Metz Clarus 32 Ml Operating Instructions
Have a look at the manual Metz Clarus 32 Ml Operating Instructions online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 5 Metz manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
31 12.2 Sound Settings for Prog. via the Station Table Opening the menu Some of the menu items are not available in a 2 ** menu. Making sound corrections: • Select the programme position whose sound set- tings you wish to change. • Press the MENU key. The TV menu appears on the screen. • Press the white key . The station table is dis- played with the currently active programme position highlighted. • Press the F2key to enable editing of the station table. • Use the cursor control key to move to the subjects side. • Use the corresponding numeric keys (in this exam- ple: ) for sound correc- tions) to select the desired menu items. • In the setting window, use the cursor control key to select the desired functions. The use of the -+ key to change the selected set- ting. gen. means here that the new setting will overwrite the general sound settings (see pages 24 and 26). The individual settings made here, which differ from the standard values, remain saved. Press the OK key to save the new settings. Press the EXIT key to close the TV menu. MENU F2 OK EXIT The number of subjects and sections depends on the selected scope of operation. Depending on the configuration of the TV set, the various menu items may be displayed in a different order and numbered differently. 3) See glossary for an explanation. 5) Available only for DVB stations! 7) Available only for analogue stations! Volume correction 0 Tone settings gen. Forced mono7)offSound corrections Colour standard 3)7) Picture quality Picture correct. Enter logo Station contained in EPG Signal quality5) DVB-prog. info5) Frequency/channel7) 0010Hessen 3 0009Südwest 0008MDR 0007PRO 7 0006RTL 2 0005RTL 0004SAT 1 0003Bayern 3 0002ZDF 0001 ARD Station table Change with Accept value with– +OK ✗ F1➔ 607 47 2042.A1 Clarus GB 04.12.2007 9:59 Uhr Seite 31
32 Opening the menu13. Automatic zoom The menu item Automatic zoom is not available in a 2 ** menu. When the automatic zoom function is active, pro- grammes in a widescreen format (such as pro- grammes in 16:9) are expanded to fill as much of the screen as possible. If the function is inactive, the programmes are dis- played in their original format. Activating the automatic zoom 2) • Press the MENU key. The TV menu appears on the screen. • Press the blue key . The menu Picture and sound and the menu item General picture settings are pre-selected. • Use the cursor control key to select the menu item Brightness. • Use the corresponding numeric key (in the exam- ple: ) to select the func- tion Zoom/Panorama. • Use the cursor control key to select the menu item Automatic zoom. • Use the -+ key to change the setting. • Press the OK key to save the new setting. • Press the EXIT key to close the TV menu. MENU OK EXIT The number of subjects and sections depends on the selected scope of operation. Depending on the configuration of the TV set, the various menu items may be displayed in a different order and numbered differently. Zoom value 0 Panorama Yes Picture pos., vert. 0% Pan. modeNon-linear Automatic zoom on Picture improvment Factory settings Zoom/Panorama3)7) Noise reduction3) Picture sharpness Colour impr. Colour intensity Contrast Brightness Sound set,.prog.posn Sound settings, gen. Pict.set.,prog.posn. Picture settings, gen. Picture-Volume Change with Accept value with .– +OK 607 47 2042.A1 Clarus GB 04.12.2007 9:59 Uhr Seite 32
33 Opening the menu14. Childlock With the aid of the childlock function, you can determine whether or not the TV set can be swit- ched on and which stations may be selected at which times. The childlock can be set such that: a) it is always active, b) one to six TV, radio or AV programmes (Prog A ... Prog F) are exempted from the locking func- tion (permitted programmes), or c) all programmes, or programmes which are not locked, may be viewed during a permitted time period (TV start – TV end). The childlock must be saved once with a 4-digit code (password). a) Activating the childlock • Press the MENU key. The TV menu appears on the screen. • Press the green key to open the menu Timer. • Use the cursor control key to select Settings and press the OK key. • In the setting window, use the cursor control key to select the menu item Acti- vate and then use the -+ key to set the childlock to Active. • Use the cursor control key to select Code and enter your personal 4-digit code with the numeric keys. Make a note of this code! • Press the OK key to save the new setting. • Press the EXIT key to close the TV menu. The number of subjects and sections depends on the selected scope of operation. Depending on the configuration of the TV set, the various menu items may be displayed in a different order and numbered differently. MENU OK OK EXIT Start viewing time --:-- End viewing time --:-- Code **** Activation on Permitted AV prog. Permitted radio prog. Permitted TV prog. Settings Recording control Timer setting Timer control Reminder Childlock Timer Change with Accept value with .– +OK 607 47 2042.A1 Clarus GB 04.12.2007 9:59 Uhr Seite 33
