Metz Clarus 32 Ml Operating Instructions

61
Opening the menu
22.1 Setting Stations
Analogue TV
Terrestrial station search
The terrestrial station search automatically searches
the entire range of available reception frequencies
for stations. All stations which are found are placed
in the station table which is displayed at the end of
the search operation. If you are not satisfied with the
order in which the stations are displayed, you can
move them to other positions or delete unwanted
stations (see Section 24., Sorting stations.
Executing a...

62
The TV set will normally detect the colour standard
(PAL, SECAM, NTSC, NTSC44, PAL60, PAL M)
automatically.
If this automatic selection does not provide satis-
factory results (which should happen only rarely),
you can select the colour standard manually for
each programme position.
The colour standard is set in the factory to Auto-
matic.
Setting the colour standard
• Press the MENU key to open the TV menu.
• Press the white key  to open the station table.
• Press the F2key to enable
editing of the...

63
The DVB-T station search operation searches the
entire frequency band for TV stations. All stations
which are found are placed in separate TV station
tables. 
If you are not satisfied with the order in which the
stations are displayed, you can move them to
other positions or delete unwanted stations (see
Section 24., Sorting stations.
Executing the automatic station search
• Press the MENU key to open the TV menu.
• Press the red key  to open the menu Confi-
guration.
• 
Use the corresponding numeric...

64
For a manual station search, you must know the
channel number or the frequency of the station
you wish to find.
Executing the manual search
• Press the MENU key to open the TV menu.
• Press the red key  to open the menu Confi-
guration.
• Use the corresponding numeric key (in the
example: 
#) to select  DVB-T.
• The cursor is now on the menu line Antenna.
Press the OK key
• In the setting window Antenna, you can switch
the supply voltage for an
antenna on or off with the - +
key.
• Press the OK key...

65
The DVB-C station search operation searches the
entire frequency band for TV and radio stations.
All stations which are found are placed in separa-
te TV and radio station tables. See Section 29 for
details of DVB radio mode. 
If you are not satisfied with the order in which the
stations are displayed, you can move them to
other positions or delete unwanted stations (see
Section 24., Sorting stations.
Executing the automatic
search
• Press the MENU key to
open the TV menu.
• Press the red key  to...

66
For a manual station search, you must know the
channel number or the frequency of the station you
wish to find.
Executing the manual search
• Press the MENU key to open the TV menu.
• Press the red key  to open the menu 
Configuration.
• Use the corresponding numeric key(in the
example: 
) to select 
DVB-C.
• The cursor is on the menu
line Automatic search.
• Use the corresponding
numeric key(in the exam-
ple: 
) to select Manual
search.
• The cursor points to Chan-
nel.
• In the setting window,...

67
23. Station Logo
With the aid of the VPS signal, a station logo with
a maximum length of 15 characters is automati-
cally assigned to each station.
If this automatic assignment does not work, or if
you want to use a different logo, you can change
the setting manually.
Setting the station logo
• Press the MENU key.
• Press the white key  to open the “station
table”.
• Press the F2key to enable editing of the station
table.
• Select the programme position whose logo you
wish to change.
• Press the...

68
24. Sorting Stations
You can move, copy and delete individual stations
or groups of stations within the station table.
Moving, copying and deleting stations
• Press the MENU key to open the TV menu.
• Press the white key  to open the station table.
• Use the cursor control keyto select the pro-
gramme position which is to be moved, copied
or deleted. You can also mark a contiguous
block of positions by moving the cursor to the
programme position at the end of the block.
• Briefly press the OKkey to...

69
25. Registering AV DevicesOpening the menu
MENUAV(audio/video) devicesare external devices
which deliver video and/or audio signals (such
as video recorders, DVD players, DVD recorders,
etc.) and which can be connected to TV sets.
All commonly available AV devices are listed in
the menu AV devices.
Note that you must always connect AV
devices exactly as shown in the connection
diagram in the TV menu of your TV set !
SVHS/Hi8 and Data Logic video recorders mustalways
be connected to the EURO1 socket of...

70
Data Logic video recorder
Data Logic is a system which provides a dialo-
gue between a TV set and a video recorder. This
intelligent system offers the features such as:
- Automatic transfer of the settings for terrestrial or
cable TV stations (not DVB) to the video recorder.
- Immediate recording - the video recorder
records the programme currently displayed on
the TV screen.
- Automatic switching to the AV programme posi-
tion.
- Direct control of the video recorder from the
timer menu of the TV...