Home > Metz > Television > Metz Puros 37 Ml Operating Instructions

Metz Puros 37 Ml Operating Instructions

    Download as PDF Print this page Share this page

    Have a look at the manual Metz Puros 37 Ml Operating Instructions online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 5 Metz manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.

    							21
    Opening the menu
    MENU
    11. General Picture Settings
    Some of the menu items are not available
    in a 2 ** menu.
    The picture settings zoom, vertical position, auto-
    matic zoom and panorama can be set and saved
    as general settings for all programme positions.
    Setting the zoom/panorama mode:
    • Press the MENU key.
    The TV menu appears on the screen.
    • Press the blue key . The
    menu 
    Picture and sound and the
    menu item General picture
    settings are pre-selected.
    • Use the cursor control key 
    to select the menu item
    Brightness.
    • Press the corresponding
    numeric keyto select
    Zoom/Panorama.
    • Use the cursor control key to
    select the desired menu
    items.
    • Use the 
    -+
    key to change the settings for
    Zoom/Panorama.
    • Press the OK key to save the new settings.
    The picture shows the factory settings.
    • Press the EXIT key to close the TV menu.
    The functions Panorama and Zoom
    can be combined with each other.
    
    
    OK
    EXIT
    The number of subjects and sections depends
    on the selected scope of operation. Depending
    on the configuration of the TV set, the various
    menu items may be displayed in a different
    order and numbered differently.
    3) See glossary for an explanation.
    Zoom value 0 Panorama Yes
    Picture pos., vert. 0% Pan. modeNon-linear
    Automatic zoom off
    Picture improvment
    Factory settings
    Zoom/Panorama3)7)
    Noise reduction3)
    Picture sharpness
    Colour impr.
    Colour intensity
    Contrast
    Brightness
    Sound set,.prog.posn
    Sound settings, gen.
    Pict.set.,prog.posn.
    Picture settings, gen.
    Picture-Volume
    Change with
    Accept value with    .–   +OK
    607 47 2042.A1 Clarus GB  04.12.2007  9:59 Uhr  Seite 21
     
    						
    							22
    11.1 Picture Settings for
    Programmes via TV Menu
    Opening the menu
    Picture settings for individual programme
    positions are not available in a 2 ** menu.
    If the standard values do not provide a satisfacto-
    ry picture in some programme positions, you can
    make different settings for these positions which
    override almost all of the general picture settings.
    These individual settings apply only to the pro-
    gramme position for which they are made, and
    they cannot be overwritten with the standard
    values. In addition to the
    general picture settings, the
    individual settings also include
    the settings colour offset,
    colour standard and VCR.
    Individual picture settings for
    programme position xy:
    • Select the programme posi-
    tion whose picture settings
    you wish to change.
    • Press the MENU key.
    The TV menu appears on
    the screen.
    • Press the blue key . The menu Picture and
    sound and the menu item General picture set-
    tings are pre-selected.
    • Use the cursor control key to select the menu
    item Pic. settings for Pr. And press the OK
    key.
    • Use the corresponding numeric keys (in this
    example: 
    for noise reduction) to select the
    desired menu items.
    • In the setting window, use the 
    -+
    key to change
    the setting.
    • Press the OK key to save the new setting.
    • Press the EXIT key to close the TV menu.
    
    2) Possible only on sets equipped with this
    function.
    3) See glossary for an explanation.
    5) Available only for DVB stations!
    7) Available only for analogue stations!
    Noise reduction   lightVCR
    3)
    Picture format5)
    Colour  standard3)7)
    Colour offset3)7)
    Noise reduction3)
    Picture sharpness
    Colour intensity
    Contrast
    Sound set,.prog.posn
    Sound settings, gen.
    Pict.set.,prog.posn.
    Picture settings, gen.
    Picture-Volume
    Change with
    Accept value with–   +OK
    MENU
    OK
    EXIT
    OK
    
    607 47 2042.A1 Clarus GB  04.12.2007  9:59 Uhr  Seite 22
     
    						
    							23
    Opening the menu
    11.2 Picture Settings for 
    Programme via Station Table
    Individual picture settings for
    programme position xy:
    • Select the programme position whose picture
    settings you wish to change.
    • Press the MENU key.
    The TV menu appears on the screen.
    • Press the white key  . The station table is dis-
    played with the currently active programme
    position highlighted.
    • Press the F2key to enable
    editing of the station table.
    • Press the cursor control key
    to move to the subject
    side.
    • Use the corresponding
    numeric keys (in this exam-
    ple: 
     for the picture quali-
    ty) to select the desired
    menu items.
    • In the setting window, use
    the cursor control key to
    select the desired function.
    • Use the 
    -+
    key to change the setting.
    gen. means here that the new setting will
    overwrite the related general picture setting (see
    pages 18).
    The individual settings made here which
    differ from the general settings remain
    saved.
    • Press the OK key to save the new settings.
    • Press the EXIT key to close the TV menu.
    
