Home > Metz > Television > Metz Puros 37 Ml Operating Instructions

Metz Puros 37 Ml Operating Instructions

    Download as PDF Print this page Share this page

    Have a look at the manual Metz Puros 37 Ml Operating Instructions online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 5 Metz manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.

    							31
    12.2 Sound Settings for Prog.
    via the Station Table
    Opening the menu
    Some of the menu items are not available
    in a 2 ** menu.
    Making sound corrections:
    • Select the programme position whose sound set-
    tings you wish to change.
    • Press the MENU key. 
    The TV menu appears on the screen.
    • Press the white key  . The station table is dis-
    played with the currently active programme
    position highlighted.
    • Press the F2key to enable
    editing of the station table.
    • Use the cursor control key 
    to move to the subjects side.
    • Use the corresponding
    numeric keys (in this exam-
    ple: 
    ) for sound correc-
    tions) to select the desired
    menu items.
    • In the setting window, use
    the cursor control key to
    select the desired functions.
    The use of the 
    -+
    key to change the selected set-
    ting. gen. means here that the new setting will
    overwrite the general sound settings (see pages
    24 and 26).
    The individual settings made here, which
    differ from the standard values, remain
    saved.
    Press the OK key to save the new settings.
    Press the EXIT key to close the TV menu.
    
    MENU
    F2
    OK
    EXIT
    
    The number of subjects and sections depends
    on the selected scope of operation. Depending
    on the configuration of the TV set, the various
    menu items may be displayed in a different
    order and numbered differently.
    3) See glossary for an explanation.
    5) Available only for DVB stations!
    7) Available only for analogue stations!
    Volume correction 0 Tone settings gen.
    Forced mono7)offSound corrections
    Colour standard
    3)7)
    Picture quality
    Picture correct.
    Enter logo
    Station contained in EPG
    Signal quality5)
    DVB-prog. info5)
    Frequency/channel7)
    0010Hessen 3
    0009Südwest
    0008MDR
    0007PRO 7
    0006RTL 2
    0005RTL
    0004SAT 1
    0003Bayern 3
    0002ZDF
    0001 ARD
    Station table
    Change with
    Accept value with–   +OK
    ✗
    F1➔
    607 47 2042.A1 Clarus GB  04.12.2007  9:59 Uhr  Seite 31
     
    						
    							32
    Opening the menu13. Automatic zoom
    The menu item Automatic zoom is not
    available in a 2 ** menu.
    When the automatic zoom function is active, pro-
    grammes in a widescreen format (such as pro-
    grammes in 16:9) are expanded to fill as much of
    the screen as possible.
    If the function is inactive, the programmes are dis-
    played in their original format.
    Activating the automatic zoom 
    2)
    • Press the MENU key. The TV menu appears on
    the screen.
    • Press the blue key  . The
    menu 
    Picture and sound and the
    menu item General picture
    settings are pre-selected.
    • Use the cursor control key 
    to select the menu item
    Brightness.
    • Use the corresponding
    numeric key (in the exam-
    ple: 
     ) to select the func-
    tion Zoom/Panorama.
    • Use the cursor control key 
    to select the menu item
    Automatic zoom.
    • Use the 
    -+
    key to change the setting.
    • Press the OK key to save the new setting.
    • Press the EXIT key to close the TV menu.
    
    MENU
    OK
    EXIT
     
    The number of subjects and sections depends
    on the selected scope of operation. Depending
    on the configuration of the TV set, the various
    menu items may be displayed in a different
    order and numbered differently.
    Zoom value 0 Panorama Yes
    Picture pos., vert. 0% Pan. modeNon-linear
    Automatic zoom on
    Picture improvment
    Factory settings
    Zoom/Panorama3)7)
    Noise reduction3)
    Picture sharpness
    Colour impr.
    Colour intensity
    Contrast
    Brightness
    Sound set,.prog.posn
    Sound settings, gen.
    Pict.set.,prog.posn.
    Picture settings, gen.
    Picture-Volume
    Change with
    Accept value with    .–   +OK
    607 47 2042.A1 Clarus GB  04.12.2007  9:59 Uhr  Seite 32
     
