Home > Lucent Technologies > Communications System > Lucent Technologies Ds1/Cept1/Isdn Pri Reference Manual

Lucent Technologies Ds1/Cept1/Isdn Pri Reference Manual

Here you can view all the pages of manual Lucent Technologies Ds1/Cept1/Isdn Pri Reference Manual. The Lucent Technologies manuals for Communications System are available online for free. You can easily download all the documents as PDF.

Page 51

DEFINITY Communications System Generic 2.2 and Generic 3 V2 
DS1/CEPT1/ISDN PRI Reference  
555-025-107  Issue 1
July 1993
Physical Layer 
Page 4-7 Framing Format 
4
Tab le 4-1 illustrates these p oints:
Notes:
1. C1 throug h C4 =  CRC-4 b its
2. U =  Unassig ned  b it
3. Yf =  Remote frame alarm b it
4. E =  Remote end  b loc k error b its
G2.2 Framing Format Implementation
In G2.2 you selec t either ESF or D4 framing  in p roc ed ure 260, word  1, field  6.
Table 4-1. 2.048 Mbps CEPT1 in Channel 0...

Page 52

DEFINITY Communications System Generic 2.2 and Generic 3 V2 
DS1/CEPT1/ISDN PRI Reference  
555-025-107  Issue 1
July 1993
Physical Layer 
Page 4-8 Companding 
4
G3V2 Framing Format Implementation
If you administer the DS1 bit rate, the G3V2. supp orts D4 and  ESF as op tions in 
the S1 c irc uit p ac k form. You should  use ESF if p ossib le. The p rimary reason for 
this is for reframing  after a misframe. ESF automatic ally reframes whereas D4 
d oes not. This ab ility to reframe is esp ec ially c ruc...

Page 53

DEFINITY Communications System Generic 2.2 and Generic 3 V2 
DS1/CEPT1/ISDN PRI Reference  
555-025-107  Issue 1
July 1993
Physical Layer 
Page 4-9 Companding 
4
1. Excep t Cairo, whic h uses mu-law c omp and ing  at the CEPT1 bit 
rate.
Table 4-2. Countries Supporting A-Law Companding at the CEPT1 Bit Rate
European
Belg ium Czechoslovakia Franc e
Germany Greec e Hung ary
Italy Netherland s Russia
Sp ain Switzerland U.K.
Pacific Rim
Australia China Ind ia
Ind onesia New Zealand Philip p ines
Sing ap ore...

Page 54

DEFINITY Communications System Generic 2.2 and Generic 3 V2 
DS1/CEPT1/ISDN PRI Reference  
555-025-107  Issue 1
July 1993
Physical Layer 
Page 4-10 Channel Structure and Signaling 
4
Any DEFINITY system using  any DS1 interfac e board  other than the TN464C or 
later is mu-law b y d efault and  c annot b e c hang ed  in ad ministration.If a TN464C 
or later is used  on a G3V2, however, c omp and ing  is ad ministrab le. The following  
field  ap p ears on the DS1 c irc uit p ac k form:
NOTE:
A system c...

Page 55

DEFINITY Communications System Generic 2.2 and Generic 3 V2 
DS1/CEPT1/ISDN PRI Reference  
555-025-107  Issue 1
July 1993
Physical Layer 
Page 4-11 Channel Structure and Signaling 
4
Following  are the CEPT1 signaling  typ es:
nBit oriented  c ommon c hannel sig naling , whic h inc lud es only one type 
c alled  c hannel assoc iated  sig naling  (CAS)
nISDN PRI sig naling
Robbed-Bit Signaling
Rob b ed -b it sig naling (RBS) may b e used  over DS1 1.544 mb p s fac ilities. With 
RBS, in every 6th frame...

Page 56

DEFINITY Communications System Generic 2.2 and Generic 3 V2 
DS1/CEPT1/ISDN PRI Reference  
555-025-107  Issue 1
July 1993
Physical Layer 
Page 4-12 Channel Structure and Signaling 
4
For AT&T p roprietary signaling , a c omp lete set of sig naling  information is sent 
every 24 frames. This 24-frame period  is not sync hronized  to the 12-frame 
sup erframe (D4) format or to the 24-frame extend ed  sup erframe (ESF) format. 
Eac h sig naling  b yte c ontains the eq uivalent of a c hannel id entific...

Page 57

DEFINITY Communications System Generic 2.2 and Generic 3 V2 
DS1/CEPT1/ISDN PRI Reference  
555-025-107  Issue 1
July 1993
Physical Layer 
Page 4-13 Channel Structure and Signaling 
4
Notes:
1. .X =  Reserved  for future use. Set to 0.
2. RMA =  Remote multiframe alarm (0 =  alarm; 1 =  normal)
3. Bit 7 =  Primary b it p attern for sig naling  integ rity check
4. Bits 3, 4, 5, and  8 in frame 24 =  Sec ond ary b it p attern for sig naling  integ rity check
5. A and B = Signaling bits for indicated...

Page 58

DEFINITY Communications System Generic 2.2 and Generic 3 V2 
DS1/CEPT1/ISDN PRI Reference  
555-025-107  Issue 1
July 1993
Physical Layer 
Page 4-14 Channel Structure and Signaling 
4
Like CEPT1 framing , CAS sig naling is c yc led  throug h sixteen (0-15) frames (eac h 
c ontaining  c hannels 0-31), as shown in Ta b l e  4 - 6
:
Notes:
1. X =  unused  b it to b e set to 1.
2. Y =  b it used  to ind icate multiframe alig nment.
3. 0000 =  In b its 1 through 4 of frame 0. Multiframe alig nment sig nal.
4....

Page 59

DEFINITY Communications System Generic 2.2 and Generic 3 V2 
DS1/CEPT1/ISDN PRI Reference  
555-025-107  Issue 1
July 1993
Physical Layer 
Page 4-15 Channel Structure and Signaling 
4
Note that exc ep t for frame 0, the 16th c hannel of eac h frame hold s the sig naling  
for two voic e/d ata c hannels. The sig naling  is held  in p ositions A throug h D. For 
examp le, the 16th c hannel of frame 2 hold s the sig naling  bits (bits A throug h D) 
for voic e/d ata c hannels 2 and  18. The 16th c hannel of...

Page 60

DEFINITY Communications System Generic 2.2 and Generic 3 V2 
DS1/CEPT1/ISDN PRI Reference  
555-025-107  Issue 1
July 1993
Physical Layer 
Page 4-16 Channel Structure and Signaling 
4
G3V2 Signaling Implementation
The following  field  ap p ears in the DS1 c irc uit p ac k form:
If you administer c ommon c hannel sig naling , you must also c omp lete the 
following  field on the DS1 c irc uit p ac k form:Signaling Mode:
Enter either robbed-bit
, common-chan
, or isdn-pri
, CAS
, 
or isdn-ext
. Ad...
Start reading Lucent Technologies Ds1/Cept1/Isdn Pri Reference Manual

Related Manuals for Lucent Technologies Ds1/Cept1/Isdn Pri Reference Manual

All Lucent Technologies manuals