34 b) Permitted programmes: Activate the childlock as described in step a). Use the corresponding numeric key to select the menu item Permitted xx progs. (xx = TV, radio or AV). Press the OK key and, in the setting win- dow, enter the programme positions with the numeric keys or use the -+ key to select the des- ired programme positions. • Press the OK key to save the new settings. c) TV start – TV end Activate the childlock as des- cribed in step a). In the setting window, use the cursor control key to select the start and end times and enter the desired times with the numeric keys. Press the OK key to save the settings. Protecting the childlock settings with your code • Use the cursor control key to select Code and enter your personal code (password) with the numeric keys. Make a note of this code, since the child lock can be deactivated only if the correct code is entered ! • Press the OK key to save the settings. • Press the EXIT key to close the TV menu. • Switch off the TV set with the key. The childlock is not fully activated until the TV set is switched off. Deactivating the childlock If the childlock is active, a window requesting your personal code is displayed each time the TV set is switched on. Entering the correct code enables the TV set and it can then be used normally until it is switched off again. To cancel the childlock func- tion, proceed as described in step a), above, and set the childlock to Inactive. Opening the menu14. Childlock Factory settingCode: 0000 ✂ Prog A Kabel 1 Prog B ----- Prog C ----- Prog D ----- Prog E ----- Prog F ----- Permitted AV prog. Permitted radio prog. Permitted TV prog. Settings Recording control Timer setting Timer control Reminder Childlock Timer Enter programme position and save with . : clear. OKII 607 47 2042.A1 Clarus GB 04.12.2007 9:59 Uhr Seite 34
35 The menu item Reminder is not available in a 2 ** menu. If you wish to be reminded of something while watching TV, you can set a reminder for any des- ired time. At this time, a window with the remin- der appears on the screen. Setting the reminder time • Press the MENU key to open the TV menu. • Press the green key to open the Timer menu. • Press the numeric key to select Reminder. • Press the OK key and then, in the setting window, enter the desired time (four digits) with the numeric keys. • Press the OK key to save this setting. • Press the EXIT key to close the TV menu. At the programmed time, a window with the reminder is displayed on the screen. You can close this window by pressing any key on the remote control. If you do not want the reminder to appear ever y day, you must clear the time in the menu by pressing the ll key. Opening the menu15. Reminder MENU OK EXIT OK The number of subjects and sections depends on the selected scope of operation. Depending on the configuration of the TV set, the various menu items may be displayed in a different order and numbered differently. Time --:-- Reminder Recording control Timer setting Timer control Reminder Childlock Timer Clear the time withSave with Abort withOKII MENU 607 47 2042.A1 Clarus GB 04.12.2007 9:59 Uhr Seite 35
36 The menu items On time and Off time are not available in a 2 ** menu. In the menu item Timer control, you can pro- gramme a switch-on time, a switch-off time and a sleep timer (switch off after ...). The switch-on timeis the time at which the TV set is to be switched on automatically. The switch-off timeis the time at which the TV set is to be switched off automatically. The sleep timer(switch off after...) switches off the TV set after a programmed delay (which can be set in steps of 15 minutes). Setting the on time and of f time • Press the MENU key to open the TV menu. • Press the green key to open the Timer menu. • Press the numeric key !to select Timer control. • Press the OK key and then, in the setting window, enter the desired time (four digits) with the numeric keys. • Press the OK key to save the setting. • Press the EXIT key to close the TV menu. At the programmed on time, the TV set is switched on from the standby state (red LED lights). You must confirm this automatic action by pressing any key on the remote control. If this is not done, the TV set will switch back to the standby state after 10 minutes. This ensures that the TV set does not stay on if you are not at home. If you do not want to have the TV set switch itself on each day, you must clear the on and off times in the menu by pressing the ll key. 16. Timer ControlOpening the menu MENU OK EXIT OK ! The number of subjects and sections depends on the selected scope of operation. Depending on the configuration of the TV set, the various menu items may be displayed in a different order and numbered differently. Time --:--Switch off after... Switch-off time Switch-on time Recording control Timer setting Timer control Reminder Childlock Timer Clear the time withSave with Abort withOKII MENU 607 47 2042.A1 Clarus GB 04.12.2007 9:59 Uhr Seite 36