    OK
    EXIT
    Picture sharpness gen. Noise reduction gen.
    Colour offset 0
    VCR offSound corrections
    Colour standard
    3)7)
    Picture quality
    Picture correct.
    Enter logo
    Station contained in EPG
    Signal quality5)
    DVB-prog. info5)
    Frequency/channel7)
    0010 Hessen 3
    0009 Südwest
    0008 MDR
    0007 PRO 7
    0006 RTL 2
    0005 RTL
    0004 SAT 1
    0003Bayern 3
    0002 ZDF
    0001 ARD
    Station table
    Change with
    Accept value with–   +OK
    ✗
    F1➔
    MENU
    F2
    The number of subjects and sections depends
    on the selected scope of operation. Depending
    on the configuration of the TV set, the various
    menu items may be displayed in a different
    order and numbered differently.
    3) See glossary for an explanation.
    5) Available only for DVB stations!
    7) Available only for analogue stations!
     
    607 47 2042.A1 Clarus GB  04.12.2007  9:59 Uhr  Seite 23
     
    						
    							24
    Opening the menu12. General Sound Settings
    Some of the menu items are not available
    in a 2 ** menu.
    The sound settings volume, treble, bass, stereo
    wide and spatial sound can be set generally for
    all programme positions and saved as standard
    values which can be recalled at any time by pres-
    sing the OK key.
    Opening the sound settings menu:
    • Press the MENU key.
    The TV menu appears on the screen.
    • Press the blue key  . The
    menu 
    Picture and sound and the
    menu item General picture
    settings are pre-selected.
    • Use the corresponding
    numeric key (in the exam-
    ple: 
    ) to select 
    General sound settings.
    • Use the corresponding
    numeric keys to select the
    desired menu items in the
    right-hand column.
    • Press the OK key to open
    the selected menu item for
    editing.
    • In the setting window, use the 
    -+
    key to change
    the setting.
    • Use the cursor control key to select the third
    line Save as standard value.
    • If you wish to save the new setting, use the 
    -+
    key to select Yes.
    • Press the OK key to save the new settings as
    standard values.
    • Press the EXIT key to close the TV menu.
    If the standard values do not provide satis-
    factor y results for some programme posi-
    tions, you can make different individual set-
    tings for these positions. See sections 12.1.
    
    
    MENU
    OK
    EXIT
    !
    The number of subjects and sections depends
    on the selected scope of operation. Depending
    on the configuration of the TV set, the various
    menu items may be displayed in a different
    order and numbered differently.
    2) Possible only on sets equipped with this func-
    tion.
    3) See glossary for an explanation.
    4) Available only if SRS WOW is switched off
    Volume61Standard value50
    Use as default value:Ye sBase width 
    4)
    Spatial sound 4)
    Balance
    Tone setting
    Volume headphones
    Bass
    Treble
    Automatic volume control3)
    SRS WOW 2) 3)
    Volume
    Sound set,.prog.posn
    Sound settings, gen.
    Pict.set.,prog.posn.
    Picture settings, gen.
    Picture-Volume
    Change with
    Accept current 
    value as default
    value.–   +
    F1➔
    607 47 2042.A1 Clarus GB  04.12.2007  9:59 Uhr  Seite 24
     
    						
    							25
    12. General Sound Settings
    Some of the menu items are not available
    in a 2 ** menu.
    Setting SRS-WOW 
    2)
    • Press the MENU key.
    The TV menu appears on the screen.
    • Press the blue key . The menu Picture and
    sound and the menu item General picture set-
    tings are pre-selected.
    • Press the numeric key 
    to
    select General sound set-
    tings.
    • Use the corresponding
    numeric key
    (in the example: 
    ) to
    select SRS–WOW 2).
    • In the setting window, use
    the 
    -+
    key to change the
    setting.
    • Press the OK key to save
    the changed setting.
    • „Press the EXIT key to close the
    TV menu.
    If the SRS-WOW function is
    active, the menu items stereo wide and
    spatial sound are disabled.
    
