Miele H 5981 Bp Manual

Catalyser
On
(Factory default)
The catalyser is always switched on.
Off next programme only
The catalyser will be switched off for
the next programme only.
Cooling fan run-on
The cooling fans will continue to run for
a while after the oven has been
switched off to prevent any humidity
building up in the oven, on the control
panel or in the oven housing unit.
Sensor controlled
(Factory default)
The auto sensor will switch off the
cooling fans.
Temperature controlled
The cooling fans will switch off...

Start
Automatic
(Factory default setting)
A programme will start automatically
approx. 20 seconds after making
your last entry without having to
select Start.
Manual
If Manual has been selected, Start
will appear at the beginning of each
programme and must be confirmed
before the programme will start.
Recommended temperatures
If you frequently change a
recommended temperature it may be a
good idea to change it permanently.
The recommended temperatures is
displayed next to the function.
When you select...

Keypad tone
The volume of the keypad tones, which
beep when touched, can be changed
or the sound switched off completely.

Factory default: Three illuminated
segments.
To change the volume touch the sensor
next to Quieter or Louder.
If all segments are illuminated the
volume is on maximum.
If none of the segments are illuminated
the volume has been turned off.
Welcome melody
On
(Factory default)
A melody will be heard when the
oven is switched on.
Off
No melody will be heard when the
oven...

Safety
The options are:
System lock

In operation lock
System lock

The lock prevents the oven being
switched on unintentionally, by children
for example.
The system lock has to be set to
Permitted (activated) in order to use it.
Permitted
The system lock is active.
The
symbol appears in the
display as soon as the appliance is
switched off. The system lock can
now be used.
Not permitted
(Factory default)
The system lock is deactivated.
To switch the system lock on or off
Touch the sensor next to...

Units
Temperature
°C
(Factory default)
°F
Showroom programme
Off
(Factory default)
Demo programme
Continuous loop
Demo mode
This programme is for dealers who
want to demonstrate the appliance
without the heater elements working.
Do not activate this setting for domestic
use!
If you select and activate this option by
mistake, you can deactivate it as
follows:
–
Demo programme
Select the Off option and follow the
instructions in the display.
–
Continuous loop
–
Demo mode
Touch one of the sensors next...

Miele branded cleaning and
conditioning products are available
from the Miele Spare Parts Department
or via the internet on
www.miele-shop.com.
Do not use a steam cleaner to
clean the appliance. The steam
could reach electrical components
and cause a short circuit.
Appliance front
Remove any soiling immediately.
If this is not done, it might become
impossible to remove and could
cause the surface to alter or
discolour.
Clean the front using a damp Miele
microfibre E-cloth or with a clean
sponge and a...

Accessories
Remove all accessories as well as
the runners and accessories such
as FlexiClip runners from the oven
interior before starting the pyrolytic
cleaning process. The high
temperatures needed for pyrolysis
will damage the accessories, and
the damage to the FlexiClip runners
could be irreparable.
Universal tray
The surface has been treated with
PerfectClean enamel.
Please refer to the section on
PerfectClean for information on
cleaning and care.
Rack, runners
The surface has been treated with...

Normal soiling
Clean the surfaces of the runners using
a damp Miele microfibre E-Cloth or with
a clean sponge and a solution of hot
water and washing-up liquid. Wipe dry
using a soft cloth.
Remove any cleaning agent residues
thoroughly.
Heavy soiling
If necessary, the scouring pad on the
reverse of a washing-up sponge can be
used to clean the runners. Cleaning
may be easier if the soiling is first
dampened with a solution of hot water
and washing-up liquid for a few
minutes.
For very heavy soiling the...

PerfectClean
Thesurfaceof the universal tray and
the anti-splash insert has been treated
with a special type of enamelling called
PerfectClean.
This surface has very good anti-stick
properties and is much easier to keep
clean than conventional oven enamel, if
cleaned regularly.
Food can be taken off it more easily,
and soiling from baking and roasting is
easier to remove.
The following notes on cleaning and
care should ensure that the anti-stick
and easy clean properties of
PerfectClean last for many...

Allow the PerfectClean surfaces to cool
down to room temperature before
applying an oven spray.
Apply a spray oven cleaner to the
soiled areas. Leave to take effect fora
couple of minutes only!
If necessary use a soft sponge, soft
nylon brush or a scraper suitable for
glass surfaces to loosen the soiling.
Repeat the process if necessary.
After cleaning, rinse thoroughly with
clean water and then dry thoroughly.
For optimum performance of
PerfectClean enamel it is important to
clean the oven and...