Miele G 1202 Sci Operating Instructions

Detergent
,Only use detergents formulated
for domestic dishwashers. Do not
use washing-up liquid.
Miele branded dishwasher cleaning
products are available from the Miele
Spare Parts Department or via the
Internet at www.miele-shop.com.
Active ingredients
Modern detergents contain various
active ingredients, the most important
of which are:
– Phosphates to prevent calcification.
– Alkalis to aid removal of dried on
soiling.
– Enzymes to break down starch and
dissolve protein.
– Oxygen based bleaching...

,Avoid inhalation of powder
detergents and do not ingest
dishwasher detergent. Dishwasher
detergents contain irritant or corrosive
ingredients which can cause burning
in the nose, mouth and throat if
swallowed, or inhibit breathing.
Consult a doctor immediately if
detergent has been swallowed or
inhaled.
Keep detergent and other household
agents out of the reach of children at
all times. Keep children away from the
dishwasher when the door is open.
There could still be detergent residues
in the cabinet....

Switching on
^Make sure the spray arms are not
obstructed.
^Close the door.
^Open the stopcock, if it is closed.
^Switch the dishwasher on with the
On/Off buttonK.
The Start/Stop indicator light flashes
and the indicator light comes on next to
the last programme selected.
Selecting a programme
Choose your programme according to
the type of load and how dirty it is.
The different programmes and their
uses are described in the Programme
Chart later on in this booklet.
Starting a programme
^Select the...

Time display
The duration of the programme
selected appears in hours and minutes
in the Time display before the
programme begins. During the
programme the time left until the end of
the programme is displayed.
The time displayed may vary with the
same programme. This can be due to
the water temperature at each intake,
the reactivation cycle and the amount
of crockery and how dirty it is.
To save energy the time display goes
out after a few minutes if you do not
press any buttons during this time.
Press...

Unloading the dishwasher
Dishes tend to break and chip more
easily when they are hot.
Allow the dishes to cool until they are
comfortable enough to handle before
unloading them.
If you open the door fully after switching
off, the dishes will cool much faster.
^First unload the lower basket, then
the upper basket and cutlery tray
(depending on model).
This will prevent water drops from the
upper basket and cutlery tray from
falling onto the dishes in the lower
basket.
Interrupting a programme
A programme...

Extra options
The Extras button is used for selecting
the Turbo and Combi tabs options.
^Switch the dishwasher on with the
On/Off buttonK.
The Start/Stop indicator light will flash.
^Press the Extras button repeatedly
until the indicator light for the option
you want comes on.
The option selected is active on all
programmes until the setting is
changed.
^You can now start a programme.
Turbo
The Turbo function is used to reduce
the duration of programmes in which
this function is available.
In order to...

Delay start
The start time of a programme can be
delayed, e.g. to benefit from economy
rates of electricity. A delay start time of
between 30 minutes and 24 hours can
be selected.
With a delay start time of between 30
minutes and 9 hours 30 minutes, the
time is set in 30 minute increments. For
10 hours or more it is set in one hour
increments.
When using the Delay start function,
make sure that the detergent
compartment is dry before adding
detergent. Wipe dry with a cloth if
necessary. If the...

The time starts counting down until the
programme start time: in 1 hour steps
for delay start periods of over 10 hours,
and in minutes for delay start periods of
under 10 hours.
At the end of the delay period, the
programme selected begins
automatically. The time left for a
programme to run then shows in the
display, the Delay start indicator light
goes out and the Start/Stop indicator
light comes on.
How the Delay start time is shown in
the Time display:
up to 59 minutes:
e.g. 30 minutes =30
between 1...

Factory default setting
If you have altered any settings from
the factory default, you can re-set them
back to the factory default settings as
follows:
^Switch the dishwasher off with the
On/Off buttonK.
^Press the Start/Stop button in and
whilst holding it inswitch the
dishwasher on using the On/Off
buttonK.
Keep the Start/Stop button pressed in
until the Start/Stop indicator light
comes on.
If this does not happen, start the
procedure from the beginning again.
^Press the Delay start button twelve...

Adjust Sensor wash
You can adjust the Sensor wash
programme so that it will remove
stubborn soiling in a lightly soiled load.
^Switch the dishwasher off with the
On/Off buttonK.
^Press the Start/Stop button in and
whilst holding it inswitch the
dishwasher on using the On/Off
buttonK.
Keep the Start/Stop button pressed in
until the Start/Stop indicator light
comes on.
If this does not happen, start the
procedure from the beginning again.
^Press the Delay start button five
times.
The Delay start indicator...