    
    Opening the menu
    MENU
    OK
    EXIT
    !
    The number of subjects and sections depends
    on the selected scope of operation. Depending
    on the configuration of the TV set, the various
    menu items may be displayed in a different
    order and numbered differently.
    2) Possible only on sets equipped with this
    function.
    3) See glossary for an explanation.
    4) Available only if SRS WOW is switched off
    SRS WOW2)3)          on Base width 
    4)
    Spatial sound 4)
    Balance
    Tone setting
    Volume headphones
    Bass
    Treble
    Automatic volume control3)
    SRS WOW 2) 3)
    Volume
    Sound set,.prog.posn
    Sound settings, gen.
    Pict.set.,prog.posn.
    Picture settings, gen.
    Picture-Volume
    Change with
    Accept value with –   +
    F1➔
    OK
    607 47 2042.A1 Clarus GB  04.12.2007  9:59 Uhr  Seite 25
     
    						
    							26
    Automatic volume correction
    Some TV stations transmit their commercials at a
    higher sound volume than that for the normal pro-
    gramme. In order to save you from adjusting the
    volume each time with the remote control, you can
    activate automatic volume correction.
    With this function active, there is little difference in
    the volume levels for the normal programme and
    the commercials.
    The setting made here applies
    to all programme positions.
    Opening the volume correc
    -
    tion menu:
    • Press the MENU key.
    The TV menu appears on
    the screen.
    • Press the blue key . The
    menu 
    Picture and sound and the
    menu item General picture
    settings are pre-selected.
    • Use the corresponding numeric key (in the
    example: 
    ) to select General sound settings.
    • Use the corresponding numeric key (in the
    example: 
    ) to select Volume correction.
    • In the setting window, use the 
    -+
    key to change
    the setting.
    • Press the OK key to save the new setting.
    • Press the EXIT key to close the TV menu.
    The function Volume correction in the
    menu General sound settings does not
    overwrite the function Volume correction
    in the menu Sound settings for Pr....
    
    Opening the menu12. General Sound Settings
    MENU
    OK
    EXIT
    !!
    The number of subjects and sections depends
    on the selected scope of operation. Depending
    on the configuration of the TV set, the various
    menu items may be displayed in a different
    order and numbered differently.
    2) Possible only on sets equipped with this
    function.
    3) See glossary for an explanation.
    4) Available only if SRS WOW is switched off
    Volume control3)          on Base width 
    4)
    Spatial sound 4)
    Balance
    Tone setting
    Volume headphones
    Bass
    Treble
    Automatic volume control3)
    SRS WOW 2) 3)
    Volume
    Sound set,.prog.posn
    Sound settings, gen.
    Pict.set.,prog.posn.
    Picture settings, gen.
    Picture-Volume
    Change with
    Accept value with –   +
    F1➔
    OK
    607 47 2042.A1 Clarus GB  04.12.2007  9:59 Uhr  Seite 26
     
    						
    							27
    12. General Sound Settings
    Base width and spatial sound
    The menu points base width and spatial
    sound are only shown when the function
    SRR WOW is turned off..
    Base width
    In the case of stereo transmissions, the base width
    (= spatial distance between the loudspeakers) can
    be artificially widened to achieve a larger stereo
    triangle. 
    Spatial sound
    In the case of mono transmis-
    sions, an artificial stereo effect
    can be produced.
    Activate base width/spatial
    sound:
    • Press the MENU key.
    The TV menu appears on the
    screen.
    • Press the blue key . The
    menu Picture and sound
    and the menu item General picture settings
    are pre-selected.
    • Press the numeric key 
    to select General
    sound settings.
    • Select Spatial sound or Base width with key
    allocated, in the example 
    or 0. 
    • In the setting window, use the 
    -+
    key to change
    the setting.
    • Press the OK key to save the changed setting.
    • „Press the EXIT key to close the
    TV menu.
    
    Opening the menu
    OK
    EXIT
    The number of subjects and sections depends
    on the selected scope of operation. Depending
    on the configuration of the TV set, the various
    menu items may be displayed in a different
    order and numbered differently.
    2) Possible only on sets equipped with this
    function.
    3) See glossary for an explanation.
    4) Available only if SRS WOW is switched off
    MENU
    !
    
    Spatial sound onBase width 
    4)
    Spatial sound 4)
    Balance
    Tone setting
    Volume headphones
    Bass
    Treble
    Automatic volume control3)
    SRS WOW 2) 3)
    Volume
    Sound set,.prog.posn
    Sound settings, gen.
    Pict.set.,prog.posn.
    Picture settings, gen.
    Picture-Volume
    Change with
    Accept value with –   +
    F1➔
    OK
    607 47 2042.A1 Clarus GB  04.12.2007  9:59 Uhr  Seite 27
     
    						
    							28
    12.1 Sound Settings for
    Programmes via TV Menu
    Opening the menu
    Some of the menu items are not available
    in a 2 ** menu.
    Volume correction
    Various TV stations broadcast their programmes
    with different sound volumes. This volume diffe-
    rence can be minimised by correcting the volume.
    This adjustment remains active even if the stan-
    dard sound values are recalled.
    Adjusting the volume correc
    -
    tion:
    • Press the MENU key.
    The TV menu appears on
    the screen.
    • Press the blue key . The
    menu 
    Picture and sound and the
    menu item General picture
    settings are 
    pre-selected.
    • Use the corresponding
    numeric key (in the exam-
    ple: 
    ) to select Sound
    settings for Pr..
    • Press the OK key and then, in the setting
    widow, use the 
    -+
    key to change the setting.
    • Press the OK key to save the new settings.
    • Press the EXIT key to close the TV menu.
    Individual sound settings can also be made
    in the station table. 
    
