Metz Clarus 32 Ml Operating Instructions
Have a look at the manual Metz Clarus 32 Ml Operating Instructions online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 5 Metz manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
21 Opening the menu MENU 11. General Picture Settings Some of the menu items are not available in a 2 ** menu. The picture settings zoom, vertical position, auto- matic zoom and panorama can be set and saved as general settings for all programme positions. Setting the zoom/panorama mode: • Press the MENU key. The TV menu appears on the screen. • Press the blue key . The menu Picture and sound and the menu item General picture settings are pre-selected. • Use the cursor control key to select the menu item Brightness. • Press the corresponding numeric keyto select Zoom/Panorama. • Use the cursor control key to select the desired menu items. • Use the -+ key to change the settings for Zoom/Panorama. • Press the OK key to save the new settings. The picture shows the factory settings. • Press the EXIT key to close the TV menu. The functions Panorama and Zoom can be combined with each other. OK EXIT The number of subjects and sections depends on the selected scope of operation. Depending on the configuration of the TV set, the various menu items may be displayed in a different order and numbered differently. 3) See glossary for an explanation. Zoom value 0 Panorama Yes Picture pos., vert. 0% Pan. modeNon-linear Automatic zoom off Picture improvment Factory settings Zoom/Panorama3)7) Noise reduction3) Picture sharpness Colour impr. Colour intensity Contrast Brightness Sound set,.prog.posn Sound settings, gen. Pict.set.,prog.posn. Picture settings, gen. Picture-Volume Change with Accept value with .– +OK 607 47 2042.A1 Clarus GB 04.12.2007 9:59 Uhr Seite 21
22 11.1 Picture Settings for Programmes via TV Menu Opening the menu Picture settings for individual programme positions are not available in a 2 ** menu. If the standard values do not provide a satisfacto- ry picture in some programme positions, you can make different settings for these positions which override almost all of the general picture settings. These individual settings apply only to the pro- gramme position for which they are made, and they cannot be overwritten with the standard values. In addition to the general picture settings, the individual settings also include the settings colour offset, colour standard and VCR. Individual picture settings for programme position xy: • Select the programme posi- tion whose picture settings you wish to change. • Press the MENU key. The TV menu appears on the screen. • Press the blue key . The menu Picture and sound and the menu item General picture set- tings are pre-selected. • Use the cursor control key to select the menu item Pic. settings for Pr. And press the OK key. • Use the corresponding numeric keys (in this example: for noise reduction) to select the desired menu items. • In the setting window, use the -+ key to change the setting. • Press the OK key to save the new setting. • Press the EXIT key to close the TV menu. 2) Possible only on sets equipped with this function. 3) See glossary for an explanation. 5) Available only for DVB stations! 7) Available only for analogue stations! Noise reduction lightVCR 3) Picture format5) Colour standard3)7) Colour offset3)7) Noise reduction3) Picture sharpness Colour intensity Contrast Sound set,.prog.posn Sound settings, gen. Pict.set.,prog.posn. Picture settings, gen. Picture-Volume Change with Accept value with– +OK MENU OK EXIT OK 607 47 2042.A1 Clarus GB 04.12.2007 9:59 Uhr Seite 22
23 Opening the menu 11.2 Picture Settings for Programme via Station Table Individual picture settings for programme position xy: • Select the programme position whose picture settings you wish to change. • Press the MENU key. The TV menu appears on the screen. • Press the white key . The station table is dis- played with the currently active programme position highlighted. • Press the F2key to enable editing of the station table. • Press the cursor control key to move to the subject side. • Use the corresponding numeric keys (in this exam- ple: for the picture quali- ty) to select the desired menu items. • In the setting window, use the cursor control key to select the desired function. • Use the -+ key to change the setting. gen. means here that the new setting will overwrite the related general picture setting (see pages 18). The individual settings made here which differ from the general settings remain saved. • Press the OK key to save the new settings. • Press the EXIT key to close the TV menu. OK EXIT Picture sharpness gen. Noise reduction gen. Colour offset 0 VCR offSound corrections Colour standard 3)7) Picture quality Picture correct. Enter logo Station contained in EPG Signal quality5) DVB-prog. info5) Frequency/channel7) 0010 Hessen 3 0009 Südwest 0008 MDR 0007 PRO 7 0006 RTL 2 0005 RTL 0004 SAT 1 0003Bayern 3 0002 ZDF 0001 ARD Station table Change with Accept value with– +OK ✗ F1➔ MENU F2 The number of subjects and sections depends on the selected scope of operation. Depending on the configuration of the TV set, the various menu items may be displayed in a different order and numbered differently. 3) See glossary for an explanation. 5) Available only for DVB stations! 7) Available only for analogue stations! 607 47 2042.A1 Clarus GB 04.12.2007 9:59 Uhr Seite 23
