Midway Cruis N Exotica Conversion Kit Installation Manual


&58,6·1(;27,&$Œ
™
 Before servicing electronics, turn off AC power to the VGM. Wait for capacitors to discharge.
 Before touching or handling electronic assemblies, discharge static electricity on your body. To dis-
charge static, begin by connecting the line cord to a properly grounded outlet, but do not turn on the 
power! Next, touch the safety ground stud of the power supply chassis.
 Store electronic assemblies in an anti-static area. Use anti-static bags to store or transport...

7528%/(6+227,1* 0,:$

&58,6·1(;27,&$Œ7528%/(6+227,1*
START UP TROUBLESHOOTING 
Symptom Cause Required Action
Video Game Machine 
(VGM) does not start.
VGM appears com-
pletely non-functional.
No audio
No illumination
No video displayPower problem 1. Check power is switched on.
2. Make sure fans are turning. If not: Is the power
supply connected to its power cable? Is power
supply turned on?
3. Plug cord into AC power outlet. Verify presence of
AC line voltage.
Improper line volt-
age switch setting1. Turn off power....

7528%/(6+227,1* 0,:$

&58,6·1(;27,&$Œ7528%/(6+227,1*
LINKING PROBLEM TROUBLESHOOTING 
Symptom Cause Required Action
Cannot connect multi-
ple game machines 
togetherFaulty wiring  1. Do not extend linking cables supplied with VGM.
2. Do not use standard telephone type couplers or
wiring for linking.
Improper linking 
hardware1. Use required Fire Wire cable. 
2. Array completion requires basic kit brackets and
spacers.
VGM does not recog-
nize other players in 
linking operation
VGM functions nor-
mally by itselfImproper...

7528%/(6+227,1* 0,:$

&58,6·1(;27,&$Œ7528%/(6+227,1*
Sloppy, unpredictable 
or ineffective steering
Video is present
Video Game Machine 
(VGM) operates nor-
mallyBlocked or faulty 
fanFan located on power supply functions as an exhaust
fan. With power on, check airflow near each fan to
assure that nothing blocks airflow. 
Faulty mechani-
cal partsTurn off power. Open dashboard. Support steering
wheel and remove outer mounting screws. Remove
metal shield (if VGM has one) over motor. Inspect for
faulty or worn belts,...

7528%/(6+227,1* 0,:$

&58,6·1(;27,&$Œ7528%/(6+227,1*
Power Problems 1. Turn on Power. Use 20-volt DC setting on digital
voltmeter to measure DC voltages present at
Power connector pins. Verify +5V source if it is
adjustable. Refer to Cabinet Wiring Diagram for
specific wiring information and voltage limits.
2. Use 2-Volt AC setting on digital voltmeter to mea-
sure DC voltages at Power Connector pins. Any
reading indicates the supply voltages are unstable
and may contain ripple or noise.
White areas at screen 
edges appear...

7528%/(6+227,1* 0,:$