    MENU
    OK
    EXIT
    OK
    
    The number of subjects and sections depends
    on the selected scope of operation. Depending
    on the configuration of the TV set, the various
    menu items may be displayed in a different
    order and numbered differently.
    Volume correction    -15Forced mono
    Tone settings
    Volume correction
    Sound set,.prog.posn
    Sound settings, gen.
    Pict.set.,prog.posn.
    Picture settings, gen.
    Picture-Volume
    Change with
    Accept value with –   +OK
    607 47 2042.A1 Clarus GB  04.12.2007  9:59 Uhr  Seite 28
     
    						
    							29
    12.1 Sound Settings for
    Programmes via TV Menu
    Opening the menu
    Some of the menu items are not available
    in a 2 ** menu.
    Tone setting
    The tone setting can be set to Normal or
    Speech. The setting Speech should be used
    primarily for stations which broadcast mainly pro-
    grammes with a lot of speech, such as news sta-
    tions. The setting Normal is better for music pro-
    grammes.
    Adjusting the 
    tone setting :
    • Press the MENU key.
    The TV menu appears on
    the screen.
    • Press the blue key . The
    menu 
    Picture and sound and the
    menu item General picture
    settings are pre-selected.
    • Use the corresponding
    numeric key (in the exam-
    ple: 
    ) to select 
    Sound settings for Pr..
    • Use the corresponding numeric key (in the
    example: 
    ) to select 
    Tone settings.
    • In the setting window, use the 
    -+
    key to change
    the setting.
    • Press the OK key to save the new settings.
    • Press the EXIT key to close the TV menu.
    Individual sound settings can also be made
    in the station table.
    
    MENU
    
    OK
    EXIT
    The number of subjects and sections depends
    on the selected scope of operation. Depending
    on the configuration of the TV set, the various
    menu items may be displayed in a different
    order and numbered differently.
    7) Available only for analogue stations!
    Tone settings    Speech
    Forced mono7)
    Tone settings
    Volume correction
    Sound set,.prog.posn
    Sound settings, gen.
    Pict.set.,prog.posn.
    Picture settings, gen.
    Picture-Volume
    Change with
    Accept value with –   +OK
    607 47 2042.A1 Clarus GB  04.12.2007  9:59 Uhr  Seite 29
     
    						
    							30
    12.1 Sound Settings for
    Programmes via TV Menu
    Some of the menu items are not available
    in a 2 ** menu.
    Forced mono
    It may happen that your TV set switches from
    mono to stereo in the middle of a programme, alt-
    hough no stereo sound is being transmitted. This is
    generally caused by the local reception condi-
    tions. If you activate Forced mono for the selec-
    ted programme position, all
    programmes from this station
    will be reproduced in mono.
    Activating forced mono:
    • Press the MENU key.
    The TV menu appears on
    the screen.
    •Press the blue key . The
    menu 
    Picture and sound and the
    menu
    item General picture set-
    tings are
    pre-selected.
    • Use the corresponding numeric key (in the
    example: 
    ) to select Sound settings for Pr..
    • Use the corresponding numeric key (in the
    example: 
    ) to select Forced mono.
    • In the setting window, use the 
    -+
    key to change
    the setting.
    • Press the OK key to save the new settings.
    • Press the EXIT key to close the TV menu.
    Individual sound settings can also be made
    in the station table.
    
    
    Opening the menu
    MENU
    !
    OK
    EXIT
    The number of subjects and sections depends
    on the selected scope of operation. Depending
    on the configuration of the TV set, the various
    menu items may be displayed in a different
    order and numbered differently.
    Forced mono   onForced mono
    7)
    Tone settings
    Volume correction
    Sound set,.prog.posn
    Sound settings, gen.
    Pict.set.,prog.posn.
    Picture settings, gen.
    Picture-Volume
    Change with
    Accept value with –   +OK
    607 47 2042.A1 Clarus GB  04.12.2007  9:59 Uhr  Seite 30
     
    						
    All Metz manuals Comments (0)

    Related Manuals for Metz Puros 37 Ml Operating Instructions