24 Opening the menu12. General Sound Settings Some of the menu items are not available in a 2 ** menu. The sound settings volume, treble, bass, stereo wide and spatial sound can be set generally for all programme positions and saved as standard values which can be recalled at any time by pres- sing the OK key. Opening the sound settings menu: • Press the MENU key. The TV menu appears on the screen. • Press the blue key . The menu Picture and sound and the menu item General picture settings are pre-selected. • Use the corresponding numeric key (in the exam- ple: ) to select General sound settings. • Use the corresponding numeric keys to select the desired menu items in the right-hand column. • Press the OK key to open the selected menu item for editing. • In the setting window, use the -+ key to change the setting. • Use the cursor control key to select the third line Save as standard value. • If you wish to save the new setting, use the -+ key to select Yes. • Press the OK key to save the new settings as standard values. • Press the EXIT key to close the TV menu. If the standard values do not provide satis- factor y results for some programme posi- tions, you can make different individual set- tings for these positions. See sections 12.1. MENU OK EXIT ! The number of subjects and sections depends on the selected scope of operation. Depending on the configuration of the TV set, the various menu items may be displayed in a different order and numbered differently. 2) Possible only on sets equipped with this func- tion. 3) See glossary for an explanation. 4) Available only if SRS WOW is switched off Volume61Standard value50 Use as default value:Ye sBase width 4) Spatial sound 4) Balance Tone setting Volume headphones Bass Treble Automatic volume control3) SRS WOW 2) 3) Volume Sound set,.prog.posn Sound settings, gen. Pict.set.,prog.posn. Picture settings, gen. Picture-Volume Change with Accept current value as default value.– + F1➔ 607 47 2042.A1 Clarus GB 04.12.2007 9:59 Uhr Seite 24
25 12. General Sound Settings Some of the menu items are not available in a 2 ** menu. Setting SRS-WOW 2) • Press the MENU key. The TV menu appears on the screen. • Press the blue key . The menu Picture and sound and the menu item General picture set- tings are pre-selected. • Press the numeric key to select General sound set- tings. • Use the corresponding numeric key (in the example: ) to select SRS–WOW 2). • In the setting window, use the -+ key to change the setting. • Press the OK key to save the changed setting. • „Press the EXIT key to close the TV menu. If the SRS-WOW function is active, the menu items stereo wide and spatial sound are disabled. Opening the menu MENU OK EXIT ! The number of subjects and sections depends on the selected scope of operation. Depending on the configuration of the TV set, the various menu items may be displayed in a different order and numbered differently. 2) Possible only on sets equipped with this function. 3) See glossary for an explanation. 4) Available only if SRS WOW is switched off SRS WOW2)3) on Base width 4) Spatial sound 4) Balance Tone setting Volume headphones Bass Treble Automatic volume control3) SRS WOW 2) 3) Volume Sound set,.prog.posn Sound settings, gen. Pict.set.,prog.posn. Picture settings, gen. Picture-Volume Change with Accept value with – + F1➔ OK 607 47 2042.A1 Clarus GB 04.12.2007 9:59 Uhr Seite 25
26 Automatic volume correction Some TV stations transmit their commercials at a higher sound volume than that for the normal pro- gramme. In order to save you from adjusting the volume each time with the remote control, you can activate automatic volume correction. With this function active, there is little difference in the volume levels for the normal programme and the commercials. The setting made here applies to all programme positions. Opening the volume correc - tion menu: • Press the MENU key. The TV menu appears on the screen. • Press the blue key . The menu Picture and sound and the menu item General picture settings are pre-selected. • Use the corresponding numeric key (in the example: ) to select General sound settings. • Use the corresponding numeric key (in the example: ) to select Volume correction. • In the setting window, use the -+ key to change the setting. • Press the OK key to save the new setting. • Press the EXIT key to close the TV menu. The function Volume correction in the menu General sound settings does not overwrite the function Volume correction in the menu Sound settings for Pr.... Opening the menu12. General Sound Settings MENU OK EXIT !! The number of subjects and sections depends on the selected scope of operation. Depending on the configuration of the TV set, the various menu items may be displayed in a different order and numbered differently. 2) Possible only on sets equipped with this function. 3) See glossary for an explanation. 4) Available only if SRS WOW is switched off Volume control3) on Base width 4) Spatial sound 4) Balance Tone setting Volume headphones Bass Treble Automatic volume control3) SRS WOW 2) 3) Volume Sound set,.prog.posn Sound settings, gen. Pict.set.,prog.posn. Picture settings, gen. Picture-Volume Change with Accept value with – + F1➔ OK 607 47 2042.A1 Clarus GB 04.12.2007 9:59 Uhr Seite 26