    						
    							33
    Opening the menu14. Childlock
    With the aid of the childlock function, you can
    determine whether or not the TV set can be swit-
    ched on and which stations may be selected at
    which times. The childlock can be set such that:
    a) it is always active,
    b) one to six TV, radio or AV programmes (Prog A
    ... Prog F) are exempted from the locking func-
    tion (permitted programmes), or
    c) all programmes, or programmes which are not
    locked, may be viewed during a permitted time
    period (TV start – TV end).
    The childlock must be saved once with a 4-digit
    code (password).
    a) Activating the childlock
    • Press the MENU key.
    The TV menu appears on
    the screen.
    • Press the green key  to
    open the menu Timer.
    • Use the cursor control key 
    to select Settings and
    press the OK key.
    • In the setting window, use
    the cursor control key to
    select the menu item Acti-
    vate and then use the 
    -+
    key to set the childlock to Active.
    • Use the cursor control key to select Code
    and enter your personal 4-digit code with the
    numeric keys. 
    Make a note of this code!
    • Press the OK key to save the new setting.
    • Press the EXIT key to close the TV menu.
    The number of subjects and sections depends
    on the selected scope of operation. Depending
    on the configuration of the TV set, the various
    menu items may be displayed in a different
    order and numbered differently.
    MENU
    OK
    OK
    EXIT
    Start viewing time --:-- End viewing time --:--
    Code **** Activation on
    Permitted AV prog.
    Permitted radio prog.
    Permitted TV prog.
    Settings
    Recording control
    Timer setting
    Timer control
    Reminder
    Childlock
    Timer
    Change with
    Accept value with    .–   +OK
    607 47 2042.A1 Clarus GB  04.12.2007  9:59 Uhr  Seite 33
     
    						
    							34
    b) Permitted programmes:
    Activate the childlock as described in step a).
    Use the corresponding numeric key to select the
    menu item Permitted xx progs. (xx = TV, radio
    or AV). Press the OK key and, in the setting win-
    dow, enter the programme positions with the
    numeric keys or use the 
    -+
    key to select the des-
    ired programme positions.
    • Press the OK key to save the new settings.
    c) TV start – TV end
    Activate the childlock as des-
    cribed in step a). In the setting
    window, use the cursor control
    key to select the start and end
    times and enter the desired
    times with the numeric keys.
    Press the OK key to save the
    settings.
    Protecting the childlock
    settings with your code
    • Use the cursor control key to
    select Code and enter your
    personal code (password)
    with the numeric keys.
    Make a note of this code, since the child
    lock can be deactivated only if the correct
    code is entered !
    • Press the OK key to save the settings.
    • Press the EXIT key to close the TV menu.
    • Switch off the TV set with the  key.
    The childlock is not fully activated until the
    TV set is switched off.
    Deactivating the childlock
    If the childlock is active, a window requesting your
    personal code is displayed each time the TV set is
    switched on. Entering the correct code enables the
    TV set and it can then be used normally until it is
    switched off again. To cancel the childlock func-
    tion, proceed as described in step a), above, and
    set the childlock to Inactive.
    
    
    Opening the menu14. Childlock
    
    Factory settingCode: 0000
    ✂
    Prog A Kabel 1 Prog B -----
    Prog C ----- Prog D -----
    Prog E ----- Prog F -----
    Permitted AV prog.
    Permitted radio prog.
    Permitted TV prog.
    Settings
    Recording control
    Timer setting
    Timer control
    Reminder
    Childlock
    Timer
    Enter programme
    position and save
    with     .
    : clear.
    OKII
    607 47 2042.A1 Clarus GB  04.12.2007  9:59 Uhr  Seite 34
     
    						
    							35
    The menu item Reminder is not available
    in a 2 ** menu.
    If you wish to be reminded of something while
    watching TV, you can set a reminder for any des-
    ired time. At this time, a window with the remin-
    der appears on the screen.
    Setting the reminder time
    • Press the MENU key to open the TV menu.
    • Press the green key  to open the Timer
    menu.
    • Press the numeric key 
    to
    select Reminder.
    • Press the OK key and
    then, in the setting window,
    enter the desired time (four
    digits) with the numeric
    keys.
    • Press the OK key to save
    this setting.
    • Press the EXIT key to close
    the
    TV menu.
    At the programmed time, a window with the
    reminder is displayed on the screen. You can close
    this window by pressing any key on the remote
    control.
    If you do not want the reminder
    to appear ever y day, you must clear the
    time in the menu by pressing the ll key.
    
