Loewe Individual 32 Lcd Operating Instructions

21	-

Status display
➠	In	normal	TV	mode,	without	other	displays:
END: Show	/	hide	status	display.
In	the 	top 	two 	lines 	you 	will 	see 	the 	number 	and 	name 	of	the 	station, 	the 	title 	of 	the 	programme 	currently 	running	(if 	available) 	and 	the 	sound 	identification.
The	 time	 and,	 if	activated,	 the	alarm	time	and	switch-off	time	are	displayed	at	the	bottom.
Explanations of the symbols for sound identification:
Transmitted	audio	signal:
  Mono	 Mono	audio	transmission	analogue
 2-sound...

-	22

Managing stations
TV stations
Various	options 	for 	managing 	stations 	are 	available 	via 	the 	TV 	menu. 	For	example 	the 	description 	for 	TV 	stations. 	For 	radio 	stations 	the 	same 	applies,	except 	that 	the 	radio 	menu 	is 	called 	in 	radio 	mode 	(see 	also 	page 	34).
➠		Station 	management 	is 	not 	possible 	if 	a 	programmed 	timer 	recording	is 	still 	pending.
Search/update stations  – Search wizardIn	 the	 search/update	 with	the	search	 wizard,	 new	stations	 are	searched...

23	-

Search/update station – manual search
Call	TV menu.
	34	Select	Settings,		6	go	to	the	menu	line	below.
	34	Select	Stations,		6	go	to	the	menu	line	below.
	34	Select Manual adjustment,		OK	call	input	box.
You	can	enter	 or	edit	 the	station	 data	in	the	 following	lines:
Or:
Blue button:	Starts 	Search and	searches 	for 	next 	station.
Red button: Stores	station.
➠  Only 	stations 	for 	the 	selected 	signal 	source 	can 	be	
saved	which	do	not	yet	exist	in	the	station	list.
➠  Stations 	which...

-	24

Rename station
➠  DVB	stations 	for 	which 	the 	station 	name 	is 	also 	broadcast	cannot 	be 	renamed. 	In 	this 	case, 	the 	Rename	function	is 	hidden.
Blue button:	Activates	Rename station.
Under	 the	1st	letter	 of	the	 name	 you	will	see	a	line	 indi-cating	the	current	input	position.
	4	Input	position	right	(also	for	spaces).	3	Input	position	left	deletes	the	preceding	character.
Enter 	the 	letters 	one 	after 	another 	with 	the 	numeric	buttons 	on 	the 	remote 	control. 	Like 	using 	a...

25	-

Managing stations
Add station to favourites list 
	3	Go	to	the	left	column	(all	stations).
P+/P–	Scroll 	in 	the 	pages 	of 	the 	station 	list 	if 	necessary.
	6	 	Mark	station	or	select	station	with	the	numeric 
buttons (for	alphabetical	station	sorting	enter	the	
initial	letter)	which	is	to	be	transferred	as	a	
favourite	to	the	favourites	list.	
	OK		
transfers	the	station	to	the	favourites	list.	The	new	station	is	inserted	at	the	end	of	the	favourites	list.
Proceed	in	the	same	manner	with...

-	26

Picture in Picture (PIP)
The	concurrent	 display	of	two	 different	 images	is	referred	 to	as	Picture	in	Picture.
➠	A	concurrent 	representation 	of 	two 	HDTV 	signals 	is 	not 	possible.
➠	A 	concurrent 	representation 	of 	two 	coded 	stations 	is 	not 	possible.
➠	Picture 	change 	and 	station 	selection 	is 	restricted 	during 	recording.
Your TV set differentiates two PIP types:
	Split	Screen	In	 this	 case	 the	screen	 is	divided	 in	the	 middle	 and	the	additonal	 PIP	image	 is	shown	 on...

27	-

Change position of the PIP
➠		Other 	than 	the 	status 	line, 	which 	may 	possibly 	be	displayed, 	no 	other 	display 	is 	shown 	on 	the 	screen:
634Move	the	PIP	into	a	corner	of	the	screen.
Moving	the	small	picture	is	possible	if	there	is	a	green,	white	and	blue	frame.
The	 position	 of	the	 small	 picture	 can	also	 be	selected	under	Position	in	the	PIP	menu.
Switch to Split Screen
➠ PIP	menu	open.
	34	Select	Type,		6	go	to	the	menu	line	below.
	34	Select	Split Screen.
Configure Picture in...

-	28

Adjusting the programme list
➠  Selection	is	at	the	top	in	the	defaults,	if	not,	press	the	blue button.
	6	Select	Date,	Time,	Station	or	Topics.
	34	Select	defaults 	within 	the 	respective 	line.
	 Example	 If	 you	are	looking	 for	the	 next	 news	 broadcast,	 select	today's	date,	for	time,	 select	soon,	for	 station	 select	all,	and	for 	topics, 	select 	News.	Then 	you 	get 	a 	list 	of 	all 	news	programmes	in	the	programme	list	below.
	 Time	entry	 If	 the	line	Time	is	 selected,	 then...

29	-

You	can	remove	 certain	stations	 from	the	programme	guide.	 These	stations	 must	be	deactivated	 in	the	Station selection.	First,	 all	stations	 for	which	 programme	 infor-mation	can	be	provided	 are	marked	 with	a	.	Stations	without	 a		are	not	 included	 in	the	 programme	 guide.
Marking	the	stations	according	to	reception	ranges:
	 analogue	stations	via	antenna/cable,	for	which	the			 current	provider	supplies	data.	
		 digital	terrestrial	stations	DVB-T,
		 digital	cable	stations...

-	30

Additional page selection possibilities
1st possibility:
Call	overview page 100.
2nd possibility:
Directly	enter	the	page	number.
3rd possibility:
➠ The	page	includes	3-digit	page	numbers.
	6	mark	desired	page	number.
OK	to	call	the	page.
4th possibility:
➠  The	page	 consists	 of	several	 pages.	This	is	shown	 by	the	selection	possibility	in	the	last	line.
	34	Page	through	sub-pages.
Call TOP table
➠		The	 table	 can	only	 be	called	 for	stations	 with	the	TOP	operating	system.
	OK	 Call	TOP...