27 12. General Sound Settings Base width and spatial sound The menu points base width and spatial sound are only shown when the function SRR WOW is turned off.. Base width In the case of stereo transmissions, the base width (= spatial distance between the loudspeakers) can be artificially widened to achieve a larger stereo triangle. Spatial sound In the case of mono transmis- sions, an artificial stereo effect can be produced. Activate base width/spatial sound: • Press the MENU key. The TV menu appears on the screen. • Press the blue key . The menu Picture and sound and the menu item General picture settings are pre-selected. • Press the numeric key to select General sound settings. • Select Spatial sound or Base width with key allocated, in the example or 0. • In the setting window, use the -+ key to change the setting. • Press the OK key to save the changed setting. • „Press the EXIT key to close the TV menu. Opening the menu OK EXIT The number of subjects and sections depends on the selected scope of operation. Depending on the configuration of the TV set, the various menu items may be displayed in a different order and numbered differently. 2) Possible only on sets equipped with this function. 3) See glossary for an explanation. 4) Available only if SRS WOW is switched off MENU ! Spatial sound onBase width 4) Spatial sound 4) Balance Tone setting Volume headphones Bass Treble Automatic volume control3) SRS WOW 2) 3) Volume Sound set,.prog.posn Sound settings, gen. Pict.set.,prog.posn. Picture settings, gen. Picture-Volume Change with Accept value with – + F1➔ OK 607 47 2042.A1 Clarus GB 04.12.2007 9:59 Uhr Seite 27
28 12.1 Sound Settings for Programmes via TV Menu Opening the menu Some of the menu items are not available in a 2 ** menu. Volume correction Various TV stations broadcast their programmes with different sound volumes. This volume diffe- rence can be minimised by correcting the volume. This adjustment remains active even if the stan- dard sound values are recalled. Adjusting the volume correc - tion: • Press the MENU key. The TV menu appears on the screen. • Press the blue key . The menu Picture and sound and the menu item General picture settings are pre-selected. • Use the corresponding numeric key (in the exam- ple: ) to select Sound settings for Pr.. • Press the OK key and then, in the setting widow, use the -+ key to change the setting. • Press the OK key to save the new settings. • Press the EXIT key to close the TV menu. Individual sound settings can also be made in the station table. MENU OK EXIT OK The number of subjects and sections depends on the selected scope of operation. Depending on the configuration of the TV set, the various menu items may be displayed in a different order and numbered differently. Volume correction -15Forced mono Tone settings Volume correction Sound set,.prog.posn Sound settings, gen. Pict.set.,prog.posn. Picture settings, gen. Picture-Volume Change with Accept value with – +OK 607 47 2042.A1 Clarus GB 04.12.2007 9:59 Uhr Seite 28
29 12.1 Sound Settings for Programmes via TV Menu Opening the menu Some of the menu items are not available in a 2 ** menu. Tone setting The tone setting can be set to Normal or Speech. The setting Speech should be used primarily for stations which broadcast mainly pro- grammes with a lot of speech, such as news sta- tions. The setting Normal is better for music pro- grammes. Adjusting the tone setting : • Press the MENU key. The TV menu appears on the screen. • Press the blue key . The menu Picture and sound and the menu item General picture settings are pre-selected. • Use the corresponding numeric key (in the exam- ple: ) to select Sound settings for Pr.. • Use the corresponding numeric key (in the example: ) to select Tone settings. • In the setting window, use the -+ key to change the setting. • Press the OK key to save the new settings. • Press the EXIT key to close the TV menu. Individual sound settings can also be made in the station table. MENU OK EXIT The number of subjects and sections depends on the selected scope of operation. Depending on the configuration of the TV set, the various menu items may be displayed in a different order and numbered differently. 7) Available only for analogue stations! Tone settings Speech Forced mono7) Tone settings Volume correction Sound set,.prog.posn Sound settings, gen. Pict.set.,prog.posn. Picture settings, gen. Picture-Volume Change with Accept value with – +OK 607 47 2042.A1 Clarus GB 04.12.2007 9:59 Uhr Seite 29
30 12.1 Sound Settings for Programmes via TV Menu Some of the menu items are not available in a 2 ** menu. Forced mono It may happen that your TV set switches from mono to stereo in the middle of a programme, alt- hough no stereo sound is being transmitted. This is generally caused by the local reception condi- tions. If you activate Forced mono for the selec- ted programme position, all programmes from this station will be reproduced in mono. Activating forced mono: • Press the MENU key. The TV menu appears on the screen. •Press the blue key . The menu Picture and sound and the menu item General picture set- tings are pre-selected. • Use the corresponding numeric key (in the example: ) to select Sound settings for Pr.. • Use the corresponding numeric key (in the example: ) to select Forced mono. • In the setting window, use the -+ key to change the setting. • Press the OK key to save the new settings. • Press the EXIT key to close the TV menu. Individual sound settings can also be made in the station table. Opening the menu MENU ! OK EXIT The number of subjects and sections depends on the selected scope of operation. Depending on the configuration of the TV set, the various menu items may be displayed in a different order and numbered differently. Forced mono onForced mono 7) Tone settings Volume correction Sound set,.prog.posn Sound settings, gen. Pict.set.,prog.posn. Picture settings, gen. Picture-Volume Change with Accept value with – +OK 607 47 2042.A1 Clarus GB 04.12.2007 9:59 Uhr Seite 30