LG Lucid 3 Owners Manual

9The Basics
Setting Up Your Phone
Step 1. Remove the Back Cover
Place your fingernail in the USB/Charging Port at the bottom of the ph\
one 
and pop the back cover off the phone.
Step 2. Insert the Battery
Insert the battery in its compartment, making sure to align the gold 
contacts. Press down gently to secure the battery.  

10The Basics
Step 3. Replace the Back Cover
Place the cover over the back of the phone, then press down along the 
edges to secure the cover.
Step 4. Charge the Phone
Before turning on your phone, fully charge the battery. Be sure to use the 
USB Cable and Charger Adapter that came with your phone. Correctly 
orient the USB Cable plug before inserting it in the USB/Charging Port t\
o 
avoid damage to your phone. See 
Charging the phone on pages 13 & 14 
for more information.
 NOTE  It’s important to...

11The Basics
Removing the Battery and SIM Card
Removing the battery
1. Turn the phone off and insert your fingernail in the USB/Charging Port \
at the 
bottom of the phone, then gently pop the back cover off to remove it.
2.  Use the fingertip cutout at the bottom of the battery compartment to l\
ift the battery out. 

12The Basics
Removing the SIM card
The SIM card is pre-installed in your smartphone. If you need to replace\
 
your SIM card, consult the following instructions.
1.  Turn the phone off, then remove the back cover and the battery (as  demonstrated in the previous instructions).
2.  Locate the slot for the SIM card (the lower of two slots under the back\
  cover) and gently slide the SIM card out to remove it.
 CAUTION   If the microSD card is installed in your phone, please remove it from th\
e upper slot...

13The Basics
To remove the microSD card
1.  Unmount the microSD card. 
   From the Home screen, tap the 
Menu Key  > Settings > Storage > Unmount SD 
card.
2.  Remove the back cover and locate the microSD  card slot (as demonstrated in the previous 
instructions).
3.  Carefully pull the microSD card out to remove it.
To unmount the microSD card
It’s important to unmount the microSD card prior to removing it from the 
phone to avoid damage to it or the data saved on the card. 
1.  From the Home screen,...

14The Basics
2.  The USB/Charging Port is located on the bottom of the phone. Correctly orient the plug with the port before plugging it in. As shown below, the 
USB logo on the cable will face upward.
3.  Plug the adapter into an electrical outlet to begin charging.
Charging with the USB Cable
USB Cable
NOTE  Make sure to correctly orient the 
plug with the port before plugging it in.  
When the phone is facing upward, the USB 
logo on the cable will also face upward.
You can use your computer to charge...

15The Basics
 Use the Battery saver feature (accessed in the Settings menu) to contr\
ol 
data activity, Wi-Fi connection, Bluetooth connection, and power used for 
the phone such as screen brightness and notification light.
 NOTE  Allowing other devices to use your device's hotspot connection will drai\
n your battery 
more quickly .
To check the battery charge level
From the Home screen, tap the Menu Key  > Settings > Battery.
  The battery level (as a percentage of fully charged) and the battery...

16The Basics
Battery saver mode
Battery saver mode changes certain settings to conserve battery power 
until you can recharge your phone. If you turn Battery saver mode On, it\
 will 
automatically activate when the battery charge level drops to the level \
you 
set. If Battery saver mode is off, you’ll be prompted to turn on Batt\
ery 
saver mode when the battery reaches low levels.
1.  From the Home screen, tap the 
Menu Key  > Settings > Battery > Battery saver > Turn Battery saver on. 
2.  Select the...

17The Basics
Turning the screen on using the KnockON feature
The KnockON feature allows you to double-tap the screen to easily turn t\
he 
screen on or off.
  Quickly double-tap the center of the screen to turn the screen on.
  Quickly double-tap the Status Bar, an empty area on the Home screen, 
or the Lock screen to turn the screen off.
  NOTE   The KnockON feature can be turned off in the Gestures menu. From the Hom\
e screen,  
tap Menu Key  > Settings  > Gestures > remove the checkmark from the...

18The Basics
Unlocking your screen using the Knock Code feature
The Knock Code feature allows you to create your own unlock code using a\
 
combination of knocks (or taps) on the screen.
1.  While the screen is off, tap the same sequence you established  anywhere on the screen. The Home screen will be accessed directly.
  NOTE    KnockON is disabled when Knock Code is in use.
To turn the phone sounds off
If you’re in a place where your phone sounds may disturb others, you \
can 
quickly silence your...