    
    Opening the menu15. Reminder
    MENU
    OK
    EXIT
    OK
    
    The number of subjects and sections depends
    on the selected scope of operation. Depending
    on the configuration of the TV set, the various
    menu items may be displayed in a different
    order and numbered differently.
    Time    --:--
    Reminder Recording control
    Timer setting
    Timer control
    Reminder
    Childlock
    Timer
    Clear the time withSave with
    Abort withOKII
    MENU
    607 47 2042.A1 Clarus GB  04.12.2007  9:59 Uhr  Seite 35
     
    						
    							36
    The menu items On time and Off time
    are not available in a 2 ** menu.
    In the menu item Timer control, you can pro-
    gramme a switch-on time, a switch-off time and a
    sleep timer (switch off after ...).
    The switch-on timeis the time at which the TV set
    is to be switched on automatically. 
    The switch-off timeis the time at which the TV set
    is to be switched off automatically. 
    The sleep timer(switch off after...) switches off the
    TV set after a programmed delay (which can be
    set in steps of 15 minutes).
    Setting the on time and of
    f
    time
    • Press the MENU key to
    open the TV menu.
    • Press the green key  to
    open the Timer menu.
    • Press the numeric key 
    !to
    select Timer control.
    • 
    Press the OK key and then,
    in the setting window, enter
    the desired time (four digits)
    with the numeric keys.
    • Press the OK key to save the setting.
    • Press the EXIT key to close the TV menu.
    At the programmed on time, the TV set is switched
    on from the standby state (red LED lights). You
    must confirm this automatic action by pressing
    any key on the remote control. If this is not done,
    the TV set will switch back to the standby state
    after 10 minutes. This ensures that the TV set does
    not stay on if you are not at home.
    If you do not want to have the TV set switch
    itself on each day, you must clear the on and
    off times in the menu by pressing the ll key.
    
    16. Timer ControlOpening the menu
    MENU
    OK
    EXIT
    OK
    !
    The number of subjects and sections depends
    on the selected scope of operation. Depending
    on the configuration of the TV set, the various
    menu items may be displayed in a different
    order and numbered differently.
    Time    --:--Switch off after...
    Switch-off time
    Switch-on time
    Recording control
    Timer setting
    Timer control
    Reminder
    Childlock
    Timer
    Clear the time withSave with
    Abort withOKII
    MENU
    607 47 2042.A1 Clarus GB  04.12.2007  9:59 Uhr  Seite 36
     
    						
    							37
    Normally, the TV set will determine the current date and
    time from the Teletext signals of the currently selected
    station (providing this station sends Teletext).
    Note: For this the device must be turned on with
    the mains switch.
    If this is not the case, or if an incorrect date or
    time is displayed, you can set the date and time
    manually.
    In almost all cases, you will not need to do this.
    Even the changeover between winter time and
    summer time is executed automatically.
    Setting the time and date manually:
    • Press the MENU key to
    open the TV menu.
    • Press the green key  to
    open the Timer menu.
    • Press the numeric key 
    to
    select Time settings.
    • Press the OK key and
    then, in the setting window,
    enter the current time with
    the numeric keys.
    • 
    You can then start the internal
    clock precisely by pressing
    the OK key when the time
    you have entered is reached.
    • Press the numeric key to select 
    Current date.
    • In the setting window, enter the date with the
    numeric keys.
    • Press the OK key to save the settings.
    • Press the EXIT key to close the TV menu.
    The local time offset is the difference between
    the local time where the TV set is installed and
    Greenwich Mean Time (GMT). The TV set nor-
    mally detects this time offset and also the addi-
    tional changeover to summer time.
    The time needs to be set manually only if it is
    not detected automatically.
    i
    16.1 Setting the Time and DateOpening the menu
    MENU
    OK
    EXIT
    OK
    OK
    
    
    Time    20:00:00Local time offset
    Current date
    Current lokal time
    Recording control
    Timer setting
    Timer control
    Reminder
    Childlock
    Timer
    Save with
    Abort withOKMENU
    607 47 2042.A1 Clarus GB  04.12.2007  9:59 Uhr  Seite 37
     