37 Normally, the TV set will determine the current date and time from the Teletext signals of the currently selected station (providing this station sends Teletext). Note: For this the device must be turned on with the mains switch. If this is not the case, or if an incorrect date or time is displayed, you can set the date and time manually. In almost all cases, you will not need to do this. Even the changeover between winter time and summer time is executed automatically. Setting the time and date manually: • Press the MENU key to open the TV menu. • Press the green key to open the Timer menu. • Press the numeric key to select Time settings. • Press the OK key and then, in the setting window, enter the current time with the numeric keys. • You can then start the internal clock precisely by pressing the OK key when the time you have entered is reached. • Press the numeric key to select Current date. • In the setting window, enter the date with the numeric keys. • Press the OK key to save the settings. • Press the EXIT key to close the TV menu. The local time offset is the difference between the local time where the TV set is installed and Greenwich Mean Time (GMT). The TV set nor- mally detects this time offset and also the addi- tional changeover to summer time. The time needs to be set manually only if it is not detected automatically. i 16.1 Setting the Time and DateOpening the menu MENU OK EXIT OK OK Time 20:00:00Local time offset Current date Current lokal time Recording control Timer setting Timer control Reminder Childlock Timer Save with Abort withOKMENU 607 47 2042.A1 Clarus GB 04.12.2007 9:59 Uhr Seite 37
38 16.2 Recording ControlOpening the menu This menu item is not available in a 2 ** menu. In the menu item Recording control, you can set a lead time and an overrun time for timer recordings. The TV set is automatically switched to the pro- gramme position from which the recording is to be made at a time which is the number of minutes programmed as the lead timebefore the pro- grammed starting time for the recording. At the end of the programmed recording time, the TV set remains set to this programme position for the period programmed as the overrun time. For VPSrecordings, the TV set is automatically switched to the programme position from which the recording is to be made at a time which is the number of minutes programm- ed as the VPS lead time before the programmed starting time for the recording. By default, the TV set switches to this pro- gramme position about one hour before the programmed start time for a VPS recording. Setting the lead time, VPS lead time and overrun time • Press the MENU key to open the TV menu. • Press the green key to open the Timer menu. • Use the corresponding numeric key (in the example: #) to select the menu item Recording control. • Use the cursor control key to select the desired menu item. • Press the OK key and then, in the setting win- dow, use the -+ key to set the desired lead or overrun time. • Press the OK key to save the settings. • Press the EXIT key to close the TV menu. The number of subjects and sections depends on the selected scope of operation. Depending on the configuration of the TV set, the various menu items may be displayed in a different order and numbered differently. MENU OK EXIT OK Lead time 5 minLead time with VPS Overrun time Lead time Recording control Timer setting Timer control Reminder Childlock Timer Save with Abort withOKMENU 607 47 2042.A1 Clarus GB 04.12.2007 9:59 Uhr Seite 38
39 16.2 Recording Control Application example: You wish to record a programme received via DVB-T. The programme starts at 22:45 hours, ends at 23:40 hours and is broadcast on ITV. Set up a manual timer as described in Section 17, Special Functions 2 or set a timer with the aid of the EPG as described in Section 20.3 “Using EPG, Recording a Programme. The timer recording does not use VPS. Set the lead time to 3 minutes and the overrun time to 10 minutes. At the programmed start time minus the pro- grammed lead time of three minutes, the TV set is either: - switched on from the standby state (red LED lights) with the programme position for ITV selec- ted, whereby the screen remains dark but the programme is sent via the EURO socket to your recorder, or - switched to the programme position for ITV if it is already switched on. At the programmed end of the recording (at 23:40 hours) the programme position for ITV remains selected for the programmed overrun time of 10 minutes. It is not possible to switch to another pro- gramme position during the programmed lead and overrun times. 607 47 2042.A1 Clarus GB 04.12.2007 9:59 Uhr Seite 39
40 EXIT In the case of TV sets with one front end, the pic- ture in picture function (PIP) can only be used for the superimposition of an AV set. In this regard, the following superimposition options are possible: If an analogue TV station is displayed on the screen, it is only possible to call up the picture of an AV set, which is connected either to the “HDMI” or the “DVI-D” socket. If a digital TV station (DVB-T) is displayed on the screen, it is possible to call up the picture of any AV set, regardless of the socket it is connected to. Activating the PIP function • The F1key is pre-programmed with the picture- in-picture function. • You can use the cursor control keys to move the PIP picture on the screen. The last position to which this picture was set is saved. • By pressing the OK key, you can set the frame of the PIP picture to active (red) or inactive (white). • The contents of the PIP picture can be changed only if its frame is active (red). If you wish to display the picture from a connected AV device as a picture-in- picture, press the AV key and then use the numeric keysto select the desired AV device. • Pressing the red key swaps the contents of the two pictures. • Pressing the green key causes the PIP picture to expand to fill the screen and terminates the PIP function. • To close the PIP picture, press the EXIT key. 17. Special Functions Picture-in-Picture Opening the menu F1 607 47 2042.A1 Clarus GB 04.12.2007 9:59 Uhr Seite 40