Motorola S11 Manual

MOTOROLA 
S11-FLEX HD
EN 

Hendrix
Stere o Heads et
EN
GSG 

1
EN Check it out
Check it outhere’s what you can do
Your MOTOROLA S11-FLEX HD wireless Bluetooth® 
headset. Move freely around the house listening to rich 
premium sound wirelessly from your smartphone. Set 
your preferred bass and treble level settings on the 
headset to hear the music the way you like it. Enjoy 
crystal clear conversations on your phone in high 
definition.
Go ahead, check it out:
At a glance  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ....

2At a glance EN
At a glancethe important bits, quick and easy
Tip: Be sure to completely close the USB charging cover 
to protect it from water or sweat damage.
Charg ing & Headset Status
Power
(Right Ear)
Red/Yellow   charging
Green     fully charged Music & Calls
(Left Ear)
Power
Button
Volume
Buttons
Multifunction
(MFB) Button
Phone
Tablet
ComputerConnectionsCalls
Music
We aring
Choose ear gel.
Choose gels that 
create an optimal fitC1
Notification lightMicro USB 
charging 
port
3Place on ear and...

3
EN Connect & go
Connect & golet’s get you connected
Turn Bluetooth on
for your device.Tuf
1
On
3
Enter “0000 ” 
if prompted.
Enter passcode.
Complete.C4
2
Status Light - 
Flashing BlueTurn headset on (charge before use).
Voice prompt: 
“ready to pair”
Follow voice prompts.
Voice prompt: 
“Device 1 connected” 

4Basics EN
Basicsstandard features, advanced quality
Music
Calls
To …
play/pause 
music Press the MFB button once.
skip to next 
trackPress the MFB button two 
times.
skip to previous 
track Press the MFB button three 
times.
change music 
bass/treble 
settingPress and hold MFB button 
until you hear a voice 
prompt.
To …
answer a call Press the MFB button.
reject a call Press and hold a Volume 
button until you hear a tone. 

5
EN Basics
Note:  Some features are phone/network dependent.
Note:  Using a mobile device or accessory while driving 
may cause distraction and may be illegal. Always obey 
the laws and drive safely.
make a voice 
dial call Press and hold the MFB 
button until you hear a tone.
mute or 
unmute a call Press and hold both Volume 
buttons at the same time until 
you hear “mute on” or “mute 
off”
.
end a call Press the MFB button.
answer second 
incoming call Press the MFB button.
reject second 
incoming...

6Advanced EN
Advancedmore clever stuff
Second device?
Do you use two phones? Or maybe a tablet and a 
phone? Pair with two devices using integrated 
multipoint technology.
•See “Connect & go ” on page 3 to pair second device. 
Headset remains in pairing mode for five minutes 
after turning on.
 Once paired, to connect to both devices simply turn 
them on.
Calls
Follow the voice prompts for features such as voice dial, 
answer call, and end call.
Music
Select a music source to listen to by streaming music...

7
EN Advanced
Notification light
An easy way to check your headset.
Settings
Press and hold the Power and MFB buttons together to 
hear settings. Follow the voice prompts to change them:
 Reset headset
Caution:  Reset erases all paired devices stored in 
your headset.
 Voice prompts on/off
 Caller ID on/off
If light shows… your headset is…
blue flash turning on and in pairing mode
steady blue connected to your device(s)
red flash in a low battery state
fading blue turning off 

8Connect with Motorola EN
Connect with Motorola
  Guides, online help, and more at 
www.motorola.com/support.
 Support:  Visit www.motorola.com/support
 or contact 
the Motorola Customer Support Center at: 
1-800-331-6456 (United States), 1-888-390-6456 
(TTY/TDD United States for hearing impaired), or 
1-800-461-4575 (Canada).
 Bluetooth:  If you have questions or need assistance, 
contact us at 1-877-MOTOBLU, or visit 
www.motorola.com/bluetoothsupport
 or 
www.motorola.com/bluetoothconnect.