING	THE	MONITOR	SET
Connecting	to	a	PC
yyYour	Monitor	set	supports	Plug	&	Play*.	
*Plug	&	Play:		A	PC	recognizes	a	connected	
device	that	users	connect	to	a	PC	and	turn	
on,	without	device	configuration	or	user	
intervention.
D-SUB	connection
Transmits	analog	video	from	your	PC	to	the	
Monitor	set.	Connect	the	PC	and	the	Monitor	set	
with	the	supplied	D-sub	15	pin	signal	cable	as	
shown	in	the	following	illustrations.
yyMac	adapter
For	 Apple	Macintosh	use,	a	separate	plug	
adapter	is	needed	to	change	the	15	pin	
high	density	(3	row)	D-SUB	VGA 	connector	
on	the	supplied	cable	to	a	15	pin	2	row	
connector.
yyWhen	using	a	D-Sub	signal	input	cable	
connector	for	Macintosh
NOTE
HDMI	connection
Transmits	the	digital	video	and	audio	signals	from	
your	PC	or	A/V	to	the	Monitor	set.	Connect	the	PC	
or	A/V	and	the	Monitor	set	with	the	HDMI	cable	as	
shown	in	the	following	illustrations.
yyIf	you 	use 	HDMI 	PC, 	it 	can 	cause 	compatibility	
problem.
NOTE
yyConnect	the	signal	input	cable	and	
tighten	it	by	turning	the	screws	
clockwise.
yyDo	not	press	the	screen	with	your	
finger	for		a	long	time	as	this	may	result	in	
temporary	distortion	on	the	screen.
yyAvoid	displaying	a	fixed	image	on	the	
screen	for	a	long	period	of	time	to	prevent	
image	burn.	Use	a	screensaver	if	possible.
CAUTION
yyWhen	you	want	to	use	two	PC	in	our	Monitor,	
please	connect	the	signal	cable(D-SUB/
HDMI)	respectively	in	Monitor	set.
yyIf	you	turn	the	Monitor	set	on	while	it	is	cold,	
the	screen	may	flicker.	 This		is	normal.
yySome	red,	green,	or	blue	spots	may	appear	
on	the	screen.	This	is	normal.
NOTE  
						

							12
ENGENGLISH
USING THE MONITO\f SET
yy"Self	Image	Setting"	Function.
This	function	provides	the	user	with	optimal	
display	settings.When	the	user	connects	
the	monitor	for	the	first	time,	this	function	
automatically	adjusts	the	display	to	optimal	
settings	for	individual	input	signals.(Only	
supported	in	Analog	Mode)
yy‘AUTO’	Function.
When	you	encounter	problems	such	as	
blurry	screen,	blurred	letters,	screen	flicker	
or	tilted	screen	while	using	the	device	or	
after	changing	screen	resolution,	press	the	
AUTO	function	button	to	improve	resolution.
(Only	supported	in	 Analog	Mode)
NOTE
Self	Image	Setting	Function
Press	the	power	button	on	the	bottom	panel	to	
turn	the	power	on.	When	monitor	power	is	turned	
on,	the	"Self	Image	Setting"	Function	is	executed	
automatically.	(Only	supported	in	 Analog	Mode)
Connecting	to	AV	Devices
HDMI	connection
Transmits	the	digital	video	and	audio	signals	from	
your	PC	and	A/V	devices	to	the	monitor.	Connect	
your	PC	and	AV	device	to	the	monitor	with	the	
HDMI	cable	as	illustrated	below.
yyUsing	a	DVI	to	HDMI	cable	may	cause	com-
patibility	issues.
NOTE  
						