    						
    							38
    16.2 Recording ControlOpening the menu
    This menu item is not available in a 2 ** menu.
    In the menu item Recording control, you can set a
    lead time and an overrun time for timer recordings.
    The TV set is automatically switched to the pro-
    gramme position from which the recording is to
    be made at a time which is the number of minutes
    programmed as the lead timebefore the pro-
    grammed starting time for the recording.
    At the end of the programmed recording time, the
    TV set remains set to this programme position for
    the period programmed as the overrun time.
    For VPSrecordings, the TV set
    is automatically switched to the
    programme position from
    which the recording is to be
    made at a time which is the
    number of minutes programm-
    ed as the VPS lead time before
    the programmed starting time
    for the recording. By default,
    the TV set switches to this pro-
    gramme position about one
    hour before the programmed
    start time for a VPS recording.
    Setting the lead time, VPS lead time and overrun time 
    • Press the MENU key to open the TV menu.
    •
    Press the green key  to open the Timer menu.
    • Use the corresponding numeric key (in the example:
    #) to select the menu item Recording control.
    • Use the cursor control key to select the desired
    menu item.
    • Press the OK key and then, in the setting win-
    dow, use the 
    -+
    key to set the desired lead or
    overrun time.
    • Press the OK key to save the settings.
    • Press the EXIT key to close the TV menu.
    
    The number of subjects and sections depends
    on the selected scope of operation. Depending
    on the configuration of the TV set, the various
    menu items may be displayed in a different
    order and numbered differently.
    MENU
    OK
    EXIT
    OK
    
    Lead time    5 minLead time with VPS
    Overrun time
    Lead time
    Recording control
    Timer setting
    Timer control
    Reminder
    Childlock
    Timer
    Save with
    Abort withOKMENU
    607 47 2042.A1 Clarus GB  04.12.2007  9:59 Uhr  Seite 38
     
    						
    							39
    16.2 Recording Control
    Application example:
    You wish to record a programme received via
    DVB-T. The programme starts at 22:45 hours,
    ends at 23:40 hours and is broadcast on ITV.
    Set up a manual timer as described in Section
    17, Special Functions 2 or set a timer with the
    aid of the EPG as described in Section 20.3
    “Using EPG, Recording a Programme. The timer
    recording does not use VPS.
    Set the lead time to 3 minutes and the overrun
    time to 10 minutes.
    At the programmed start time minus the pro-
    grammed lead time of three minutes, the TV set is
    either:
    - switched on from the standby state (red LED
    lights) with the programme position for ITV selec-
    ted, whereby the screen remains dark but the
    programme is sent via the EURO socket to your
    recorder, or
    - switched to the programme position for ITV if it is
    already switched on.
    At the programmed end of the recording (at
    23:40 hours) the programme position for ITV
    remains selected for the programmed overrun time
    of 10 minutes.
    It is not possible to switch to another pro-
    gramme position during the programmed
    lead and overrun times.
    
    607 47 2042.A1 Clarus GB  04.12.2007  9:59 Uhr  Seite 39
     
    						
    							40
    EXIT
    In the case of TV sets with one front end, the pic-
    ture in picture function (PIP) can only be used for
    the superimposition of an AV set. 
    In this regard, the following superimposition
    options are possible: 
    If an analogue TV station is displayed on the
    screen, it is only possible to call up the picture of
    an AV set, which is connected either to the
    “HDMI” or the “DVI-D” socket. 
    If a digital TV station (DVB-T) is displayed on the
    screen, it is possible to call up the picture of any
    AV set, regardless of the socket it is connected to. 
    Activating the PIP function
    • The F1key is pre-programmed with the picture-
    in-picture function.
    • You can use the cursor control keys to move
    the PIP picture on the screen. The last
    position to which this picture was set is
    saved.
    • By pressing the OK key, you can set
    the frame of the PIP picture to active
    (red) or inactive (white).
    • The contents of the PIP picture can
    be changed only if its frame is active
    (red). 
    If you wish to display the picture from
    a connected AV device as a picture-in-
    picture, press the AV key and then
    use the numeric keysto select the desired AV
    device.
    • Pressing the red key  swaps the contents of
    the two pictures.
    • Pressing the green key  causes the PIP picture
    to expand to fill the screen and terminates the
    PIP function.
    • To close the PIP picture, press the EXIT key.
    17. Special Functions
    Picture-in-Picture
    Opening the menu
    F1
    607 47 2042.A1 Clarus GB  04.12.2007  9:59 Uhr  Seite 40
     
    						
    All Metz manuals Comments (0)

    Related Manuals for Metz Puros 37 Ml Operating Instructions