Miele H 5981 Bp Manual

Disposal of the packing
material
The transport and protective packing
has been selected from materials which
are envoronmentally friendly for
disposal, and should be recycled.
Ensure that any plastic wrappings,
bags, etc. are disposed of safely and
kept out of the reach of babies and
young children. Danger of suffocation.
Disposing of your old
appliance
Electrical and electronic appliances
often contain materials which, if
handled or disposed of incorrectly,
could be potentially hazardous to
human health...

H 5981 BP
Control panel
Door lock for pyrolytic operation
Top heat/grill element
Steam inlet openings for Moisture plus
Back panel with air inlets for the fan and receiver for the wireless food probe
Side runners with three shelf levels
Water intake tube for the steam injection system
	Wireless food probe holder

Door
Guide to the appliance
12 

Oven controls
In addition to operating the various
cooking programmes to bake, roast
and grill, the controls also offer the
following:
–a time of day display,
–a minute minder,
–a timer for programming cooking
durations,
–user programmes,
–automatic programmes,
–settings that can be customised.
Auto sensor
This sensor controls
– the cooking duration of the automatic
programmes. This will be indicated in
the display.
– the cooling fan run-on time.
– the duration of the pyrolytic cleaning
process.
Safety...

Energy saving features
Lighting
The oven lighting is set to switch off
15 seconds after the start of a cooking
programme (default setting). See
Settings - Lighting.
Door contact switch
If the oven door is opened during
operation, the door contact switch
automatically switches off the heating
elements and the fan, if a Fan setting
is being used. This helps reduce the
amount of heat lost from the oven
interior, e.g. when basting roast meat.
At the same time, the oven lighting is
switched on.
Using residual...

Moisture plus recipe booklet
This separate booklet supplied with
your oven in addition to these
Operating and installation instructions
contains recipes and information on
using Automatic programmes with
Moisture plus and the Moisture plus
function.
Speedlight illumination
The Speedlight illumination beneath the
control panel
– lights up yellow when the oven is
switched off.
– then changes colour during the
heating up phase. When the required
temperature is reached it lights up
red.
You can change the...

Universal tray and rack with anti-tip
safety notches
The universal tray and rack are inserted
into the oven between the two rails of a
shelf runner.
Both the universal tray and rack have
non-tip safety notches which prevent
them being pulled right out when they
only need to be partially pulled out.
When pushing the rack back in,
always ensure that the safety
notches are at the rear of the oven
(see illustration).They can then only be taken out of the
oven by raising them upwards and then
pulling them...

FlexiClip telescopic runners
The FlexiClip telescopic runners can be
clipped into any of the existing shelf
runners and pulled out of the oven to
their fullest extent.
Push the telescopic runners right in
before placing a tray or rack on
them.
To prevent the risk of a rack or tray
sliding off the runners, make sure that
they are sitting securely on their
runners in between the stoppers at
either end of each runner.
The FlexiClip runners can support a
maximum load of 15 kg.Fitting the FlexiClip telescopic...

Changing the position of the
FlexiClip telescopic runners
Make sure that the oven has cooled down
before moving the FlexiClip runners.
Take care not to burn yourself on them.
To change the position of the FlexiClip
runners:
Remove the FlexiClip runners from
their original position by raising them
at the front, then pulling them
forwards and out.
Insert them at the required shelf level;
see Features - Fitting the FlexiClip
telescopic runners.
Food probe
This appliance is supplied with a
wireless food...

Miele@home enabled appliances send information via the household wiring
networkto the master appliance/about the operational status of the
appliances, as well as information about the progress of the programme.
These instructions are for a
communication enabled oventhat
can be linked into the Miele@home
system via a Miele@home installation kit
and a communication module
(optional accessories).
The Miele@home installation kit has
to be fitted by a Miele service
technician.
Information is displayed...

The appliance is operated via the displayand the electronic sensors next to
and below the display. These react to finger contact. A keypad tone will sound
each time a sensor is touched. The volume of the keypad tone can be adjusted or
switched off altogether (see Settings - Volume - Keypad tone).
Sensors
Meaning
Sensors
When the appliance is switched on, the allocations for these sensors
appear in the display.
Sensors which can be used in a programme are lit up.
ON/OFF sensor
For switching the...