							13
ENGENGLISH
CUSTOMIZING SETTINGS
CUSTOMIZING	SETTINGS
1	 Press	the	desired	button	on	the	bottom	of	the	Monitor	set.
2	 Change	the	value	of	the	menu	item	by	pressing	the	buttons	on	the	bottom	of	the	Monitor	set.
To	return	to	the	upper	menu	or	set	other	menu	items,	use	the	up	arrow	()	button.
3	 Select	EXIT	to	leave	the	OSD	menu.
Monitor	set	Buttons
ButtonDescription
Accesses	the	main	menus.(See	p.14)
OSD	Locked/OSD	UnlockedThis	function	allow	you	to	lock	the	current	control	settings,	so	that	they	cannot	be	inadvertently	changed.Press	and	hold	the	MENU	button	for	several	seconds.	Then	OSD	of	“OSD	Lock”	will	appear.	After	that,	user	can	select	lock	or	unlock	by	pressing	left/right	button.If	user	selects	the	“Lock”	icon	by	pressing	the	“OK”	button,	the	message	“OSD	Locked”	will	appear.	Otherwise,	“OSD	Unlocked”	will	appear.	After	selecting	the	“Lock”,	If	you	want	to	change	to	Unlock,	you	can	push	the	“MENU”	button	for	several	seconds.	The	message	“OSD	Unlocked”	will	appear.
Use	this	button	to	enter	Reader	Mode	menu.	Its	function	works	to	display	screen	as		paper-like	picture	for	Eye	comfort.If	you	want	to	more	information(See	p.19).
Use	this	button	to	enter	SUPER	ENERGY 	SAVING,	Picture	Mode,	SUPER	RESOLUTION+,	DUAL	DISPLAY,	DUAL	WEB	menus.(See	p.20~23)
When	adjusting	your	display	settings,	always	press	the	 AUTO	button	on	the	MONITOR	SETUP	OSD.	(Only	supported	in	 Analog	Mode)
The	best	display	mode1920	x	1080
You	can	choose	the	input	signal.•	When	two	input	signals	are	connected,	you	can	select	the	input	signal	(D-SUB/HDMI)	you	want.•	When	only	one	signal	is	connected,	it	is	automatically	detected.	 The	default	setting	is						D-SUB.
EXIT
EXIT	the	OSD(On	Screen	Display).
	(Power	Button)Turns	the	power	on	or	off.
Power	IndicatorThe	power	indicator	stays	white	if	the	display	is	running	properly	(On	Mode).	If	the	display	is	in	Sleep	Mode,	the	power	indicator	blinks	white.  
						

							14
ENGENGLISH
CUSTOMIZING SETTINGS
Customizing	Settings
Menu	Settings
1	 Press	MENU	button	on	the	bottom	of	the	Monitor	set	
to	display	the	Menu	OSD.		
2	 Set	the	options	by	pressing	the	◄	or	►	or	▼	
buttons.
3	 Select	the	"Next	Menu"	button	to	enter	the	more	
option	settings.	
4	 Select	EXIT	to	leave	the	OSD	menu.
To	return	to	the	upper	menu	or	set	other	menu	items,	
use	the	up	arrow	()	button.
Each	option	is	explained	below.
MenuAnalogHDMIDescription
Brightness●●To	adjust	the	brightness,	contrast	of	the	screen.	Contrast●●
Response	Time●●You	can	set	a	response	time	for	displayed	pictures	based	on	the	speed	of	the	screen.	For	a	normal	environment,	it	is	recommended	that	you	use	'Off'.	For	a	fast-moving	picture,	it	is	recommended	that	you	use	'High'.
Wide/Original
●●
Wide
Switch	to	full	screen	mode	according	to	input	image	signal.
Original
Change	the	input	image	signal	ratio	to	original.*	This	function	works	only	if	input	resolution	is	lower	than	Monitor	set	ratio	(16:9).
Reset●●Restore	all	factory	default	settings.	Press	the◄	,	►buttons	to	reset	immediately.
Menu	>	Next	MenuAnalogHDMIDescription
PictureSharpness●●To	adjust	the	clearness	of	the	screen
Black	Level●To	set	offset	level
Over	Scan●To	improve	the	clarity	and	stability	of	the	screen	
ColorGamma
●●To	customize	the	color	of	the	screenColor	Temp
Six	Color
Color	Reset
DisplayHorizontal●To	adjust	the	position	of	the	screenVertical
Clock	●To	improve	the	clarity	and	stability	of	the	screen	Phase
AudioVolume●To	adjust	the	volume
OthersLanguage	●●To	customize	the	screen	status	for	a	user's	operating	environmentPower	Indicator
Automatic	Standby●●
yyAnalog:	D-SUB(Analog	signal)	input.
yyHDMI:	HDMI(Digital	signal)	input.	  
						

							15
ENGENGLISH
CUSTOMIZING SETTINGS
Picture
1	 Press	MENU	button	on	the	bottom	of	the	Monitor	set	
to	display	the	Menu	OSD.		
2	 Select	the	"Next	Menu"	button	to	enter	the	more	
option	settings.	
3	 Enter	to	Picture	by	pressing	the	▼	button.
4	 Set	the	options	by	pressing	the	◄	or	►	or	▼	
buttons.
5	 Select	EXIT	to	leave	the	OSD	menu.
To	return	to	the	upper	menu	or	set	other	menu	items,	
use	the	up	arrow	()	button.	
Each	option	is	explained	below.
Menu	>	Next	Menu	>	PictureDescription
SharpnessTo	adjust	the	clearness	of	the	screen.
Black	LevelYou	can	set	the	offset	level.	If	you	select	'High',	the	screen	will	be	bright	and	if	you	select	‘Low’,	the	screen	will	be	dark.(only	for	HDMI	input)*	Offset?As	the	criteria	for	video	signal,	it	is	the	darkest	screen	the	monitor	can	show.	
Over	ScanTo	select 	the 	range 	of 	output 	image 	for 	DTV 	timing 	in 	HDMI 	input.(only 	for 	HDMI	input)Recommend	overscan	function	to	turn	on	when	connect	 AV	equipment.  
						

