Macrotel Mt360 Series Digital Key System Installation Manual

MT-360 SERIESTAL KEY~SYSTEM 

MACROTEL INTERNATIONAL CORPORATION
MacmTel Intemhtional Corporation reserves the right, without prior notice, to revise this information publication for any reason, including, but not limited
to, utilization of new advances in t.hc state of technical arts or to simply change the design of this document.
Further, MacroTel International Corporation also reserves the right, without prior notice, to make such changes in equipment design or components as
engineering or manufacturing methods may warrant...

FEATURE LISTING. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .l-3GENERA. DESCRIPTIONINTRODUCTION. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .l-2KEYSERVICE UNIT . . . . .1-7.MT-COT/G .. . . . . . . .. . . . . . . . .. ,..........i-iMT-STNI16 . . . . . . . . . . . . . . . . . ...: :. ’ ‘u:‘:.:.,,.,...,.,,,, ,,,,’ .:‘:. 1-2MT-CCB . . . . . .MT-EXP . . . . . . . . . . . :.:......

TOOLS . . . . . . . . . . . .IMPORTANT SAFETY INSTRUCTIONS’ :’ ,.2.12-2
MOUNTING THE CABINET. ,,.,, ,. ,.,, 2-3CONNECTlON OF CABLES~ . .SVSTEMSPEClFlCATlONS .:,2-3
2-3
INSTALLATION OF THE POWER.._,. . . .. .2-4INSTALLATION OF CENTRAL OFFICE TRUNKS2-4INSTALLATION POWER FAILURE TRANSFER PHONE2-5INSTALLATION OF STATIONSINSTALLATION OF SMDR AND MODEM . .2-52-6INSTALLATION OF ACCESSORIES.INSTALLING THE LOUD BELL::“7BATTERY INSTALLATION
DBQ TO DB25 CABLE,, ,, ;:J8AMPHENOLAND 
STATiON NUMBERS. ‘, ,,,, : 2-8ATA...

ACCOUNT CODE (UNVERIFIED)
ACCOUNT CODE (FORCED)
ALPHANUMERIC DISPLAY
ANALOG ADAPTOR
All-ENDANTAUTOMATIC HOLD
AUTOMATlC LINE SELECTION
AUTOMATED AlTENDANT INTERGRATlONBACKGROUND MUSICBARGE-IN
BAlTERY BACKUPBAlTERYREVERSALDETECT
BOSS/SECRETARY
BUSY LAMP FIELD
CALL AGAIN
CALL FORWARD
CALLING PARTY IDCALL OPERATOR
CALL PARK
CALL PARK ANSWER
CALL PICKUP (GROUP/DIRECT)
CALL WAITINGCAMP-ON (BUSY STATION)
CAMP-ON (BUSY LINE)
CLASS OF SERVICE
CONFERENCECPID
DATA CALL
DATA RATE SELECTIONDEFAULT SElTlNGDIAL ACCESS...

The MT-360 Series is a high performance digital key telephone system capable of supporting both voice and data applications.It
is available in a six-line by 16-station configuration, with an optional expansion board available, for a configuration of eight lines
by 24 key telephones with growth capabilities of up to 360 ports.
The MT-360 Series is based on truly digital 
2B+D technology, with single-pair wire connection between the KSU and the station
terminals. Analog terminal adaptors are available, for...

MT-360 Executive SetP/N 30091 l’011 feature keys, five fixed function keys, speakerphone, one
shift key, 12 DSS/SPD keys, and three soft keys, 2 X 16 dot
matrix LCD display. Off-Hook Voice Announce, and nine-pin
dataport. Uses Bl channel as voice channel, 82 as either
OHVA or data channel. This allows for simultaneous voice and
data transmission. The D channel is used for control signals to
and from the KSU.
Faerplato of MT-360 Sorioo Shndard So+KA-
Facoplah of MT-360 SorbsDisplay and 
~xoculvo Sot
KOLD...

ATTENDANT
[Resource]One station per system is programmed as the attendant. The
attendant provides attendant support services, such as line
recall, forced incoming ICMcallforward, etc. The attendant canbe reached by dialing “0.”
Conditions:
- Default: station #lo, port one, is designatedas the attendant.
- Any station can be programmed as attendant.- Only one station can be attendant, however, other stations
maybeprogrammed to answerincoming linecalls, accordingto requirements.
AUlOMATlC HOLDA call is...

CALL FORWARD
Various caPforwarding features allow station users to have all
calls forwarded to the attendant, another extension, or a voice
mail port. This ensures that all calls will be promptly directed to
the proper party so callers are not left waiting. There are five
types of Call Forward:
a) 
Busy Call Forward: Calls are forwarded on busy only.
b) No Answer Call Forward: Calls are forwarded on no answer
only.
c) Always Call Forward: Calls are forwarded always, regard-
less of station’s status....

CONFERENCE
Conferences Between internal and external parties may be set
up by a station user.
Conditions:Up to four parties may participate in one conference.
Any wmbination of C. 0. lines and 
ICM lines may be used.
Each conference is controlled by one station, Called the
controfkng party.The COntrOlling party iS permitted either toinvite new parties into the conference or to forcibly release
any party 
from the conference in progress.
The controlling party may hold a private conversation with
any of...