							16
ENGENGLISH
CUSTOMIZING SETTINGS
Color
1	 Press	MENU	button	on	the	bottom	of	the	Monitor	set	
to	display	the	Menu	OSD.		
2	 Select	the	"Next	Menu"	button	to	enter	the	more	
option	settings.	
3	 Select	Color	by	pressing	the	►	button.	
4	 Enter	to	Color	by	pressing	the	▼	button.
5	 Set	the	options	by	pressing	the	◄	or	►	or	▼	
buttons.
6	 Select	EXIT	to	leave	the	OSD	menu.
To	return	to	the	upper	menu	or	set	other	menu	items,	
use	the	up	arrow	()	button.
Each	option	is	explained	below.
Menu	>	Next	Menu	>	ColorDescription
GammaSet	your	own	gamma	value.	:	Gamma	0,	Gamma	1,	Gamma	2	on	the	monitor,	high	gamma	values	display	whitish	images	and	low	gamma	values	display	blackish	images.
Color	TempCustom
•	Red:Set	your	own	red	color	levels.	•	Green:	Set	your	own	green	color	levels.	•	Blue:Set	your	own	blue	color	levels.
Select	the	screen	color.		Warm:	Set	the	screen	to	warm	color	temperature	(more	red).				Medium:	Set	the	screen	to	medium	color	temperature.				Cool:	Set	the	screen	to	cool	color	temperature	(more	blue).
Six	ColorSets	and	stores	the	hue	and	saturation	for	six	colors(Red/Green/Blue/Cyan/Magenta/Yellow)	to	satisfy	the	color	requirements	of	a	user.				
HueAdjusts	the	screen	hue.
SaturationAdjusts	the	color	sharpness	on	the	screen.	Lower	values	make	the	color	sharpness	weaker	and	colors	lighter	while	higher	values	make	the	color	sharpness	stronger	and	colors	dark.
Color	ResetResets	the	color	settings	to	the	factory	default	settings	for	the	current	input	device.		  
						

							1\b
ENGENGLISH
CUSTOMIZING SETTINGS
Display
1	 Press	MENU	button	on	the	bottom	of	the	Monitor	set	
to	display	the	Menu	OSD.		
2	 Select	the	"Next	Menu"	button	to	enter	the	more	
option	settings.	
3	 Select	Display	by	pressing	the	►	button.	
4	 Enter	to	Display	by	pressing	the	▼	button.
5	 Set	the	options	by	pressing	the	◄	or	►	or	▼	
buttons.
6	 Select	EXIT	to	leave	the	OSD	menu.
To	return	to	the	upper	menu	or	set	other	menu	items,	
use	the	up	arrow	()	button.
Each	option	is	explained	below.
Menu	>	Next	Menu	>	Display	Description
HorizontalTo	move	image	left	and	right.	
Vertical	To	move	image	up	and	down.
ClockTo	minimize	any	vertical	bars	or	stripes	visible	on	the	screen	background.The	horizontal	screen	size	will	also	change.
PhaseTo	adjust	the	focus	of	the	display.	 This	item	allows	you	to	remove	any	horizontal	noise	and	clear	or	sharpen	the	image	of	characters.
Each	option	is	explained	below.
Menu	>	Next	Menu	>	AudioDescription
Volume	To	adjust	the	Volume	of	headphone/earphone.(Only	for	HDMI	input)
Audio
1	 Press	MENU	button	on	the	bottom	of	the	Monitor	set	
to	display	the	Menu	OSD.		
2	 Select	the	"Next	Menu"	button	to	enter	the	more	
option	settings.	
3	 Select	Audio	by	pressing	the	►	button.	
4	 Enter	to	Volume	by	pressing	the	▼	button.
5	 Set	the	options	by	pressing	the	◄	or	►	buttons.
6	 Select	EXIT	to	leave	the	OSD	menu.
To	return	to	the	upper	menu	or	set	other	menu	items,	
use	the	up	arrow	()	button.  
						

							18
ENGENGLISH
CUSTOMIZING SETTINGS
Others
1	 Press	MENU	button	on	the	bottom	of	the	Monitor	set	
to	display	the	Menu	OSD.		
2	 Select	the	"Next	Menu"	button	to	enter	the	more	
option	settings.	
3	 Select	Others	by	pressing	the	►	button.	
4	 Enter	to	Others	by	pressing	the	▼	button.
5	 Set	the	options	by	pressing	the	◄	or	►	or	▼	
buttons.
6	 Select	EXIT	to	leave	the	OSD	menu.
To	return	to	the	upper	menu	or	set	other	menu	items,	
use	the	up	arrow	()	button.
Each	option	is	explained	below.
Menu	>	Next	Menu	>	OthersDescription
LanguageTo	choose	the	language	in	which	the	control	names	are	displayed.
Power	IndicatorUse	this	function	to	set	the	power	indicator	on	the	bottom	side	of	the	monitor	to	On	or	Off.If	you	set	Off,	it	will	go	off.If	you	set	On	at	any	time,	the	power	indicator	will	automatically	be	turned	on.
Automatic	StandbyIf	you 	do 	not 	press 	any 	button 	on 	the 	monitor 	set 	for 	a 	certain 	period, 	the 	monitor	set	will	automatically	switch	to	standby	mode.  
						

							19
ENGENGLISH
CUSTOMIZING SETTINGS
READER	Setting
1	 Press		READER	button	on	the	bottom	of	the	Monitor	
set	to	display	the	Reader	Mode	OSD.		
2	 Set	the	options	by	pressssing	the	◄	buttons.
Reader	ModeDescription
Reader	1It	is	a	mode	that	the	screen	is	adjusted	to	the	best	for	the	newspaper.	If	you	want	screen	more	bright,	you	can	control	brightness	in	Menu	OSD.
Reader	2It	is	a	mode	that	the	screen	is	adjusted	to	the	best	for	the	cartoon.	If	you	want	screen	more	bright,	you	can	control	brightness	in	Menu	OSD.
Reader	OffIt	is	a	mode	that	reader	mode	is	off.
Each	option	is	explained	below.
	
NOTE
If	option	of	Reader	Mode	is	Reader	1	or	Reader	2,	Picture	Mode	will	automatically	be		Custom	and	
Super	Energy	Saving	will	automatically	be	Off.  
						

							20
ENGENGLISH
CUSTOMIZING SETTINGS
SUPER	ENERGY	SAVING	
1			Press	FUNC.	button	on	the	bottom	of	the	Monitor	set	to	
display	the	FUNC.	OSD.	
2	 Enter	to	SUPER	ENERGY	SAVING	by	pressing	the	▼	
button.
3	 Set	the	options	by	pressing	the	◄	or	►	or	▼buttons.
4	 Select	EXIT	to	leave	the	OSD	menu.To	return	to	the	
upper	menu	or	set	other	menu	items,	use	the	up	arrow	
()	button.
Each	option	is	explained	below.
SUPER	ENERGY	SAVINGDescription
HighEnables	SUPER	ENERGY 	SAVING	you	can	save	energy	with	this	energy-	high	efficient	function.
LowEnables	SUPER 	ENERGY 	SAVING 	you 	can 	save 	energy 	with 	this 	energy- 	low 	efficient 	function.
OffDisables	SUPER	ENERGY 	SAVING.
	yyTOTAL	POWER	REDUCTION:	How	much	power	is	saved	while	using	the	monitor.
yyTOTAL	CO2	REDUCTION:	Change	the	 TOTAL	POWER	REDUCTION	to	CO2.
yySAVING	DATA(W/h)
546	mm	
(21.5	inch)
584	mm	
(23	inch)
604	mm	
(23.8	inch)
685	mm
(27	inch)
SUPER	SAVING(High)4	W/h4	W/h4	W/h6	W/h
SUPER	SAVING(Low)2	W/h2	W/h2	W/h3	W/h
yySaving	Data	depends	on	the	Panel.	So,those	values	should	be	different	from	each	panel	and	panel	
vendor.If	option	of	Super	Energy	Saving	is	High	or	Low,	monitor	luminance	become	higher	or	lower	
depend	on	source.
yyLG	calculated	these	values	by	using	“broadcast	video	signal”
(including	broadcast	video:	IEC	62087)
yySUPER	SAVING	refers	to	how	much	power	can	be	saved	using	the	SUPER	ENERGY 	SAVING	
function.
yyIf	option	of	Super	Energy	Saving	is	High	or	Low,	Picture	Mode	will	automatically	be	Custom	and	
Reader	Mode	will	automatically	be	Reader	Off.
NOTE
FUNC.	Setting